TRACO POWER THI2-2413M

TRACO POWER DC/DC Converters THI2M SERIES 2 Watt High Isolation / Reinforced Insulation DC-DC Converter THI 2M Series, 2 Watt Measures: 0.94 x 0.54 x 0.34” CB Scheme Features IEC 60950-1 UL 60950-1 IEC 60601-1 UL 60601-1 ◆ Ultracompact DIP 16 package ◆ I/O isolation 3000 VACrms rated for 300 Vrms working voltage ◆ Medical safety to UL 60601-1 and IEC/EN 60601-1 3rd edition, 2 x MOOP ◆ Industrial safety to IEC/EN/UL 60950-1 ◆ Operating temp. range –40°C to +71°C ◆ 3-years product warranty The THI 2M series is a new range of ultra-compact 2W DC/DC-converters providing a high I/O-isolation voltage of 3000 VAC. With a reinforced I/O-isolation system this product is an economical solution for many applications in instrumentation, industrial controls, medical equipment and everywhere where supplementary- or reinforced insulation is required to meet requested safety standards. Full SMD-design with exclusive use of ceramic capacitors ensure a very high reli- ability and a long product lifetime. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. THI 2-0511M 5 VDC 400 mA 66 % THI 2-0512M 12 VDC 165 mA 66 % 5.0 VDC ± 10% THI 2-0513M 15 VDC 133 mA 66 % (nominal 5 VDC) THI 2-0522M ±12 VDC ±83 mA 72 % THI 2-0523M ±15 VDC ±66 mA 73 % THI 2-1211M 5 VDC 400 mA 66 % THI 2-1212M 12.0 VDC ± 10% 12 VDC 165 mA 66 % THI 2-1213M (nominal 12 VDC) 15 VDC 133 mA 66 % THI 2-1222M ±12 VDC ±83 mA 74 % THI 2-1223M ±15 VDC ±66 mA 75 % THI 2-2411M 5 VDC 400 mA 66 % THI 2-2412M 24 VDC ± 10% 12 VDC 165 mA 66 % THI 2-2413M (nominal 24 VDC) 15 VDC 133 mA 66 % THI 2-2422M ±12 VDC ±83 mA 74 % THI 2-2423M ±15 VDC ±66 mA 75 % Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 1 of 3 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THI2M-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER THI2M SERIES 2 Watt High Isolation / Reinforced Insulation DC-DC Converter DC/DC Converters Measures: 0.94 x 0.54 x 0.34” THI 2M Series 2 Watt Input Specifications Input current no load / full load 5 Vin models: 60 mA / 600 mA typ. 12 Vin models: 30 mA / 250 mA typ. 24 Vin models: 15 mA / 135 mA typ. Reverse voltage protection 0.3 A max. Recommended external input fuse (slow blow) 5 Vin models: 1.0 A 12 Vin models: 0.5 A 24 Vin models: 0.2 A Surge voltage (1 sec. max.) 5 Vin models: 9 V max. 12 Vin models: 18 V max. 24 Vin models: 30 V max. Input filter internal capacitors Output Specifications Voltage set accuracy ±4 % Voltage balance (dual output models) 1 % max. Regulation – Input variation 1.2 % / 1 % change of Vin – Load variation 20 – 100 % 10 % max. 12 % max. for 5 Vout models. Ripple and noise (20 MHz Bandwidth) 150 mVpk-pk max Temperature coefficient ±0.02 %/K Short circuit protection 0.5 sec. max. Minimum load 2 % of rated max. current Capacitive load single output models: 330 µF max. dual output models: 100 µF max. (each output) General Specifications Temperature ranges – Operating –40°C to +71°C – Storage –40°C to +125°C – Case temperature +90°C max. Thermal impedance 22.5 K/W Derating 2.5 %/K above 60°C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217F, at 25°C, ground benign) >2.0 Mio h Isolation voltage – Input/Output Reinforced, rated for 300 Vrms working voltage (50Hz, 60sec) Medical applications in accordance to IEC/EN 60601-1: 3000 VAC, 2 x MOOP IT applications in accordance to IEC/EN 60950-1: 4000 VAC Isolation test voltage (1 sec.) 6‘000 Vpk Leakage current (at 240VAC, 60Hz) 2 µA max. Isolation capacitance – Input/Output 20 pF max. (at 100KHz, 1V) Isolation resistance – Input/Output >10 Gohm (at 500VDC) Switching frequency 50 – 100 kHz (PFM) Safety standards IEC/EN 60950-1, UL 60950-1 CSA C22.2 No. 60950-1-03 IEC/EN 60601-1 3rd edition, 2 x MOOP, UL 60601-1, CSA C22.2 No. 601.1 Safety approvals – CSA certificate for medical electrical equipment www.tracopower.com/products/thi2m-csa60601.pdf for information technology equipment www.tracopower.com/products/thi2m-csa60950.pdf – CB test certificate for medical electrical equipment www.tracopower.com/products/thi2m-cb60601.pdf for information technology equipment www.tracopower.com/products/thi2m-cb60950.pdf All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. h httttp p::/ // /w ww ww w..ttrrac acop opo ow weerr..ccom om Page 2 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THI2M-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER THI2M SERIES 2 Watt High Isolation / Reinforced Insulation DC-DC Converter DC/DC Converters Measures: 0.94 x 0.54 x 0.34” THI 2M Series 2 Watt General Specifications Casing material non conductive plastic (UL 94V-0 rated) Weight 5.1 g (0.18oz) Soldering temperature max. 265°C / 10 sec Application note: www.tracopower.com/products/thi2m-application.pdf - The component is not be used in an oxygen rich environment. - The component is not to be used in conjunction with flammable anaesthetics and agents. - The component has to be disposed appropriately. Please refer to local regulations (Waste Electrical and Electronic Equipment). - A modification of the component is not allowed. Outline Dimensions Pin-Out 16 1 Pin Single Dual 1 –Vin (GND) –Vin (GND) 7 No con. No con. 8 No con. Common 9 +Vout +Vout 10 –Vout –Vout 10 7 16 +Vin +Vin 9 8 0.5 (0.02) 1.77 10.16 (0.07) 3.2 8.6 (0.34) 13.7 (0.54) (0.13) Dimensions in [mm], () = Inch Pin diameter: 0.5 ±0.05 (0.024 ±0.002) Tolerances: ±0.25 (±0.01) Pin pitch tolerances: ±0.05 (±0.002) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Rev. March 14. 2014 www.tracopower.com Page 3 of 3 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THI2M-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 3.0 (0.12) 2.54 15.24 (0.60) (0.10) 23.8 (0.94) bottom view