TRACO POWER THD10-4823N

TRACO POWER DC/DC Converters THD10N SERIES 10 Watt DC/DC Converter THD 10N Series, 10 Watt Measures: 1.25 x 0.80 x 0.40” Features UL 60950-1 ◆ Wide 2:1 input voltage range ◆ Internal EMI-filter meets EN 55022, class A without external components ◆ High efficiency up to 87% ◆ Operating temperature range –40°C to +85°C ◆ No minimum load required ◆ I/O isolation 1’500 VDC ◆ Overload protection ◆ 3-year product warranty The THD 10N series is designed for an optimized cost/performance ratio of DC/DC converters with output power of 10 Watt. They come with an internal EMI-filter to meet EN55022, class A without external components. General features like no minimum load requirement, overload protec- tion and high efficiency make these converters easy to design in. With the popular DIP-24 standard package they are also a drop in replacement for many cost critical applications. Models Input voltage Output voltage Output current Efficiency typ. Order code range max. THD 10-1210N 3.3 VDC 2700 mA 86 % THD 10-1211N 5.1 VDC 2000 mA 85 % THD 10-1212N 9 – 18 VDC 12 VDC 833 mA 88 % THD 10-1213N (12 VDC nominal) 15 VDC 666 mA 89 % THD 10-1222N ±12 VDC ±416 mA 88 % THD 10-1223N ±15 VDC ±333 mA 89 % THD 10-2410N 3.3 VDC 2700 mA 86 % THD 10-2411N 5.1 VDC 2000 mA 85 % THD 10-2412N 18 – 36 VDC 12 VDC 833 mA 89 % (24 VDC nominal) 15 VDC 666 mA 89 % THD 10-2413N THD 10-2422N ±12 VDC ±416 mA 88 % THD 10-2423N ±15 VDC ±333 mA 89 % THD 10-4810N 3.3 VDC 2700 mA 86 % THD 10-4811N 5.1 VDC 2000 mA 85 % THD 10-4812N 36 – 75 VDC 12 VDC 833 mA 87 % THD 10-4813N (48 VDC nominal) 15 VDC 666 mA 88 % THD 10-4822N ±12 VDC ±416 mA 87 % THD 10-4823N ±15 VDC ±333 mA 88 % Specifications are subject to change without notice. It is r http://www.tracopower.c esponsibility of each customer to thor om oughly test each product and part number under their unique parameters and environments to ensure a product will work pr Page 1 o operly and r f 3 eliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-thd10n-dc-dc-converter.html http://power.sager.com pending TRACO POWER THD10N SERIES DC/DC Conv 10 W er att DC/DC Converter ters THD 10N Series Measures: 1.25 x 0.80 x 0.40” 10 Watt Input Specifications Input current at no load 12 Vin models: 20 mA typ. 24 Vin models: 15 mA typ. 48 Vin models: 10 mA typ. Start-up voltage / under voltage shut down 12 Vin models: 9 VDC / 8.5 VDC (or lower) 24 Vin models: 18 VDC / 17 VDC (or lower) 48 Vin models: 36 VDC / 34 VDC (or lower) Surge voltage (1 sec. max.) 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise EN 55022 class A without external components ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Fast transient / surge EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV perf. criteria A with external capacitor chemi-con KY 220 μF, 100 V Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Output Specifications Voltage set accuracy ±2 % max. Regulation – Input variation Vin min. to Vin max. 1.0 % max. – Load variation 0 – 100 % single output models: 1.2 % max. dual output models balanced load: 2.0 % max. Minimum load not required Temperature coefficient ±0.02 %/K Ripple and noise (20 MHz Bandwidth) 100 mVp-p typ. Transient recovery time (25% load step change) 300 μs response time typ. Transient response deviation (25% load step change) ±5 % max. Short circuit protection hiccup, automatic recovery Over load protection 150 % of Iout max. typ. Capacitive load 3.3 & 5.1 VDC models: 1000 μF max. 12 VDC models: 470 μF max. 15 VDC models: 330 μF max. ±12 VDC models: 220 μF max. (each output) ±15 VDC models: 150 μF max. (each output) General Specifications Temperature ranges – Operating (natural convection 20 LFM) –40°C to +85°C – Case temperature +105°C max. – Storage –50°C to +125°C Derating 2.9 %/K above +70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) > 1 Mio h Isolation voltage (input/output 60 sec., rated) 1’500 VDC Isolation capacitance (input/output, 100 KHz, 1 V) 1‘500 pF max. Isolation resistance (input/output, 500 VDC) >1‘000 M Ohm Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-thd10n-dc-dc-converter.html http://www.tracopower.com http://Ppow age 2 o er.saf 3 ger.com TRACO POWER THD10N SERIES DC/DC Converters 10 Watt DC/DC Converter THD 10N Series 10 Watt Measures: 1.25 x 0.80 x 0.40” General Specifications Remote On/Off – On: 3.5 ... 12 VDC or open circuit – Off: 0 ... +1.2 VDC or short circuit pin 1 and pin 2 – Off idle current: 10 mA max. Switching frequency 330 kHz typ. Safety standards UL/cUL 60950-1, IEC/EN 60950-1 Safety approvals – CSA certificate according UL 60950-1 www.tracopower.com/products/thd10n-csa.pdf Environmental compliance – Reach www.tracopower.com/overview/thd10n – RoHS RoHS directive 2011/65/EU Physical Specifications Casing metal with non conductive baseplate Pin copper alloy with gold plated nickel subplate Weight 17.3 g (0.61 oz) Soldering temperature (1.5mm from case for 10 sec.) max. 260°C Application note: www.tracopower.com/products/thd10n-application.pdf Outline Dimensions Pin-Out 1 23 911 Pin Single Dual Bottom view 1 Remote On/Off Remote On/Off 23 22 16 14 2 –Vin (GND) –Vin (GND) 3 –Vin (GND –Vin (GND 15.24(0.60) 4.5 9 No pin Common (0.10) (0.20) (0.18) 31.8 (1.25) 11 No function –Vout 14 +Vout +Vout 16 –Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) 4.5 (0.18) Dimensions in [mm], () = Inch 2.54 15.24 (0.60) 5.08 Pin diameter ø 0.5 ±0.05 (0.02 ±0.002) (0.10) (0.20) Tolerances ±0.5 (±0.02) Pin pich tolerances ±0.25 (±0.01) Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-thd10n-dc-dc-converter.html http://power.sager.com Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. March 31. 2015 www.tracopower.com Page 3 of 3 2.54 5.08 pending pending 4.1 10.2 (0.40) 2.54 15.22 (0.60) (0.16) (0.10) 20.3 (0.80)