TRACO POWER THD15-4810N

Traco Power DC/DC Converters THD15N SERIES 15 Watt Wide 2:1 Input Range DC-DC Converter THD 15N Series, 15 Watt Measures: 1.25 x 0.80 x 0.40” CB Scheme Features UL 60950-1UL 60950-1 ◆ Highest power density in DIP 24 package ◆ Shielded metal case with isolated baseplate ◆ Very high efficiency up to 91% ◆ Wide 2:1 input ranges ◆ No minimum load required ◆ Input filter meets EN 55022 class A without external components ◆ I/O isolation voltage 1500 VDC ◆ Operating temp. range : –40°C to +85°C The THD-15N series models provide 15 Watt output power out of a very compact ◆ Remote On/Off control shielded metal case that occupies only 1 inch² of board space. The converters work ◆ Industry standard pinout with a high efficiency over the full load range and draw a very low input current at ◆ 3-year product warranty no load conditions. All models have a wide 2:1 input voltage range and a precisely regulated output voltage. Typical applications for these converters are mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and ev- erywhere where space on PCB is critical. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. THD 15-1210N 3.3 VDC 4‘000 mA 87 % THD 15-1211N 5.1 VDC 3‘000 mA 90 % THD 15-1212N 9 – 18 VDC 12 VDC 1‘250 mA 90 % THD 15-1213N (12 VDC nominal) 15 VDC 1’000 mA 90 % THD 15-1221N ±5 VDC ±1’500 mA 86 % THD 15-1222N ±12 VDC ±625 mA 90 % THD 15-1223N ±15 VDC ±500 mA 90 % THD 15-2410N 3.3 VDC 4‘000 mA 88 % THD 15-2411N 5.1 VDC 3‘000 mA 90 % THD 15-2412N 18 – 36 VDC 12 VDC 1‘250 mA 91 % THD 15-2413N (24 VDC nominal) 15 VDC 1’000 mA 91 % THD 15-2421N ±5 VDC ±1’500 mA 87 % THD 15-2422N ±12 VDC ±625 mA 90 % THD 15-2423N ±15 VDC ±500 mA 90 % THD 15-4810N 3.3 VDC 4‘000 mA 88 % THD 15-4811N 5.1 VDC 3‘000 mA 90 % THD 15-4812N 36 – 75 VDC 12 VDC 1‘250 mA 90 % (48 VDC nominal) THD 15-4813N 15 VDC 1’000 mA 91 % THD 15-4821N ±5 VDC ±1’500 mA 87 % THD 15-4822N ±12 VDC ±625 mA 90 % THD 15-4823N ±15 VDC ±500 mA 90 % http://www.tracopower.com Page 1 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THD15N-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om pending Traco Power THD15N SERIES DC/DC Converters 15 Watt Wide 2:1 Input Range DC-DC Converter THD 15N Series 15 Watt Measures: 1.25 x 0.80 x 0.40” Input Specifications Input current at no load (nominal input voltage) 12 Vin models: 8 mA typ. 24 Vin models: 5 mA typ. 48 Vin models: 4 mA typ. Input current at full load (nominal input voltage) 12 Vin models: 1450 mA typ. 24 Vin models: 720 mA typ. 48 Vin models: 360 mA typ. Start-up voltage / 12 Vin models: 9.0 VDC / 8.0 VDC under voltage shut down 24 Vin models: 18 VDC / 16 VDC 48 Vin models: 36 VDC / 33 VDC Surge voltage (1 sec. max.) 12 Vin models: 36 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A (without external components) ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A Radiated immunity EN 61000-4-3 10 V/m, perf. criteriy A Fast transient / Surge EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV perf. criteria A with external input capacitor e.g. Nippon chemi-con KY 220 µF, 100 V, ESR 48 mOhm Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Reflected ripple current 20 mAp-p typ. Output Specifications Voltage set accuracy ±1 % max Regulation – Input variation single output models: 0.2 % max. (Vin min to Vin max.) dual output models: 0.5 % max. (Vin min to Vin max.) – Load variation 0 – 100% single output models: 0.5 % max. dual output models: 1.0 % max. balanced load – Load variation 10 – 90% single output models: 0.3 % max. dual output models: 0.8 % max. balanced load – Load cross regulation 25/100% 5.0 % max. (dual output models) Minimum load 0 % of rated max. load Temperature coefficient ±0.02 %/K Ripple and noise (20 MHz bandwidth) 60 mVp-p typ. Output current limitation at 150 % of Iout max. foldback Short circuit protection indefinite, automatic recovery Over voltage protection (single output models only) 3.3 VDC models: 3.9 VDC 5.1 VDC models: 6.2 VDC 12 VDC models: 15 VDC 15 VDC models: 18 VDC Start up time (nominal Vin and constant resistive load) 30 ms typ. (for power on and remote on) Transient response setting time (25% load step change) 250 µs typ. Capacitive load 3.3 VDC models: 4700 µF max. 5.1 VDC models: 3300 µF max. 12 VDC models: 600 µF max. 15 VDC models: 400 µF max. ±5 VDC models: ±1500 µF max. ±12 VDC models: ±288 µF max. ±15 VDC models: ±200 µF max. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THD15N-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Traco Power THD15N SERIES DC/DC Converters 15 Watt Wide 2:1 Input Range DC-DC Converter THD 15N Series 15 Watt Measures: 1.25 x 0.80 x 0.40” General Specifications Temperature ranges – Operating –40°C to +85°C (with derating) – Case temperature +105°C max. – Storage –55°C to +105°C Power derating 4 %/K above +70°C Thermal inpedance – Natural convection 20°C/W Humidity (non condensing) 5 % to 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >1.8 Mio h Isolation voltage (60sec) – Input/Output 1’500 VDC Isolation capacitance – Input/Output 2000 pF typ. Isolation resistance – Input/Output (500 VDC) >1’000 MOhm Remote On/Off – On: 3.0 ... 12 VDC or open circuit – Off: 0 ... 1.2 VDC or short circuit pin 1 and pin 2 – Off idle current: 2.5 mA Switching frequency 330 kHz typ. (pulse width modulation PWM) Thermal shock, mechanical shock & vibration EN 61373, MIL-STD-810F – Test conditions www.tracopower.com/products/mil810.pdf Safety standards UL/cUL 60950-1, EN 60950-1, IEC 60950-1 Safety approvals – UL/cUL www.ul.com -> certifications -> File e188913 Environmental compliance – Reach www.tracopower.com/products/thd15n-reach.pdf – RoHS RoHS directive 2011/65/EU Application note: www.tracopower.com/products/thd15n-application.pdf Physical Specifications Casing material nickel coated copper Baseplate non conductive FR4 Potting material silicone (UL 94V-0 rated) Weight 14.4 g (0.51oz) Soldering temperature max. 265°C / 10sec. Outline Dimensions Pin-Out Pin Single Dual 1 Remote On/Off Remote On/Off 1 23 2 2 –Vin (GND) –Vin (GND) 3 22 3 –Vin (GND) –Vin (GND) 9 NC Common 11 NC. –Vout 14 +Vout +Vout 16 9 16 –Vout Common 11 14 22 +Vin (Vcc) +Vin (Vcc) +Vin (Vcc) +Vin (Vcc) 23 15.24 (0.60) 2.5 Insulated Baseplate (0.10) Dimensions in [mm], () = Inch 3.8 10.2 20.3 (0.80) Pin diameter ø 0.5 (0.02) (0.15) (0.40) Pin pitch tolerances: ±0.35 (±0.014) Tolerances: ±0.5 (±0.02) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. July 18. 2014 www.tracopower.com Page 3 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THD15N-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om pending 31.8 (1.25) 25.4 (1.0) 2.0 (0.08) 5.08 15.24 (0.60) 2.54 (0.10) (0.20) Bottom view