TRACO POWER THM10-2415WI

Traco Power DC/DC Converters THM10-WI SERIES THM 10WI Series, 10 Watt 10 Watt High Isolation / Reinforced Insulation DC-DC Converter Measures: 1.25 x 0.80 x 0.40”” Features ES 60601-1 ◆ Ultra wide 4:1 input voltage ◆ I/O isolation 5000 VACrms rated for 250 VACrms working voltage ◆ 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition ◆ Low leakage current <2 µA ◆ Very high efficiency up to 89% ◆ Extended operating temperature range The THM-10WI series is a range of high performance, regulated 10 Watt DC/DC –40°C to 85°C. converters in a DIP-24 plastic package. The reinforced I/O-isolation system com- ◆ Input filter to meet EN55022 class A plies with the medical safety requirements for MOPP (Means Of Patient Protec- ◆ 3-year product warranty tion). Together with a wide 4:1 input voltage range, and an internal EMI filter to meet EN55022 class A the converters constitute also a reliable solution for many demanding applications such as transportation systems, industrial control equip- ments, measurement equipments, and some IGBT driver applications. With A high efficiency of up to 87% and highest grade components the converters can reliably operate in an ambient temperature range of –40 up to +85°C. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. THM 10-0510WI 3.3 VDC 2500 mA 80.0 % THM 10-0511WI 5.0 VDC 2000 mA 84.0 % THM 10-0512WI 12 VDC 830 mA 86.5 % THM 10-0513WI 15 VDC 670 mA 87.0 % 4.5 – 9 VDC THM 10-0515WI 24 VDC 416 mA 85.5 % (5 VDC nominal) THM 10-0521WI ±5.0 VDC ±1000 mA 83.0 % THM 10-0522WI ±12 VDC ±416 mA 85.5 % THM 10-0523WI ±15 VDC ±333 mA 86.5 % THM 10-2410WI 3.3 VDC 2500 mA 83.0 % THM 10-2411WI 5.0 VDC 2000 mA 86.5 % THM 10-2412WI 12 VDC 830 mA 89.0 % THM 10-2413WI 15 VDC 670 mA 89.0 % 9 – 36 VDC THM 10-2415WI 24 VDC 416 mA 89.0 % (12 VDC nominal) THM 10-2421WI ±5.0 VDC ±1000 mA 85.0 % THM 10-2422WI ±12 VDC ±416 mA 89.0 % THM 10-2423WI ±15 VDC ±333 mA 88.0 % THM 10-4810WI 3.3 VDC 2500 mA 82.5 % THM 10-4811WI 5.0 VDC 2000 mA 86.5 % THM 10-4812WI 12 VDC 830 mA 89.0 % THM 10-4813WI 15 VDC 670 mA 89.0 % 18 – 75 VDC THM 10-4815WI 24 VDC 416 mA 88.5 % (48 VDC nominal) THM 10-4821WI ±5.0 VDC ±1000 mA 85.0 % THM 10-4822WI ±12 VDC ±416 mA 88.0 % THM 10-4823WI ±15 VDC ±333 mA 88.0 % http://www.tracopower.com Page 1 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THM10-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Traco Power THM10-WI SERIES DC/DC Converters 10 Watt High Isolation / Reinforced Insulation DC-DC Converter THM 10WI Series 10 Watt Measures: 1.25 x 0.80 x 0.40”” Input Specifications Input current at no load 5 Vin models: 20 mA typ. 24 Vin models: 6 mA typ. 48 Vin models: 4 mA typ. Start-up voltage / under voltage shut down 5 Vin models: 4.5 VDC / 4.0 VDC typ. 24 Vin models: 9.0 VDC / 8.0 VDC typ. 48 Vin models: 18 VDC / 16 VDC typ. Surge voltage (1 sec. max.) 5 Vin models: 16 VDC max. 24 Vin models: 50 VDC max. 48 Vin models: 100 VDC max. Conducted noise EN 55022 class A, without external components ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Fast transient / surge (with external input capacitor / diode) EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV perf. criteria A – external input capacitor: 5 Vin models: Nippon chemi-con KY 1000 µF/ 25 V and reverse diode (Vishay V10P45) in parallel 24 Vin models: Nippon chemi-con KY 470 µF/ 50 V 48 Vin models: Nippon chemi-con KY 330 µF/ 100 V Conducted immunity EN 61000-4-6, 10 V, perf. criteria A External input fuse required (recommended values, slow blow type) 5 Vin models: 10 A 24 Vin models: 5 A 48 Vin models: 2.5 A Output Specifications Voltage set accuracy ±1.0 % max. Regulation – Input variation single output models 0.2 % max. dual output models 0.5 % max. – Load variation 0 – 100 %: single output models: 0.2 % max.. dual output models balanced load: 1.0 % max. dual output models unbalanced load: 5.0 % max. Minimum load not required Start up time 30 mS Ripple and noise (20 MHz Bandwidth) 3.3 & 5.0 VDC models: 30 mVp-p typ. with cap. 10µF/25V X7R MLCC 12 & 15 VDC models: 40 mVp-p typ. with cap. 10µF/25V X7R MLCC 24 VDC models: 50 mVp-p typ. with cap. 4.7µF/50V X7R MLCC Transient response (25% load step change) 250 µs typ. Current limitation 150 % Iout nominal typ. (hiccup mode) Short circuit protection continuous (automatic recovery) Over voltage protection 3.3 VDC output models: 3.7 – 5.4 VDC 5 VDC output models: 5.6 – 7.0 VDC 12 VDC output models: 13.5 – 19.6 VDC 15 VDC output models: 18.3 – 22.0 VDC 24 VDC output models: 29.1 – 32.5 VDC Capacitive load 3.3 VDC output models: 3000 µF max. 5 VDC output models: 2500 µF max. 12 VDC output models: 430 µF max. 15 VDC output models: 350 µF max. 24 VDC output models: 125 µF max. ±5 VDC output models: 1440 µF max. (each output) ±12 VDC output models: 250 µF max. (each output) ±15 VDC output models: 180 µF max. (each output) All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THM10-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Traco Power THM10-WI SERIES 10 Watt High Isolation / Reinforced Insulation DC-DC Converter DC/DC Converters Measures: 1.25 x 0.80 x 0.40”” THM 10WI Series 10 Watt General Specifications Temperature ranges – Operating –40°C to +85°C (with derating) – Casing +105°C max. – Storage –55°C to +125°C Derating 3.6 %/K above +77°C Humidity (non condensing) 95 % rel H max. Temperature coefficient ±0.02 %/K typ. Switching frequency 300 kHz ±30 kHz. (puls width modulation) I/O isolation voltage – to meet ES/IEC/EN 60601-1 5000 VACrms, rated for 250 VACrms working (50Hz, 60sec.) voltage, 2 x MOPP Clearance/creepage 8 mm min. Leakage current 2 µA max. (at 240 VAC, 60 Hz) Isolation capacitance – Input/Output 17 pF max. (at 100 KHz, 1 V) Safety standards ANSI/AAMI ES 60601-1:2005/(R)2012, IEC/EN 60601-1 3rd edition Safety approvals – UL online certification ES 60601-1 www.ul.com File e188913, copy: e188913qqhm2.pdf Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >3.8 Mio h Casing material non conductive plastic (UL 94V-0-rated) Potting material silicone (UL 94V-0-rated) Vibration and thermal shock resistance according to MIL-STD-810F Weight 14.0 g (0.48 oz) Soldering temperature max. 265°C / 10 sec. Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS according RoHS directive 2011/65/EU - The component is not be used in an oxygen rich environment. - The component is not to be used in conjunction with flammable anaesthetics and agents. - The component has to be disposed appropriately. Please refer to local regulations (Waste Electrical and Electronic Equipment). - A modification of the component is not allowed. Outline Dimensions Standard Pinout Standard pinning Optional pinning: suffix -A1 Pin Single Dual 2 11 1 11 12 2 –Vin (GND) –Vin (GND) 11 No con. –Vout Bottom view Bottom view 14 +Vout +Vout 23 22 16 14 24 23 15 13 16 –Vout Common 22 +Vin (Vcc) +Vin (Vcc) 31.8 (1.25) 31.8 (1.25) 23 +Vin (Vcc) +Vin (Vcc) Optional Pinout Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 11 No pin Common 4.5 2.0 (0.18) (0.08) 12 –Vout No pin 2.54 15.24 (0.60) 5.08 2.54 20.32 (0.80) 2x2.54 (0.10) (0.20) (0.10) (2x0.1) 13 +Vout –Vout 15 No pin +Vout Dimensions in [mm], () = Inch Tolerances ±0.5 (±0.02) 23 –Vin (GND) –Vin (GND) Pin ø 0.6 ±0.1 (0.024 ±0.004) Pin pich tolerances ±0.25 (±0.01) 24 –Vin (GND) –Vin (GND) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. July 18. 2014 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. www.tracopower.com Page 3 of 3 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THM10-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 3.8 10.2 (0.40) 2.54 15.24 (0.60) (0.15) (0.10) 20.3 (0.80) 3.8 10.2 (0.40) 2.54 15.24 (0.60) (0.15) (0.10) 20.3 (0.80)