TRACO POWER TMDC40-4818

TRACO POWER DC/DC Converters TMDC40 SERIES 40 Watt Chassi Mount DC/DC Converter TMDC 40 Series, 40 Watt Measures: 4.41 x 2.51 x 1.01” CB Features Scheme ◆ Fully encapsulated low profile plastic case ◆ Ultra wide 4 : 1 input voltage range ◆ Operating temperature range –40°C to +85°C ◆ I/O isolation 2500 VDC ◆ Excellent efficiency up to 92 % ◆ Input filter to meet EN 55022, class A ◆ Optional DIN-Rail mount adapter ◆ No minimum load required ◆ Remote On/Off ◆ 3-year product warranty The TMDC 40 Series is a range of encapsulated high performance DC/DC con- verter modules. With a very high efficiency of up to 92% and the use of high- est reliable components these 40 W converters are avialable as a chassis- mount with screw terminlas or PCB versions. The 8 models have a wide 4:1 input voltage range and a tight output voltage regulation. They do not need a minimum load and offer a high efficiency also at low load conditions. Remote On/Off and protection against overload and short circuit are standard features of these converters. Models Order code Input voltage range Output voltage Output current max. Efficiency TMDC 40-2411 5.1 VDC 8‘000 mA 90 % TMDC 40-2412 12 VDC 3‘330 mA 90 % 9 – 36 VDC TMDC 40-2415 24 VDC 1670 mA 90 % (nominal 24 VDC) TMDC 40-2418 48 VDC 835 mA 89 % TMDC 40-4811 5.1 VDC 8‘000 mA 89 % TMDC 40-4812 12 VDC 3’330 mA 91 % 18 – 75 VDC TMDC 40-4815 24 VDC 1670 mA 92 % (nominal 48 VDC) TMDC 40-4818 48 VDC 835 mA 90 % Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-tmdc40-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om http://www.tracopower.com Page 1 of 4 TRACO POWER TMDC40 SERIES DC/DC Converters 40 Watt Chassi Mount DC/DC Converter TMDC 40 Se Measures: 4.41 x 2.51 x 1.01” ries 40 Watt Input Specifications Input current at no load (nominal input voltage) 24 Vin models: 90 mA typ 48 Vin models: 55 mA typ. Surge voltage (100 msec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Start up time 30 ms max. Conducted noise (input) EN 55022 class A, FCC part 15 class A without external components Start-up voltage / under voltage shut down 24 Vin models: 9 VDC max./ 7.5 VDC typ. 48 Vin models: 18 VDC max./ 16 VDC typ. ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±4 kV, perf. criteria A Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Fast transient / surge EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV, perf. criteria A Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Output Specifications Voltage set accuracy ±2.0 % max. Regulation – Input variation Vin min. to Vin max. 0.5 % max. – Load variation 0 – 100 % 1.0 % max. Minimum load not required Temperature coefficient ±0.02 %/K Ripple and noise (20 MHz Bandwidth) 5.1 VDC models: 100 mVpk-pk. typ. 12 & 24 VDC models: 150 mVpk-pk typ. 48 VDC models: 200 mVpk-pk. typ. Transient response (alignment to 1% at load step change 75% to 100% ) 250 µs typ. Over voltage protection 120 % of Vout (Zener diode clamp) Output current limitation at 150% of Iout max. Short circuit protection hiccup mode, automatic recovery Capacitive load 5.1 VDC models: 13‘600 µF max. 12.0 VDC models: 2’400 µF max. 24.0 VDC models: 600 µF max. 48.0 VDC models: 150 µF max. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-tmdc40-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 TRACO POWER TMDC40 SERIES DC/DC Converters 40 Watt Chassi Mount DC/DC Converter TMDC 40 SeMeasures: 4.41 x 2.51 x 1.01” ries 40 Watt General Specifications Temperature ranges – Operating (natural convection 20 LFM) –40°C to +85°C (with derating) – IEC/EN/UL60950-1 approved ambient +65°C max. (without derating) – Case temperature +95°C max. – Storage –50°C to +125°C Load derating – natural convection 20 LFM 4.5 %/K above 73°C Thermal impedance – Natural convection 20 LFM 4.75 °C/W Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >644’290 h Isolation voltage (60 sec.) – Input/Output 2500 VDC Isolation capacitance – Input/Output 2400 pF max. (100 kHz, 1 V) Isolation resistance – Input/Output >1000 Mohm (500 VDC) Switching frequency 285 kHz typ. Remote On/Off – On: 3.5 to 12 VDC to -Vin or open circuit. – Off: 0 to +1.2 VDC or short circuit to -Vin – Off idle current: 3 mA typ. Safety standards – CB test report UL/cUL 60950-1 2nd edition, IEC 60950-1:2005 (2nd edition)+Am1:2009 +Am2:2013, EN 60950-1:2006+A11:2009+A1: 2010+A12:2011+A2:2013 – UL test certificat UL/cUL 60950-1 2nd edition, CSA C22.2 No. 60950-1-07, 2nd Ed. – Certification documents www.tracopower.com/overview/tmdc40 Physical Specifications Casing material plastic resin (UL 94V-0 rated) Weight 216 g (7.6 oz) Soldering temperature max. 260°C / 10 sec. (1.5 mm from casing) Environmental compliance – Reach declaration www.tracopower.com/overview/tmdc40 – RoHS directive 2011/65/EU Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-tmdc40-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 TRACO POWER TMDC40 SERIES DC/D 40 W Catt Chassi Mount DC/DC Converter Converters TMDC 40 Serie Measures: 4.41 x 2.51 x 1.01” s 40 Watt Outline Dimensions 63.8 (2.51) 25.6 (1.01) Pin-Out 50.0 (1.97) 6.9 5.0 11.8 (0.27) (0.20) (0.46) Pin Single 1 Remote On/Off 2 –Vin (GND) 48 57 6 3 +Vin (Vcc) 4 x ø3.5 4 +Vout 5 NC 6 –Vout 7 NC Top view 8 NC Dimensions in [mm], () = Inch 2 Terminals: Wires 1.5mm max. Recommended tightening torque: 0.5 to 0.7 Nm (4.5 to 6.2 lb.in.) 1 2 3 Case tolerances: ±0.25 (±0.01) DIN-Rail mount adapter (optional) Order code: TMP-MK2 Weight: 59 g (2.08 oz) without converter Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. October 27. 2015 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com www.tracopower.com Page 4 of 4 http://power.sager.com/traco-power-tmdc40-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 6.0 100.0 (3.94) (0.24) 112.0 (4.41) 10.0 92.0 (3.62) (0.39)