TRACO POWER TIM3.5-4822

DC/DC Converter TIM 3.5 Series, 3.5 Watt • Compact DIP-16-package • I/O isolation 5000 VACrms rated for 250 VACrms working voltage • Certification according to IEC/EN/ES 60601-1 3rd edition for 2xMOPP and opperation to 5000 m altitude • Low leakage current < 2 µA for BF-applications • Extended operating temperature range –40°C to 90°C. The TIM 3.5 series is a range of 3.5 Watt DC/DC converters in compact DIP-16 • EMC compliance to IEC 60601-1-2 4th package and with reinforced isolation of 5000 VACrms for medical applications. edition and EN55032 class A With a low leakage current of less than 2 µA the converters are predestined to • 5-year product warranty insulate electrical equipment from the applied parts to patient (BF classification). The models are approved to IEC/EN/ES 60601-1 3rd edition for 2xMOPP up to an altitude of 5000m and come along with an ISO 14971 risk management file. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. TIM 3.5-0911 5.0 VDC 700 mA 77 % TIM 3.5-0919 9.0 VDC 389 mA 78 % TIM 3.5-0912 12 VDC 292 mA 81 % 4.5 – 12 VDC TIM 3.5-0913 (9 VDC nominal) 15 VDC 234 mA 81 % TIM 3.5-0915 24 VDC 146 mA 81 % TIM 3.5-0922 ±12 VDC ±146 mA 81 % TIM 3.5-0923 ±15 VDC ±117 mA 81 % TIM 3.5-1211 5.0 VDC 700 mA 79 % TIM 3.5-1219 9.0 VDC 389 mA 80 % TIM 3.5-1212 12 VDC 292 mA 82 % 9.0 – 18 VDC TIM 3.5-1213 (12 VDC nominal) 15 VDC 234 mA 82 % TIM 3.5-1215 24 VDC 146 mA 82 % TIM 3.5-1222 ±12 VDC ±146 mA 82 % TIM 3.5-1223 ±15 VDC ±117 mA 82 % TIM 3.5-2411 5.0 VDC 700 mA 79 % TIM 3.5-2419 9.0 VDC 389 mA 80 % TIM 3.5-2412 12 VDC 292 mA 82 % 18 – 36 VDC TIM 3.5-2413 (24 VDC nominal) 15 VDC 234 mA 83 % TIM 3.5-2415 24 VDC 146 mA 82 % TIM 3.5-2422 ±12 VDC ±146 mA 82 % TIM 3.5-2423 ±15 VDC ±117 mA 83 % TIM 3.5-4811 5.0 VDC 700 mA 79 % TIM 3.5-4819 9.0 VDC 389 mA 80 % TIM 3.5-4812 12 VDC 292 mA 81 % 36 – 75 VDC TIM 3.5-4813 (48 VDC nominal) 15 VDC 234 mA 82 % TIM 3.5-4815 24 VDC 146 mA 81 % TIM 3.5-4822 ±12 VDC ±146 mA 81 % TIM 3.5-4823 ±15 VDC ±117 mA 82 % www.tracopower.com Page 1 of 4 TIM 3.5 Series, 3.5 Watt Input Specifications Input current no load 9 Vin models: 90 mA typ. 12 Vin models: 50 mA typ. 24 Vin models: 30 mA typ. 48 Vin models: 13 mA typ. Surge voltage (1 s max.) 9 Vin models: 15 V max. 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Start-up voltage 9 Vin models: 4.5 VDC (or lower) 12 Vin models: 9.0 VDC (or lower) 24 Vin models: 18 VDC (or lower) 48 Vin models: 36 VDC (or lower) Startup time 10 ms typ. / 20 ms max. Under voltage shut down 9 Vin models: 2 - 4 VDC 12 Vin models: 6 - 8 VDC 24 Vin models: 13 - 17 VDC 48 Vin models: 29 - 35 VDC Input filter capacitor type Conducted noise – Conducted & Radiated input surpression EN 55011 limits to IEC/EN 60601-1-2 4th edit. EN 55032 class A or B with external components – Application note for filter class A/B proposal www.tracopower.com/overview/tim3 EMC immunity – Generic for Medical equipment IEC/EN 60601-1-2 4th edition – ESD (electrostatic discharge) EN 61000-4-2, air ±15 kV, contact ±8 kV, perf. criteria A – Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A – Fast transient / surge EN 61000-4-4, ±2 kV, perf. criteria A (with external input capacitor / diode) EN 61000-4-5, ±1 kV perf. criteria A 9 Vin models: Nippon chemi-con KY 1000 µF / 25 V TVS - SMAJ18A, 18 V, 400 W 12 & 24 Vin models: Nippon chemi-con KY 470 µF / 50 V 48 Vin models: Nippon chemi-con KY 220 µF / 100 V – Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A – Magnetic field immunity EN 61000-4-8 100 A/m, continuous, perf. criteria A 1000 A/m, 1 sec., perf. criteria A External input fuse required 9 Vin models: 1.6 A (slow blow) 12 Vin models: 0.8 A (slow blow) 24 Vin models: 0.5 A (slow blow) 48 Vin models: 0.315 A (slow blow) Output Specifications Voltage set accuracy ±1 % max. Regulation – Input variation (Vin min. to Vin max.) 0.2 % max. – Load variation (0 – 100 %) 1 % max. – Load variation (10 – 90 %) single output: 0.5 % max. dual output: 0.8 % max. – Cross regulation dual output: 5.0 % max. (asymmetrical load 25 / 100 %) Minimum load not required Ripple and noise (20 MHz Bandwidth) 5 - 15 Vout models: 50 mVp-p typ. 24, ±12 & ±15 Vout models: 75 mVp-p typ. Transient response (25% load step change) – Recovery time 500 µs typ. Short circuit protection Continuous, automatic recovery All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 2 of 4 TIM 3.5 Series, 3.5 Watt General Specifications Overvoltage protection 5.0 VDC models: 6 - 8 VDC 9.0 VDC models: 10 - 14 VDC 12 VDC models: 13 - 19 VDC 15 VDC models: 16 - 22 VDC 24 VDC models: 25 - 35 VDC Capacitive load – Single output 5.0 VDC models: 1‘470 µF max. 9.0 VDC models: 680 µF max. 12 VDC models: 470 µF max. 15 VDC models: 330 µF max. 24 VDC models: 170 µF max. – Dual output ±12 VDC models: 220 µF max. (each output) ±15 VDC models: 160 µF max. (each output) Temperature ranges – Operating (natural convection: 20 LFM, 0.1 m/s) –40°C to +90°C – Case temperature +105°C max. – Storage temperature –55°C to +125°C Derating 3.3 %/K above 75°C Humidity (non condensing) 5 % to 95 % rel H max. Isolation voltage (50 Hz, 60 s) 5000 VAC (reinforced insulation) Working voltage 250 VAC, 2 x MOPP Isolation capacitance 20 pF max. Clearance/creepage 8 mm min. Leakage current ( at 240 VAC, 60 Hz) 2 µA max. Altitude during operation 5000 m max. Temperature coefficient ±0.02 %/K max. Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) 5‘041‘000 h Switching frequency 100 kHz min. (frequency modulated) Shock, vibration and thermal shock resistance according to MIL-STD-810F Remote On/Off – On: open circuit or high impedance – Off: 2 – 4 mA current applied via 1kOhm resistor – Off idle current: 2.5 mA typ. Safety standards/approvals – Medical equipment ANSI/AAMI ES60601-1:2005/(R)2012, IEC/EN60601-1 3rd edition – Certification documents www.tracopower.com/overview/tim3 Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU Physical Specifications Casing material non-conductive black plastic Base material non-conductive black plastic Potting material silicone (UL94 V-0) Package weight 7.0 g (0.24 oz) Soldering temperature 260°C / 10 s max. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 3 of 4 TIM 3.5 Series, 3.5 Watt Outline Dimensions 14.4 (0.57) 10.16 (0.400) 16 1 2 Standard Pinout Pin Single Dual 1 –Vin (GND) –Vin (GND) BOTTOM VIEW 2 On/Off On/Off 7 NC NC 8 NC Common 9 +Vout +Vout 10 7 10 –Vout –Vout Ø 0.60 16 +Vin (Vcc) +Vin (Vcc) 9 8 (0.0024) 2.1 3.8 (0.08) (0.15) 10.2 (0.40) Dimensions in mm (inch) Tolerances ±0.5 (±0.02) Pin ø 0.6 ±0.1 (0.024 ±0.004) Pin pitch tolerances ±0.25 (±0.01) © Copyright 2018 Traco Electronic AG Specifications can be changed without notice! Rev. March 8, 2018 Page 4 of 4 www.tracopower.com 24.3 (0.95) 15.24 (0.600) 2.54 (0.100) 3.2 (0.13)