TRACO POWER THI3-0522

TRACO POWER THI3 SERIES DC/DC Converters 3 Watt High Isolation / Reinforced Insulation DC-DC Converter THI 3 Series, 3 Watt Measures: 1.25 x 0.80 x 0.41” CB Scheme Features ES 60601-1 IEC 60950-1 IEC 60601-1 ◆ Supplementary and reinforced insulation ◆ I/O isolation 4000 VACrms rated for 300 VACrms working voltage ◆ 2 x MOOP medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition ◆ Industrial safety to IEC/EN 60950-1 ◆ Fully regulated output voltage ◆ Input filter meets EN 55022, class A and FCC, level A ◆ Operating temp. range –40°C to +75°C ◆ Low leakage current ◆ Low coupling capacitance The THI 3 series is a new range of high isolation DC/DC converters with a reinforced insulation system. The I/O- isolation voltage is specified for ◆ Short circuit protection 4000VACrms. The circuit is encapsulated in a DIP-24 package. ◆ 3-years product warranty There are 15 models available for 5, 12 and 24VDC input voltage and single or dual output voltage. The THI-3 DC/DC converters offer a cost effective solution for applications in industrial controls and medical instrumentation requiring a certified supplementary or reinforced insulation system to comply with industrial or latest medical safety standards. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. THI 3-0511 5 VDC 600 mA 60 % THI 3-0512 12 VDC 250 mA 62 % THI 3-0513 5.0 VDC ± 10% 15 VDC 200 mA 62 % THI 3-0522 ±12 VDC ±125 mA 60 % THI 3-0523 ±15 VDC ±100mA 60 % THI 3-1211 5 VDC 600 mA 60 % THI 3-1212 12 VDC 250 mA 62 % THI 3-1213 12.0 VDC ± 10% 15 VDC 200 mA 62 % THI 3-1222 ±12 VDC ±125 mA 60 % THI 3-1223 ±15 VDC ±100 mA 60 % 5 VDC 600 mA 60 % THI 3-2411 THI 3-2412 12 VDC 250 mA 64 % THI 3-2413 24 VDC ± 10% 15 VDC 200 mA 64 % THI 3-2422 ±12 VDC ±125 mA 60 % THI 3-2423 ±15 VDC ±100 mA 60 % Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: http://www.tracopower.com Page 1 of 3 (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THI3-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER THI3 SERIES 3 Watt High Isolation / Reinforced Insulation DC-DC Converter DC/DC Converters Measures: 1.25 x 0.80 x 0.41” THI 3 Series 3 Watt Input Specifications Input current no load / full load 5 Vin models: 130 mA / 1000 mA typ. 12 Vin models: 60 mA / 420 mA typ. 24 Vin models: 40 mA / 210 mA typ. Surge voltage (1 sec. max.) 5 Vin models: 7.5 V max. 12 Vin models: 15 V max. 24 Vin models: 30 V max. Recommanded input fuse (slow blow) 5 Vin models: 2 A 12 Vin models: 1 A 24 Vin models: 0.5 A Input filter Pi-Filter Conducted noise EN 55022, class A and FCC level A Output Specifications Voltage set accuracy ±4 % Voltage balance (dual output models) 4 % max. Regulation – Input variation 0.5 % – Load variation 10–100% 1.0 % max. Min. load no minimum load required Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max. Temperature coefficient ±0.02 %/K Short circuit protection continuous (automatic recovery) Capacitive load single output models: 470 µF max. dual output models: 220 µF max. (each output) Isolation / Safety Standards I/O isolation voltage – to meet ES/IEC/EN 60601-1 4000 VACrms, rated for 300 Vrms working (50Hz, 60sec.) voltage, 2 x MOOP Isolation capacitance – Input/Output 20 pF typ. Isolation resistance – Input/Output >10 Gohm (at 500 VDC) Pri-Sec leakage current (at 240VAC, 60Hz) 2 µA Safety standards IEC/EN 60950-1, IEC/EN 60601-1 3rd Edition, ANSI/AAMI ES60601-1 and CAN/CSA-C22.2 No. 60601-1, Medical Electrical Equipment - Part 1: General Requirements for Basic Safety and Essential Performance Safety approvals – CB test certificate according IEC 60950-1 www.tracopower.com/products/thi3-cb60950.pdf – CB test certificate according IEC 60601-1 www.tracopower.com/products/thi3-cb60601.pdf – UL online certification to ES 60601-1 www.ul.com/database File: e188913 - QQHM2 General Specifications Temperature ranges – Operating –40°C to +75°C – Case temperature +95°C max. – Storage –50°C to +125°C Derating 2.78 %/K above 60°C Humidity (non condensing) 95 % rel. H max. Altitude during operation 4000 m Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >1 Mio h Switching frequency 25 – 60 kHz (PFM) All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Specifications are subject to change without notice. It is r http://www.tracopoesponsibility of each customer to thor wer.com oughly test each product and part number under their unique parameters and environments to ensure a product will work pr Page 2 o operly and r f 3 eliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THI3-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER THI3 SERIES 3 Watt High Isolation / Reinforced Insulation DC-DC Converter DC/DC Converters Measures: 1.25 x 0.80 x 0.41” THI 3 Series 3 Watt General Specifications Environmental compliance – Reach www.tracopower.com/products/thi3-reach.pdf – RoHS RoHS directive 2011/65/EU Casing material plastic (UL 94V-0 rated) Pin Material Copper Alloy with gold plated Nickel over subplate Weight 12.4 g (0.44 oz) Soldering temperature max. 260°C / 10 sec Outline Dimensions Pin-Out Pin Single Dual 24 1 1 +Vin (VCC) +Vin (VCC) 23 2 2 +Vin (VCC) +Vin (VCC) 10 No pin Common 11 No pin Common 12 –Vout No pin. 15 10 11 13 +Vout –Vout 13 12 15 No pin +Vout 2.54 15.22 23 –Vin (GND) –Vin (GND) (0.6) (0.1) 3.8 10.5 20.3 24 –Vin (GND) –Vin (GND) (0.15) (0.41) (0.8) Dimensions in [mm], () = Inch Tolerances: ±0.25 (±0.01) Pin diameter: Ø 0.5 ±0.05 (0.02 ±0.002) Pin pitch tolerances: ±0.13 (±0.005) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. February 14. 2014 www.tracopower.com Page 3 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THI3-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 31.8 (1.25) 27.94 2.0 (1.1) (0.08) 2.54 2.54 20.32 2.54 (0.1) (0.8) (0.1) (0.1) bottom view