TRACO POWER THL10-4822WI

TRACO POWER DC/DC Converters THL10-WI SERIES 10 Watt Ultra-Wide 4:1 Input Range DC-DC Converter THL 10WI Series, 10 Watt Measures: 1.00 x 1.00 x 0.40” Features CB Scheme ◆ 10 Watt in 1” x 1” package UL 60950-1UL 60950-1 226037 ◆ Shielded metal case with isolated baseplate ◆ Ultrawide 4:1 input voltage ranges ◆ Remote On/Off control ◆ Operating temp. range –40°C to +75°C and up to +85°C with heat-sink ◆ I/O isolation voltage 1500 VDC ◆ Input filter meets EN 55022 class A without external components ◆ Cost optimized design ◆ Industry standard pinout ◆ 3-year product warranty The THL 10WI is a series of general purpose 10 Watt dc/dc-converters packed in the compact 1” x 1” case and is a pin to pin replacement for the popular 1” x 2” size products. The industrial standard pinout, the ultra wide 4:1 input voltage range and the input filter that meets EN 55022 Class A without external components make these converters easy to design in and suitable for to cost optimize many existing and new applications. The models have a remote On/Off control, short circuit and overvoltage protection and are applicable in temperature ranges of up to +75°C or +85°C with optional mounted heat sink. Typical applications are instrumentation, distributed power ar- chitectures in communication and industrial electronics. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. THL 10-2410WI 3.3 VDC 2200 mA 86 % THL 10-2411WI 5.1 VDC 2000 mA 84 % THL 10-2412WI 12 VDC 830 mA 86 % THL 10-2413WI 9 – 36 VDC 15 VDC 660 mA 87 % THL 10-2415WI (24 VDC nominal) 24 VDC 410 mA 86 % THL 10-2421WI ±5.0 VDC ±1000 mA 84 % THL 10-2422WI ±12 VDC ±410 mA 86 % THL 10-2423WI ±15 VDC ±330 mA 87 % THL 10-4810WI 3.3 VDC 2200 mA 85 % THL 10-4811WI 5.1 VDC 2000 mA 84 % THL 10-4812WI 12 VDC 830 mA 86 % THL 10-4813WI 18 – 75 VDC 15 VDC 660 mA 87 % THL 10-4815WI (48 VDC nominal) 24 VDC 410 mA 86 % THL 10-4821WI ±5.0 VDC ±1000 mA 84 % THL 10-4822WI ±12 VDC ±410 mA 86 % THL 10-4823WI ±15 VDC ±330 mA 87 % http://www.tracopower.com Page 1 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THL10-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om pending TRACO POWER THL10-WI SERIES 10 Watt Ultra-Wide 4:1 Input Range DC-DC Converter DC/DC Converters Measures: 1.00 x 1.00 x 0.40” THL 10WI Series 10 Watt Input Specifications Input current at no load (at nominal input voltage) 24 V models: 30 mA typ. 48 V models: 20 mA typ. Input current at full load (at nominal input voltage) 24 V; 3.3 VDC models: 400 mA typ. 24 V; other models: 500 mA typ.. 48 V; 3.3 VDC models: 200 mA typ. 48 V; other models: 250 mA typ. Start-up voltage / under voltage lockout 24 V models: 9 VDC / 8.5 VDC (or lower) (hysteresis for assertive on) 48 V models: 18 VDC / 17 VDC (or lower) (long term operation at undervoltage will demage the converter!) Surge voltage (1 sec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 class A, FCC part 15, level A without external components Recommended input fuse (slow blow) 24 V models: 2000 mA 48 V models: 1000 mA Output Specifications Voltage set accuracy ±2 % Regulation – Input variation (Vmin – Vmax) 1.0 % max. – Load variation single output models: 1.2 % max. (15 – 100 % load) dual output models: 2.0 % max. (15 – 100 % balanced load) Minimum load 15 % Ripple and noise (20 MHz bandwidth) 60 mVp-p typ. Temperature coefficient ±0.02 %/K Output current limitation >110 % of Iout max. Short circuit protection indefinite, automatic recovery Transient response setting time 300 µs typ. (25 % load step change) Maximum capacitive load 3.3 VDC models: 560 µF 5 VDC models: 560 µF 12 VDC models: 150 µF 15 VDC models: 150 µF 24 VDC models: 68 µF ±5.0 VDC models: 220 µF (each output) ±12 VDC models: 100 µF (each output) ±15 VDC models: 100 µF (each output) Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 2 of 4 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THL10-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER THL10-WI SERIES 10 Watt Ultra-Wide 4:1 Input Range DC-DC Converter DC/DC Converters THL 10WI Serie Measures: 1.00 x 1.00 x 0.40” s 10 Watt General Specifications Temperature ranges – Operating without heat sink –40°C to +75°C (with derating) – Operating with heat sink –40°C to +85°C (with derating) – Case temperature +100°C max. – Storage –40°C to +125°C Power derating – Operating without heat sink 2.5 %/K above +60°C – Operating with heat sink 3.5 %/K above +70°C Thermal inpedance – Natural convection 18.2°C/W – Natural convection with heat sink 15.8°C/W Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >350’000 h Isolation voltage (60 sec.) – Input/Output 1’500 VDC Isolation capacitance – Input/Output 1200 pF max. Isolation resistance – Input/Output (500 VDC) >1’000 MOhm Remote On/Off – On: 2.5 ... 50 VDC or open circuit – Off: 0 ... +1.0 VDC or short circuit pin 6 and pin 2 – Off idle current: 10 mA max. Switching frequency (fixed) 400 kHz typ. (pulse width modulation PWM) Altitude during operation 5‘000 m max. (16‘400 ft) approved Safety standards UL/cUL 60950-1, IEC/EN 60950-1 Safety approvals – UL/cUL www.ul.com -> File no. e188913 (entry pending) – CB test certificate according IEC 60950-1 www.tracopower.com/products/thl10wi-cb.pdf – CSA certificate for UL/cUL 60950-1 www.tracopower.com/products/thl10wi-csa.pdf Environmental compliance – Reach www.tracopower.com/products/thl10wi-reach.pdf – RoHS RoHS directive 2011/65/EU Physical Specifications Casing material metal Baseplate non conductive FR4 Potting material epoxy (UL 94V-0 rated) Weight 15 g (0.53oz) Soldering temperature max. +260°C / 10sec. Application note : www.tracopower.com/products/thl10wi-application.pdf All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THL10-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER THL10-WI SERIES 10 Watt Ultra-Wide 4:1 Input Range DC-DC Converter DC/DC Converters Measures: 1.00 x 1.00 x 0.40” THL 10WI Series 10 Watt Outline Dimensions 7.62 5.08 Pin-Out (0.2) (0.3) Pin Single Dual 2 1 6 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) Bottom view 3 + Vout + Vout 4 3 5 4 No pin Common 5 –Vout –Vout 6.0 10.2 2.5 10.16 10.16 (0.1) (0.4) (0.4) 6 Remote On/Off (0.24) (0.4) 25.4 (1.0) Dimensions in [mm], () = Inch Pin diameter ø 1.0 (0.04) Pin pitch tolerances: ±0.25 (±0.01) Tolerances: ±0.5 (±0.02) Heat-Sink (Option) Order code: THL-HS1 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 4.0 g (0.14oz) without converter Thermal impedance after assembling: 15.8 K/W 31.0 (1.22) max. Note: Heat-sink Thermal pad The product label on converter has to be re- Clamp moved before mounting the heat-sink. Converter For volume orders converters will be sup- plied with heat-sink already mounted. Please contact factory for quotation. 17.5 (0.69) Separate heat-sinks are only available for max. prototypes and small quantity orders. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. December 12. 2014 www.tracopower.com Page 4 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THL10-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 20.32 (0.8) 2.5 (0.1) 25.4 (1.0) 16.3 (0.64)