TRACO POWER THL25-4822WI

TRACO POWER DC/DC Converters THL25-WI SERIES 25 Watt DC-DC Converter THL 25WI Series, 25 Watt Measures: 1.00 x 1.00 x 0.40” Features CB Scheme ◆ Highest power density 25W converter! UL 60950-1 IEC 60950-1 Ultra compact design: 1.0” x 1.0” x 0.4” ◆ Shielded metal case with isolated baseplate ◆ Ultra wide 4 : 1 input voltage ranges ◆ Very high efficiency up to 90% ◆ Output voltage adjustable ◆ Remote On/Off control ◆ Operating temp. range –40°C to +80°C and up to +85°C with heat-sink ◆ I/O isolation voltage 1500 VDC ◆ 3-year product warranty The THL 25WI series is the latest generation of dc-dc converter modules with highest power density. The product achieves 25 Watt output power and comes in a metal case with small dimensions of only 1.0”x 1.0”x 0.4”. All models have a wide 4:1 input voltage range and precisely regulated output volt- ages. High efficiency of up to 90% makes this product very reliable and applicable in temperature ranges of up to +80°C or up to +85°C with optional mounted heat sink. Typical applications are in mobile equipments, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. THL 25-2410WI 3.3 VDC 6000 mA 87 % THL 25-2411WI 5.0 VDC 5000 mA 89 % THL 25-2412WI 12 VDC 2090 mA 89 % 9 – 36 VDC THL 25-2413WI 15 VDC 1670 mA 90 % (24 VDC nominal) THL 25-2422WI ±12 VDC ±1040 mA 89 % THL 25-2423WI ±15 VDC ±840 mA 89 % THL 25-4810WI 3.3 VDC 6000 mA 88 % THL 25-4811WI 5.0 VDC 5000 mA 90 % THL 25-4812WI 12 VDC 2090 mA 90 % 18 – 75 VDC THL 25-4813WI 15 VDC 1670 mA 90 % (48 VDC nominal) THL 25-4822WI ±12 VDC ±1040 mA 89 % THL 25-4823WI ±15 VDC ±840 mA 89 % Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 1 of 4 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THL25-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER THL25-WI SERIES 25 Watt DC-DC Converter DC/DC Converters Measures: 1.00 x 1.00 x 0.40” THL 25WI Series 25 Watt Input Specifications Input current at no load (at nominal input voltage) 24 Vin models: 85 mA typ. 48 Vin models: 45 mA typ. Recommended input fuse (slow blow) 24 Vin models: 2500 mA 48 Vin models: 1250 mA Start-up voltage 24 Vin models: 9 VDC (or lower) 48 Vin models: 18 VDC (or lower) Surge voltage (0.1 sec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Reflected input ripple current 24 Vin models: 50 mAp-p typ. 48 Vin models: 30 mAp-p typ. Conducted noise (input) EN 55022 class A with external L/C EN 55022 class B with external filter see application note ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Fast transient / surge (with external input capacitor) EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV perf. criteria A external input capacitor: Nippon chemi-con KY 220 µF, 100 V, ESR 48 mOhm Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Output Specifications Voltage set accuracy ±1 % Output voltage adj. range ±10 % for single output models only. Trim up via resistor between Trim and -Vout Trim down via resistor between Trim and +Vout resistor values see application note Regulation – Input variation (Vmin – Vmax) 0.2 % max. – Load variation single output models: 0.2 % max. (0 – 100 % load) dual output models: 1.0 % max. (0 – 100 % balanced load) –Cross regulation dual output models: 5.0 % max. (25 – 100 % asymmetrical load) Minimum load not required Start up time 30 ms Ripple and noise (20 MHz bandwidth) 3.3 & 5.0 VDC models: 100 mVp-p typ. 12 & 15 VDC models: 150 mVp-p typ. Temperature coefficient ±0.02 %/K Output current limitation at 150 % of Iout max., hiccup Short circuit protection indefinite, hiccup automatic recovery Over voltage protection shutdown at +20% of nominal output Transient recovery time 250 µs typ. (25% load step change) Transient response deviation ± 5% max. (25% load step change) Max. capacitive load 3.3 VDC models: 10’300 µF 5 VDC models: 6’800 µF 12 VDC models: 1’200 µF 15 VDC models: 750 µF ±12 VDC models: 680 µF (each output) ±15 VDC models: 380 µF (each output) Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 http://www.tracopower.com Page 2 of 4 power@sager .com http://power.sager.com/traco-power-THL25-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER THL25-WI SERIES 25 Watt DC-DC Converter DC/DC Converters Measures: 1.00 x 1.00 x 0.40” THL 25WI Series 25 Watt General Specifications Temperature ranges – Operating (natural convection 20 LFM) –40°C to +80°C (with derating) – Operating with heat sink (natural convection 20 LFM) –40°C to +85°C (with derating) – Case temperature +105°C max. – Storage –50°C to +125°C Load derating – without heat sink 2.0 %/K above +55°C (natural convection 20 LFM, – with heat sink 2.5 %/K above +65°C typical values over series) see application note for particular models Thermal impedance – Natural convection 17.6°C/W – Natural convection with heat sink 14.8°C/W Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >315’000 h Isolation voltage (60sec.) – Input/Output 1500 VDC Isolation capacitance – Input/Output 2000 pF max. Isolation resistance – Input/Output (500 VDC) >1000 MOhm Remote On/Off – On: 3.5 ... 15 VDC or open circuit – Off: 0 ... 1.2 VDC or short circuit pin 6 and pin 2 – Off idle current: 3 mA typ. Switching frequency (fixed) 285 kHz typ. (pulse width modulation PWM) Altitude during operation 4‘000 m max. (13‘123 ft) approved Safety standards (designed to meet) UL/cUL 60950-1, IEC/EN 60950-1 Safety approvals – CSA certificate of compliance CAN/CSA-C22.2 No 60950-1-07, Am 1:2011 ANSI/UL Std No 60950-1, 2nd Ed, AM 1:2011 – CB test certificate IEC 60950-1:2005 2nd Ed, Am 1:2009 – Certification documents www.tracopower.com/overview/thl25wi Environmental compliance – Reach www.tracopower.com/overview/thl25wi – RoHS RoHS directive 2011/65/EU Physical Specifications Casing material aluminium alloy, black anodized coating Baseplate non conductive FR4 Potting material epoxy (UL 94V-0 rated) Pin material copper alloy with gold plated subplate Weight 16.5 g (0.58 oz) Soldering temperature max. 260°C / 10sec. Application note : www.tracopower.com/products/thl25wi-application.pdf All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 3 of 4 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THL25-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Pending TRACO POWER THL25-WI SERIES 25 Watt DC-DC Converter DC/DC Converters Measures: 1.00 x 1.00 x 0.40” THL 25WI Series 25 Watt Outline Dimensions 7.62 5.08 Pin-Out (0.2) (0.3) Pin Single Dual 2 1 6 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) Bottom view 3 +Vout +Vout 5 4 3 4 Trim Common 5 –Vout –Vout 6.0 10.2 2.5 10.16 10.16 (0.4) (0.24) (0.1) (0.4) 6 Remote On/Off (0.4) 25.4 (1.0) Dimensions in [mm], () = Inch Pin diameter ø 1.0 (0.04) Pin pitch tolerances: ±0.25 (±0.01) Tolerances: ±0.5 (±0.02) Heat-Sink (optional) Order code: THL-HS1 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 4 g (0.14 oz) without converter Thermal impedance after assembling: 15.8 K/W 31.0 (1.22) max. Note: Heat-sink Thermal pad The product label on converter has to be re- Clamp moved before mounting the heat-sink. Converter For volume orders converters will be sup- plied with mounted heat-sink. Please contact factory for quotation. 17.5 (0.69) Separate heat-sinks are only available for max. prototypes and small quantity orders. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work pr Rev. April 07 operly and r . 2015 eliably. www.tracopower.com Page 4 of 4 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THL25-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 20.32 (0.8) 2.5 (0.1) 25.4 (1.0) 16.3 (0.64)