TRACO POWER THD10-2415WIN

TRACO POWER DC/DC Converters THD10-WIN SERIES 10 Watt Wide DC-DC Converter THD 10WIN Series, 10 Watt Measures: 1.25 x 0.80 x 0.40” CB Scheme Features IEC 60950-1 UL 60950-1 ◆ UItra wide 4:1 input voltage range ◆ Internal EMI-filter meets EN 55022, class A without external components ◆ High efficiency up to 87% ◆ Operating temperature range –40°C to +85°C ◆ No minimum load required ◆ I/O isolation 1’500 VDC ◆ Overload protection ◆ 3-year product warranty The THD 10WIN series is designed for an optimized cost/performance ratio of DC/DC converters with output power of 10 Watt. They come with an internal EMI-filter to meet EN55022, class A without external components. General features like no minimum load requirement, overload protec- tion and high efficiency make these converters easy to design in. With the popular DIP-24 standard package they are also a drop in replacement for many cost critical applications. Models Input voltage Output voltage Output current Efficiency typ. Order code range max. THD 10-2410WIN 3.3 VDC 2700 mA 86 % THD 10-2411WIN 5.1 VDC 2000 mA 85 % THD 10-2412WIN 9 – 36 VDC 12 VDC 833 mA 87 % THD 10-2413WIN (24 VDC nominal) 15 VDC 666 mA 87 % THD 10-2415WIN 24 VDC 416 mA 87 % THD 10-2422WIN ±12 VDC ±416 mA 87 % THD 10-2423WIN ±15 VDC ±333 mA 87 % THD 10-4810WIN 3.3 VDC 2700 mA 86 % THD 10-4811WIN 5.1 VDC 2000 mA 85 % THD 10-4812WIN 18 – 75 VDC 12 VDC 833 mA 87 % THD 10-4813WIN (48 VDC nominal) 15 VDC 666 mA 87 % THD 10-4815WIN 24 VDC 416 mA 87 % THD 10-4822WIN ±12 VDC ±416 mA 87 % ±15 VDC ±333 mA 87 % THD 10-4823WIN http://www.tracopower.com Page 1 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THD10-WIN-dc-dc-converter.html http://power.sager.com TRACO POWER THD10-WIN SERIES 10 Watt Wide DC-DC Converter DC/DC Converters Measures: 1.25 x 0.80 x 0.40” THD 10WIN Series 10 Watt Input Specifications Input current at no load 24 Vin models: 30 mA typ. 48 Vin models: 20 mA typ. Recommended input fuse (slow blow) 24 Vin models: 2000 mA 48 Vin models: 1000 mA Start-up voltage / under voltage shut down 24 Vin models: 9 VDC / 8.5 VDC (or lower) 48 Vin models: 18 VDC / 17 VDC (or lower) Surge voltage (1 sec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise EN 55022 class A without external components ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Fast transient / surge EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV perf. criteria A with external capacitor chemi-con KY 220 μF, 100 V Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Output Specifications Voltage set accuracy ±2 % max. Regulation – Input variation Vin min. to Vin max. 1.0 % max. – Load variation 0 – 100 % single output models: 1.2 % max. dual output models balanced load: 2.0 % max. Minimum load not required Temperature coefficient ±0.02 %/K Ripple and noise (20 MHz Bandwidth) 100 mVp-p max. Transient recovery time (25% load step change) 300 μS response time typ. Transient response deviation (25% load step change) ±5 % max. Current limitation 110–150 % of Iout foldback, automatic recovery Short circuit protection hiccup, automatic recovery Over load protection 150 % of Iout max. typ. Capacitive load 3.3 & 5.1 VDC models: 1000 μF max. 12 VDC models: 470 μF max. 15 VDC models: 330 μF max. 24 VDC models: 150 μF max. ±12 VDC models: 220 μF max. (each output) ±15 VDC models: 150 μF max. (each output) General Specifications Temperature ranges – Operating (natural convection 20 LFM) –40°C to +85°C – Case temperature +100°C max. – Storage –50°C to +125°C Derating 3.3 %/K above +70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) 1‘000‘000 h Isolation voltage (input/output 60 sec., rated) 1’500 VDC Isolation capacitance (input/output, 100 KHz, 1 V) 1‘000 pF typ. Isolation resistance (input/output, 500 VDC) >1‘000 M Ohm All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THD10-WIN-dc-dc-converter.html http://power.sager.com TRACO POWER THD10-WIN SERIES 10 Watt Wide DC-DC Converter DC/DC Converters Measures: 1.25 x 0.80 x 0.40” THD 10WIN Series 10 Watt General Specifications Remote On/Off – On: 3.5 ... 12 VDC or open circuit – Off: 0 ... +1.2 VDC or short circuit pin 1 and pin 2 – Off idle current: 10 mA max. Switching frequency 330 kHz typ. Safety standards UL/cUL 60950-1, IEC/EN 60950-1 Safety approvals – CSA certificate of compliance CAN/CSA-C22.2 No 60950-1-07, Am 1:2011 ANSI/UL Std No 60950-1, 2nd Ed, AM 1:2011 – CB test certificate IEC 60950-1:2005 2nd Ed, Am 1:2009 – Certification documents www.tracopower.com/overview/thd10win Environmental compliance – Reach www.tracopower.com/overview/thd10win – RoHS RoHS directive 2011/65/EU Physical Specifications Casing metal with non conductive baseplate Pin copper alloy with gold plated nickel subplate Weight 17.3 g (0.61 oz) Soldering temperature (1.5mm from case for 10 sec.) max. 260°C Application note: www.tracopower.com/products/thd10win-application.pdf Outline Dimensions 1 23 911 Pin-Out Pin Single Dual Bottom view 1 Remote On/Off Remote On/Off 23 22 16 14 2 –Vin (GND) –Vin (GND) 3 –Vin (GND –Vin (GND 15.24(0.60) 4.5 9 No pin Common (0.10) (0.20) (0.18) 31.8 (1.25) 11 No function –Vout 14 +Vout +Vout 16 –Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) 4.5 (0.18) Dimensions in [mm], () = Inch 2.54 15.24 (0.60) 5.08 Pin diameter ø 0.5 ±0.05 (0.02 ±0.002) (0.10) (0.20) Tolerances ±0.5 (±0.02) Pin pitch tolerances ±0.25 (±0.01) Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Click below for more details, to buy on-line or request volume pricing: Rev. March 23. 2015 (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THD10-WIN-dc-dc-converter.html www.tracopower.com Page 3 of 3 http://power.sager.com 2.54 5.08 pending 4.1 10.2 (0.40) 2.54 15.22 (0.60) (0.16) (0.10) 20.3 (0.80)