TRACO POWER THM3-4822WI

Traco Power DC/DC Converters THM3-WI SERIES 3 Watt High Isolation / Reinforced Insulation DC-DC Converter THM 3WI Series, 3 Watt Measures: 1.25 x 0.80 x 0.40” Features ES 60601-1 ◆ Ultra wide 4:1 input voltage ◆ I/O isolation 5000 VACrms rated for 250 VACrms working voltage ◆ 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition ◆ Low leakage current <2 µA ◆ Very high efficiency up to 87% ◆ Extended operating temperature range The THM-3WI series is a range of high performance, regulated 3 Watt DC/DC –40°C to 94°C at full load. converters in a DIP-24 plastic package. The reinforced I/O-isolation system com- ◆ Input filter to meet EN55022 class A plies with the medical safety requirements for MOPP (Means Of Patient Protection). ◆ 3-year product warranty Together with a wide 4:1 input voltage range, and an internal EMI filter to meet EN55022 class A the converters constitute also a reliable solution for many de- manding applications such as transportation systems, industrial control equipments, measurement equipments, and some IGBT driver applications. With A high efficien- cy of up to 87% and highest grade components the converters can reliably operate in an ambient temperature range of –40 up to +94°C at full load. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. THM 3-0510WI 3.3 VDC 1000 mA 81.0 % THM 3-0511WI 5.0 VDC 600 mA 84.5 % THM 3-0512WI 12 VDC 250 mA 85.5 % THM 3-0513WI 15 VDC 200 mA 87.5 % 4.5 – 9 VDC THM 3-0515WI 24 VDC 125 mA 85.5 % (5 VDC nominal) THM 3-0521WI ±5.0 VDC ±300 mA 83.0 % THM 3-0522WI ±12 VDC ±125 mA 86.0 % THM 3-0523WI ±15 VDC ±100 mA 86.0 % THM 3-2410WI 3.3 VDC 1000 mA 82.0 % THM 3-2411WI 5.0 VDC 600 mA 84.5 % THM 3-2412WI 12 VDC 250 mA 87.0 % THM 3-2413WI 15 VDC 200 mA 87.0 % 9 – 36 VDC THM 3-2415WI 24 VDC 125 mA 87.0 % (12 VDC nominal) ±5.0 VDC ±300 mA 83.0 % THM 3-2421WI THM 3-2422WI ±12 VDC ±125 mA 87.0 % THM 3-2423WI ±15 VDC ±100 mA 86.0 % THM 3-4810WI 3.3 VDC 1000 mA 81.0 % THM 3-4811WI 5.0 VDC 600 mA 84.0 % THM 3-4812WI 12 VDC 250 mA 87.0 % THM 3-4813WI 15 VDC 200 mA 86.5 % 18 – 75 VDC THM 3-4815WI 24 VDC 125 mA 86.5 % 48 VDC nominal) THM 3-4821WI ±5.0 VDC ±300 mA 83.0 % THM 3-4822WI ±12 VDC ±125 mA 86.0 % THM 3-4823WI ±15 VDC ±100 mA 86.0 % http://www.tracopower.com Page 1 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THM3-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Traco Power THM3-WI SERIES DC/DC Converters 3 Watt High Isolation / Reinforced Insulation DC-DC Converter THM 3WI Series 3 Watt Measures: 1.25 x 0.80 x 0.40” Input Specifications Input current at no load 5 Vin models: 20 mA typ. 24 Vin models: 6 mA typ. 48 Vin models: 4 mA typ. Start-up voltage / under voltage shut down 5 Vin models: 4.5 VDC / 4.0 VDC typ. 24 Vin models: 9.0 VDC / 8.0 VDC typ. 48 Vin models: 18 VDC / 16 VDC typ. Surge voltage (1 sec. max.) 5 Vin models: 16 VDC max. 24 Vin models: 50 VDC max. 48 Vin models: 100 VDC max. Conducted noise EN 55022 class A, without external components ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Fast transient / surge (with external input capacitor / diode) EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV perf. criteria A – external input capacitor: 5 Vin models: Nippon chemi-con KY 1000 µF/ 25 V and reverse diode (Vishay V10P45) in parallel 24 Vin models: Nippon chemi-con KY 470 µF/ 50 V 48 Vin models: Nippon chemi-con KY 330 µF/ 100 V Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A External input fuse required (recommended values, slow blow type) 5 Vin models: 2.5 A 24 Vin models: 1.5 A 48 Vin models: 1 A Output Specifications Voltage set accuracy ±1.0 % max. Regulation – Input variation single output models 0.2 % max. dual output models 0.5 % max. – Load variation 0 – 100 %: single output models: 0.2 % max.. dual output models balanced load: 1.0 % max. dual output models unbalanced load: 5.0 % max. Minimum load not required Start up time 30 mS Ripple and noise (20 MHz Bandwidth) 3.3 & 5.0 VDC models: 30 mVp-p typ. with cap. 10µF/25V X7R MLCC 12 & 15 VDC models: 40 mVp-p typ. with cap. 10µF/25V X7R MLCC 24 VDC models: 50 mVp-p typ. with cap. 4.7µF/50V X7R MLCC Transient response (25% load step change) 250 µs typ. Current limitation 150 % Iout nominal typ. (hiccup mode) Short circuit protection continuous (automatic recovery) Over voltage protection 3.3 VDC output models: 3.7 – 5.0 VDC 5 VDC & ±5 VDC output models: 5.6 – 7.0 VDC 12 VDC output models: 13.5 – 16.0 VDC 15 VDC output models: 18.3 – 22.0 VDC 24 VDC output models: 29.1 – 34.5 VDC ±12 VDC output models: 13.5 – 18.2 VDC ±15 VDC output models: 17.0 – 22.0 VDC Capacitive load 3.3 VDC output models: 1050 µF max. 5 VDC output models: 750 µF max. 12 VDC output models: 130 µF max. 15 VDC output models: 100 µF max. 24 VDC output models: 39 µF max. ±5 VDC output models: 430 µF max. (each output) ±12 VDC output models: 75 µF max. (each output) ±15 VDC output models: 56 µF max. (each output) All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THM3-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Traco Power THM3-WI SERIES DC/DC Converters 3 Watt High Isolation / Reinforced Insulation DC-DC Converter THM 3WI Series 3 Watt Measures: 1.25 x 0.80 x 0.40” General Specifications Temperature ranges – Operating –40°C to +90°C (without derating) – Casing +105°C max. – Storage –55°C to +125°C Humidity (non condensing) 95 % rel H max. Temperature coefficient ±0.02 %/K typ. Altitude 5000 m Switching frequency 150 kHz ±15 kHz (puls width modulation) I/O isolation voltage – to meet UL/IEC/EN 60601-1 5000 VACrms, rated for 250 VACrms working (50Hz, 60sec.) voltage, 2 x MOPP Clearance/creepage 8 mm min. Leakage current 2 µA max. (at 240 VAC, 60 Hz) Isolation capacitance – Input/Output 17 pF max. (at 100 KHz, 1 V) Safety standards ANSI/AAMI ES 60601-1:2005/(R)2012, UL 60601-1, IEC/EN 60601-1 3rd edition – Certification documents www.tracopower.com/overview/thm3wi Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >6.4 Mio. h Casing material non conductive plastic (UL 94V-0-rated) Potting material silicone (UL 94V-0-rated) Vibration and thermal shock resistance according to MIL-STD-810F Weight 14.0 g (0.48 oz) Soldering temperature max. 265°C / 10 sec. Environmental compliance – Reach www.tracopower.com/overview/thm3wi – RoHS according RoHS directive 2011/65/EU - The component is not be used in an oxygen rich environment. - The component is not to be used in conjunction with flammable anaesthetics and agents. - The component has to be disposed appropriately. Please refer to local regulations (Waste Electrical and Electronic Equipment). - A modification of the component is not allowed. Outline Dimensions Standard pinning Standard Pinout Optional pinning: suffix -A1 Pin Single Dual 2 11 1 11 12 2 –Vin (GND) –Vin (GND) 11 No con. –Vout Bottom view Bottom view 14 +Vout +Vout 23 22 16 14 24 23 15 13 16 –Vout Common 22 +Vin (Vcc) +Vin (Vcc) 31.8 (1.25) 31.8 (1.25) 23 +Vin (Vcc) +Vin (Vcc) Optional Pinout Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 11 No pin Common 4.5 2.0 (0.18) (0.08) 12 –Vout No pin 2.54 15.24 (0.60) 5.08 2.54 20.32 (0.80) 2x2.54 (0.10) (0.20) (0.10) (2x0.1) 13 +Vout –Vout 15 No pin +Vout Dimensions in [mm], () = Inch Tolerances ±0.5 (±0.02) 23 –Vin (GND) –Vin (GND) Pin ø 0.6 ±0.1 (0.024 ±0.004) Pin pich tolerances ±0.25 (±0.01) 24 –Vin (GND) –Vin (GND) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. August 17. 2015 www.tracopower.com Page 3 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THM3-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 3.8 10.2 (0.40) 2.54 15.24 (0.60) (0.15) (0.10) 20.3 (0.80) 3.8 (0.40) 2.54 15.24 (0.60) 10.2 (0.15) (0.10) 20.3 (0.80)