Electronics Finder Manufacturers T TRACO POWER THB3-0515
About product Specifications Datasheet FAQ

TRACO POWER THB3-0515

Image of TRACO POWER THB3-0515

Description

3 W, 4.5 -9 VDC Vin, Single Output, 24 V@0.13 A Medical DC-DC Converter

Part Number

THB3-0515

Price

Request Quote

Manufacturer

TRACO POWER

Lead Time

Request Quote

Category

Capacitors »  DC-DC Converter

Specifications

Manufacturer

Traco Power

Manufacturers Part #

THB3-0515

Industry Aliases

THB 3-0515

Brand

TRACO POWER

Series

THB 3

Factory Pack Quantity

10

Application

General Purpose

Connection Type

Through Hole

Dimensions

1.25 x 0.80 x 0.41"

Efficiency

76%

Environmental Conditions

General Purpose

Industry

Medical

Input Type

2:1

Input Voltage Nominal

12, 24, 48, 5

Isolation

4000 VAC

Mechanical Style

Isolated

Mounting

PCB Mount

Number of Outputs

1

Operating Temperature

-40 to +71°C, derate 3%/K above +60°C

Output Amps 1

0.13 A

Output Voltage V1 Nominal

24 V

Power

3 W

Subcategory

DC-DC Converter

Datasheet

pdf file

THB3.pdf

221 KiB

Extracted Text

TRACO POWER DC/DC Converters THB3 SERIES 3 Watt High Isolation / Reinforced Insulation DC-DC Converter THB 3 Series, 3 Watt Measures: 1.25 X 0.80 X 0.41” CB Scheme IEC 60950-1 UL 60950-1 UL 60950-1 Features IEC 60601-1 UL 60601-1 ◆ Supplementary and reinforced insulation ◆ I/O isolation 4800 VACrms rated for 1000 Vrms (1410 Vpk) working voltage ◆ Medical safety to ES 60601-1 and IEC/EN 60601-1 3rd edition, 2 x MOOP ◆ Industrial safety to IEC/EN/UL 60950-1 ◆ Isolation test voltage 6000 Vpk ◆ Wide 2:1 input voltage ranges ◆ Extended operating temperature range –40°C to 71°C max. The THB-3 series is a range of high performance, regulated DC/DC converters in ◆ Input filter meets EN55022, class A a DIP-24 plastic package. A reinforced I/O-isolation system and a wide 2:1 input ◆ Continuous short-circuit protection voltage range make this product the best choice for many demanding applications ◆ High reliability like transportation systems, industrial controls, medical equipments, instrumenta- tions, everywhere where high basic-, supplementary- or reinforced insulation is ◆ 3-year product warranty required to meet requested safety standards. A high efficiency allows safe operation in a temperature range of –40°C to +71°C. Other features of this product are over voltage protection and internal EMI-input filter to meet EN 55022, class A without additional components. Full SMD-design with exclusive use of ceramic capacitors ensure a very high reliability and a long product lifetime. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. THB 3-0511 5 VDC 600 mA 70 % THB 3-0512 12 VDC 250 mA 75 % 4.5 – 9 VDC THB 3-0515 24 VDC 125 mA 76 % (5 VDC nominal) THB 3-0522 ±12 VDC ±125 mA 75 % THB 3-0523 ±15 VDC ±100 mA 75 % THB 3-1211 5 VDC 600 mA 74 % THB 3-1212 12 VDC 250 mA 80 % 9 – 18 VDC THB 3-1215 24 VDC 125 mA 81 % (12 VDC nominal) THB 3-1222 ±12 VDC ±125 mA 80 % THB 3-1223 ±15 VDC ±100 mA 80 % THB 3-2411 5 VDC 600 mA 78 % THB 3-2412 12 VDC 250 mA 83 % 18 – 36 VDC THB 3-2415 24 VDC 125 mA 84 % (24 VDC nominal) THB 3-2422 ±12 VDC ±125 mA 83 % THB 3-2423 ±15 VDC ±100 mA 83 % THB 3-4811 5 VDC 600 mA 78 % THB 3-4812 12 VDC 250 mA 83 % 36 – 75 VDC THB 3-4815 24 VDC 125 mA 84 % (48 VDC nominal) THB 3-4822 ±12 VDC ±125 mA 83 % THB 3-4823 ±15 VDC ±100 mA 83 % http://www.tracopower.com Page 1 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THB3-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER THB3 SERIES DC/DC Converters 3 Watt High Isolation / Reinforced Insulation DC-DC Converter THB 3 Series 3 Watt Measures: 1.25 X 0.80 X 0.41” Input Specifications Input current at no load / full load 5 Vin models: 40 mA typ. / 880 mA typ. 12 Vin models: 30 mA typ. / 320 mA typ. 24 Vin models: 20 mA typ. / 155 mA typ. 48 Vin models: 10 mA typ. / 95 mA typ. Start-up voltage / under voltage shut down 5 Vin models: 4.5 VDC / 4.0 VDC 12 Vin models: 9 VDC / 8.5 VDC 24 Vin models: 18 VDC / 17 VDC 48 Vin models: 36 VDC / 34 VDC Recommended external input fuse (slow blow) 5 Vin models: 2.0 A 12 Vin models: 1.0 A 24 Vin models: 0.5 A 48 Vin models: 0.25 A Surge voltage (1 sec. max.) 5 Vin models: 11 VDC max. 12 Vin models: 25 VDC max. 24 Vin models: 50 VDC max. 48 Vin models: 100 VDC max. Reverse voltage protection 0.3 A max. Input filter EN 55022 class A, FCC part 15, class A Output Specifications Voltage set accuracy ±1 % Regulation – Input variation Vin min. to Vin max. 0.5 % max. – Load variation 25 – 100 %: single output models: 1.0 % max.. dual output models: 2.0 % max. balanced load Minimum load 15 % of rated max. output current. (Operation at lower load is safe but major deviations to specifyed data may occur) Ripple and noise (20 MHz Bandwidth) 5 VDC models: 100 mVpk-pk max. other models: 150 mVpk-pk max. Transient response (25% load step change) 150 µs typ. Current limitation >120 % Iout max. Short circuit protection indefinite (automatic recovery) Capacitive load 5 VDC output models: 1000 µF max. other single output models: 470 µF max. dual output models: 220 µF max. (each output) Isolation / Safety Standards Isolation test voltage (end of line flash test 1 sec.) 6000 Vpk I/O isolation voltage – according IEC/EN 60601-1 3000 VACrms, rated for 300 Vrms working (50Hz, 60sec.) voltage, 2 x MOOP – according IEC/EN 60950-1 4800 VACrms, rated for 1000 Vrms (1410 Vpk) working voltage Leakage current 2 µA (at 240VAC, 60Hz) Isolation capacitance – Input/Output 13 pF max.. (at 100KHz, 1V) Isolation resistance – Input/Output >1000 Mohm (at 500VDC) Safety standards IEC 60950-1:2005 (2nd ed.) +A1:2009 and/or EN 60950-1:2006 +A1:2010 +A11:2009 +12:2011, UL 60950-1 (2nd ed.) CSA C22.2 No. 60950-1-03 IEC 60601-1 3rd edition, 2 x MOOP, EN 60601-1 + A11:2011 ES 60601-1, CSA C22.2 No. 601.1 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THB3-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER THB3 SERIES DC/DC Converters 3 Watt High Isolation / Reinforced Insulation DC-DC Converter THB 3 Series 3 Watt Measures: 1.25 X 0.80 X 0.41” General Specifications Safety approvals – CB test certificate according IEC 60950-1 www.tracopower.com/products/thb3-cb60950.pdf – CB test certificate according IEC 60601-1(3rd edition) www.tracopower.com/products/thb3-cb60601.pdf – CSA certificate according UL 60950-1 www.tracopower.com/products/thb3-csa60950.pdf – CSA certificate according UL 60601-1 www.tracopower.com/products/thb3-csa60601.pdf – UL certificate according UL 60950-1 www.ul.com File E188913, copy: e188913qqgq2.pdf Temperature ranges – Operating –40°C to +71°C – Casing +95°C max. – Storage –40°C to +125°C Derating 3.0 %/K above 60°C Humidity (non condensing) 95 % rel H max. Temperature coefficient ±0.02 %/K typ. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >1 Mio. h Switching frequency 150 kHz typ. (puls width modulation) Casing material non conductive plastic (UL 94V-0-rated) Potting material Silicon TSE 3331 (UL 94V-0-rated) Weight 16.2 g (0.57 oz) Soldering temperature max. 265°C / 10 sec. Altitude during operation up to 5‘000 m (16‘400 ft) approved Environmental compliance – Reach www.tracopower.com/products/thb3-reach.pdf – RoHS according RoHS directive 2011/65/EU Application note : www.tracopower.com/products/thb3-application.pdf - The component is not be used in an oxygen rich environment. - The component is not to be used in conjunction with flammable anaesthetics and agents. - The component has to be disposed appropriately. Please refer to local regulations (Waste Electrical and Electronic Equipment). - A modification of the component is not allowed. Outline Dimensions 31.8 (1.25) Pin-Out Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 11 No pin Common 12 –Vout No pin 2.54 20.32 (0.8) 2x2.54 2.0 (0.1) (2x0.1) (0.08) 13 +Vout –Vout 15 No pin +Vout 23 –Vin (GND) –Vin (GND) 24 –Vin (GND) –Vin (GND) 111 12 Dimensions in [mm], () = Inch Bottom view Pin diameter ø 0.6 ±0.05 (0.024 ±0.002) Tolerances ±0.25 (±0.001) 24 23 15 13 Pin pich tolerances ±0.13 (±0.005) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. June 06. 2014 www.tracopower.com Page 3 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THB3-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 15.2 (0.6) 2.54 0.2 (0.008) (0.1) 20.3 (0.8) 3.9 10.5 (0.41) (0.15)

Frequently asked questions

How does Electronics Finder differ from its competitors?

chervon down
Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

Is there a warranty for the THB3-0515?

chervon down
The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

Which carrier will Electronics Finder use to ship my parts?

chervon down
We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Can I buy parts from Electronics Finder if I am outside the USA?

chervon down
Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Which payment methods does Electronics Finder accept?

chervon down
Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

product

5 W, 10.8 -16.5 VDC Vin, Single Output, - 500 VDC@0.01 A DC-DC Converter

product

5 W, 10.8 -16.5 VDC Vin, Single Output, 500 VDC@0.01 A DC-DC Converter

product

5 W, 10.8 -16.5 VDC Vin, Single Output, - 1000 VDC@0.005 A DC-DC Converter

product

5 W, 10.8 -16.5 VDC Vin, Single Output, 1000 VDC@0.005 A DC-DC Converter

product

5 W, 10.8 -16.5 VDC Vin, Single Output, - 2000 VDC@0.0025 A DC-DC Converter

product

5 W, 10.8 -16.5 VDC Vin, Single Output, 2000 VDC@0.0025 A DC-DC Converter