TRACO POWER TMDC60-2415

TRACO POWER DC/DC Converters TMDC60 SERIES 60 Watt Chassi Mount DC/DC Converter TMDC 60 Series, 60 Watt Measures: 4.41 x 2.67 x 1.50” CB Features Scheme ◆ Fully encapsulated low profile plastic case ◆ Ultra wide 4:1 input voltage range ◆ Operating temperature range –40°C to +85°C ◆ I/O isolation 2500 VDC (functional) ◆ Excellent efficiency up to 92 % ◆ Input filter to meet EN 55022, class A ◆ Optional DIN-Rail mount adapter ◆ No minimum load required ◆ Input polarity protection ◆ Power good LED indicator ◆ Remote On/Off ◆ 3-year product warranty The TMDC 60 Series is a range of encapsulated high performance DC/DC con- verter modules with ultra wide input voltage ranges. With a very high efficiency of up to 92% and the use of highest grade components these 60 W converters can be operated in an ambient temperature range of -40°C up to 70°C with full load and up to 85°C with 50% load reduction. The EMC immunity is aligned for industrial applications and DIN-rail mount adapters are available as option. Input polarity protection remote On/Off function and power good LED indicator makes this unit to a practical and reliable DC source for any application - Fit and forget! Models Order code Input voltage range Output voltage Output current max. Efficiency TMDC 60-2411 5.1 VDC 12‘000 mA 90 % TMDC 60-2412 12 VDC 5‘000 mA 91 % 9 – 36 VDC TMDC 60-2415 24 VDC 2500 mA 91 % (nominal 24 VDC) TMDC 60-2418 48 VDC 1250 mA 91 % TMDC 60-4811 5.1 VDC 12‘000 mA 91 % TMDC 60-4812 12 VDC 5’000 mA 92 % 18 – 75 VDC TMDC 60-4815 24 VDC 2500 mA 91 % (nominal 48 VDC) TMDC 60-4818 48 VDC 1250 mA 91 % Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-tmdc60-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om http://www.tracopower.com Page 1 of 4 TRACO POWER TMDC60 SERIES DC/DC Converters 60 Watt Chassi Mount DC/DC Converter TMDC 60 Se Measures: 4.41 x 2.67 x 1.50” ries 60 Watt Input Specifications Input current at no load – 24 Vin 5.1 & 12 VDC models: 100 mA typ. (nominal input voltage) 24 VDC models: 110 mA typ. 48 VDC models: 60 mA typ. – 48 Vin 5.1 VDC models: 40 mA typ. 12 & 24 VDC models: 60 mA typ. 48 VDC models: 50 mA typ. Surge voltage (100 msec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Start up time 50 ms max. Conducted noise (input) EN 55022 class A, FCC part 15 class A (without external components) Start-up voltage / under voltage lockout 24 Vin models: 9 VDC max./ 7.5 VDC typ. 48 Vin models: 18 VDC max./ 16 VDC typ. ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±4 kV, perf. criteria A Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Fast transient / surge EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV, perf. criteria A Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Output Specifications Voltage set accuracy ±2.0 % max. Regulation – Input variation Vin min. to Vin max. 1.5 % max. – Load variation 0 – 100 % 1.0 % max. Minimum load not required Temperature coefficient ±0.02 %/K Ripple and noise (20 MHz Bandwidth) 5.1 VDC models: 100 mVpk-pk. typ. 12 & 24 VDC models: 150 mVpk-pk typ. 48 VDC models: 200 mVpk-pk. typ. Transient response (alignment to 1% at load step change 75% to 100% ) 250 µs typ. Over voltage protection 120 % of Vout (Zener diode clamp) Output current limitation at 150 % of Iout max. Short circuit protection hiccup mode, automatic recovery Capacitive load 5.1 VDC models: 20‘400 µF max. 12.0 VDC models: 3’540 µF max. 24.0 VDC models: 890 µF max. 48.0 VDC models: 220 µF max. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-tmdc60-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 TRACO POWER TMDC60 SERIES DC/DC Converters 60 Watt Chassi Mount DC/DC Converter TMDC 60 SeMeasures: 4.41 x 2.67 x 1.50” ries 60 Watt General Specifications Temperature ranges – Operating ambient with natural convection (20 LFM) –40°C to +85°C (see load derating) – IEC/EN/UL60950-1 approved ambient +60°C max. (without derating) – Case temperature +95°C max. – Storage –50°C to +125°C Load derating (with natural convection 20 LFM) 3.3 %/K above +70°C Thermal impedance – Natural convection 20 LFM 3.5 K/W Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) 242’029 h Isolation voltage (60 sec.) – Input/Output 2500 VDC Isolation capacitance – Input/Output 3000 pF max. (100 kHz, 1 V) Isolation resistance – Input/Output >1000 Mohm (500 VDC) Switching frequency 210 kHz typ. Remote On/Off – On: 3.5 to 12 VDC to on terminal 1 or open circuit. – Off: 0 to +1.2 VDC on terminal 1 reference to -Vin – Off idle current: 3 mA typ. Safety standards – CB test report UL/cUL 60950-1 2nd edition, IEC 60950-1:2005 (2nd edition)+Am1:2009 +Am2:2013, EN 60950-1:2006+A11:2009+A1: 2010+A12:2011+A2:2013 – UL test certificat UL/cUL 60950-1 2nd edition, CSA C22.2 No. 60950-1-07, 2nd Ed. – Certification documents www.tracopower.com/overview/tmdc60 Physical Specifications Casing material plastic resin (UL 94V-0 rated) Weight 300 g (10.57 oz) Soldering temperature max. 260°C / 10 sec. (1.5 mm from casing) Environmental compliance – Reach declaration www.tracopower.com/overview/tmdc60 – RoHS directive 2011/65/EU Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-tmdc60-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 TRACO POWER TMDC60 SERIES DC/D 60 W Catt Chassi Mount DC/DC Converter Converters TMDC 60 Serie Measures: 4.41 x 2.67 x 1.50” s 60 Watt Outline Dimensions 67.8 (2.67) 38.0 (1.50) 50.0 (1.97) 8.9 5.0 11.8 Terminal connection (0.35) (0.20) (0.46) Pin Single 1 Remote On/Off 48 57 6 2 –Vin (GND) 4 x ø3.5 3 +Vin (Vcc) 4 NC 5 +Vout 6 NC 7 –Vout Top view 8 NC Dimensions in [mm], () = Inch 2 Terminals: Wires 1.5mm max. Recommended tightening torque: 0.5 to 0.7 Nm (4.5 to 6.2 lb.in.) 1 2 3 Case tolerances: ±0.25 (±0.01) DIN-Rail mount adapter (optional) Order code: TMP-MK2 Weight: 59 g (2.08 oz) without converter Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. October 27. 2015 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com www.tracopower.com Page 4 of 4 http://power.sager.com/traco-power-tmdc60-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 6.0 100.0 (3.94) (0.24) 112.0 (4.41) 10.0 92.0 (3.62) (0.39)