TRACO POWER THP3-4822

TRACO POWER DC/DC Converters THP3 SERIES THP 3 Series, 3 Watt 3 Watt High Isolation / Reinforced Insulation DC-DC Converter Measures: 1.25 x 0.80 x 0.41” CB Scheme UL 60950-1 Features UL 60601-1 ◆ Supplementary and reinforced insulation ◆ I/O isolation 3000 VACrms rated for 300 Vrms working voltage ◆ Medical safety to UL 60601-1 and IEC/EN 60601-1 3rd Edition, 2 x MOOP ◆ Industrial safety to IEC/EN/UL 60950-1 ◆ 9-40 VDC, 18-80 VDC and 36-160 VDC ◆ Extended operating temperature range –40°C to 85°C max. ◆ Input filter meets EN55022A without ext. components ◆ Continuous short circuit protection ◆ High reliability, MTBF >1 Mio. hours ◆ Lead free design, RoHS compliant The THP-3 series is a new range of high performance 3W DC/DC converters in ◆ 3-year product warranty a low profile DIL-24 package with standard industry pin-out. The very high I/O- isolation system of these converters and input voltages up to 160 VDC make this product the best choice for many demanding applications in railroad and transpor- tation systems, medical equipment, instrumentation, everywhere where high basic-, supplementary- or reinforced insulation is requested to meet specific safety stan- dards. A high efficiency allows safe operation in a temperature range of –40°C to +75°C at full load. Full SMD-design with exclusive use of ceramic capacitors ensure a very high reliability and a long product lifetime. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. THP 3-2411 5 VDC 600 mA 78 % THP 3-2412 9 – 40 VDC 12 VDC 250 mA 83 % THP 3-2422 (24 VDC nominal) ±12 VDC ±125 mA 83 % THP 3-2423 ±15 VDC ±100 mA 83 % THP 3-4811 5 VDC 600 mA 78 % THP 3-4812 18 – 80 VDC 12 VDC 250 mA 83 % THP 3-4822 (48 VDC nominal) ±12 VDC ±125 mA 83 % THP 3-4823 ±15 VDC ±100 mA 83 % THP 3-7211 5 VDC 600 mA 78 % THP 3-7212 36 – 160 VDC 12 VDC 250 mA 83 % THP 3-7222 (72 VDC nominal) ±12 VDC ±125 mA 83 % THP 3-7223 ±15 VDC ±100 mA 83 % Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 1 of 3 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THP3-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER THP3 SERIES 3 Watt High Isolation / Reinforced Insulation DC-DC Converter DC/DC Converters Measures: 1.25 x 0.80 x 0.41” THP 3 Series 3 Watt Input Specifications Input current at no load / full load 24 Vin models: 20 mA typ. / 160 mA typ. 48 Vin models: 10 mA typ. / 100 mA typ. 72 Vin models: 5 mA typ. / 85 mA typ. Start-up voltage / under voltage shut down 24 Vin models: 9 VDC / 8.5 VDC 48 Vin models: 17 VDC / 16 VDC 72 Vin models: 34 VDC / 32 VDC Recommended external input fuse (slow blow) 24 Vin models: 1.0 A 48 Vin models: 0.6 A 72 Vin models: 0.3 A Surge voltage (1 sec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. 72 Vin models: 180 V max. Reverse voltage protection 0.3 A max. Input filter EN 55022 class A, FCC part 15, class A Output Specifications Voltage set accuracy ±1 % Voltage balance (dual output models) 2 % max. Regulation – Input variation Vin min. to Vin max. 0.5 % max. – Load variation 25 – 100 %: 1.0 % max. Minimum load 15 % of rated max. output current. (Operation at lower load is safe but major deviations to specifyed data may occur) Ripple and noise (20 MHz Bandwidth) 5 VDC models: 75 mVpk-pk typ. other models: 100 mVpk-pk typ. Temperature coefficient ±0.02 %/K typ. Current limitation >120 % Iout max. Startup rise time 0 % to 100 % Vout 25 mS max. Short circuit protection indefinite (automatic recovery) Capacitive load 5 VDC models: 1000 µF max. 12 VDC models: 470 µF max. Dual output models: 220 µF max. (each output) Isolation / Safety I/O isolation test voltage (flash tested 1 sec.) 6000 Vpk I/O isolation voltage (50Hz, 60sec.) 3000 VACrms, rated for 300 Vrms working voltage, 2 x MOOP Leakage current (at 240VAC, 60Hz) 2 µA I/O isolation capacitance (at 100KHz, 1V) 7 pF typ. I/O isolation resistance (at 500VDC) >1000 Mohm Safety standards IEC/EN 60950-1, UL 60950-1 CSA C22.2 No. 60950-1-03 IEC/EN 60601-1 3rd edition, 2 x MOOP, UL 60601-1, CSA C22.2 No. 601.1 Safety approvals – CB test report according IEC 60950-1 www.tracopower.com/products/thp3-cb60950.pdf – CB test report according IEC 60601-1 www.tracopower.com/products/thp3-cb60601.pdf – CSA certificate according UL 60950-1/60601-1 www.tracopower.com/products/thp3-csa.pdf All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-THP3-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER THP3 SERIES 3 Watt High Isolation / Reinforced Insulation DC-DC Converter DC/DC Converters THP 3 Series Measures: 1.25 x 0.80 x 0.41” 3 Watt General Specifications Temperature ranges – Operating –40°C to +85°C – Casing +95°C max. – Storage –40°C to +125°C Derating 3.3 %/K above +70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C ground benign) >1 Mio. h Switching frequency 150 kHz typ. (puls width modulation) Casing material non conductive plastic (UL 94V-0-rated) Potting material Silicon TSE 3331 (UL 94V-0-rated) Weight 16.2 g (0.57 oz) Soldering temperature max. 265°C / 10 sec. Altitude during operation up to 5‘000 m (16‘400 ft) approved Environmental compliance – Reach www.tracopower.com/products/thp3-reach.pdf – RoHS RoHS directive 2011/65/EU Application note: www.tracopower.com/products/thp3-application.pdf - The component is not be used in an oxygen rich environment. - The component is not to be used in conjunction with flammable anaesthetics and agents. - The component has to be disposed appropriately. Please refer to local regulations (Waste Electrical and Electronic Equipment). - A modification of the component is not allowed. Outline Dimensions 31.8 (1.25) Pin-Out Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 11 No pin Common 12 –Vout No pin 2.54 20.32 (0.8) 2x2.54 2.0 13 +Vout –Vout (0.1) (2x0.1) (0.08) 15 No pin +Vout 23 –Vin (GND) –Vin (GND) 24 –Vin (GND) –Vin (GND) 111 12 Dimensions in [mm], () = Inch Bottom view Pin diameter ø 0.6 ±0.05 (0.024 ±0.002) Tolerances ±0.5 (±0.02) 24 23 15 13 Pin pich tolerances ±0.2 (±0.01) Specifications can be changed any time without notice. Rev. 10/12 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com power@sager Page 3 of 3 .com http://power.sager.com/traco-power-THP3-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 15.2 (0.6) 2.54 0.2 (0.008) (0.1) 20.3 (0.8) 3.9 10.5 (0.41) (0.15)