AC/DC Power Modules TMF Series, 5 – 30 W • Fully encapsulated power supplies in plasic casing for PCB mount • Certification according to IEC/EN/ES 60601-1 3rd edition for 2xMOPP • Risk management process according to ISO 14971 including risk management file • Acceptance criteria for electronic as semblies according to IPC-A-610 Level 3 • Low leakage current <100 µA rated for BF applications The TMF Series AC/DC power supply modules are designed and manufactured • Operating temperature range: based on workmanship standards and risk management to comply with the re- –25°C to +70°C max. quirements for quality, reliability and safety of medical equipment. The units are • Protection against short-circuit, approved to IEC/EN/ES 60601-1 edition 3.1 for 2 x MOPP (Means Of Patient over load and over voltage Protection) and come along with an ISO 14971 risk management file. These fully encapsulated modules are for PCB mount. They are designed for • Protection class II prepared protection class II applications (no earth connection) and feature a low leakage • 5 year product waranty current (<100 µA). A compact design and excellent EMC considerations facili- tate the design in. The thermal management enables an operation within a wide temperature range of -25 to +70°C and the isolation system is designed and ap- proved for an altitude of 5000 m (AMSL). This makes the power supplies suitable not only for stationary applications but also for transportable medical equipment. Models Order Code Output Power Output Voltage Output Current Efficiency (max.) (max.) (typ.) TMF 05105 5 W 5.0 VDC 1000 mA 77 % TMF 05112 5 W 12 VDC 417 mA 82 % TMF 05115 5 W 15 VDC 333 mA 82 % TMF 05124 5 W 24 VDC 208 mA 82 % TMF 10105 10 W 5.0 VDC 2000 mA 79 % TMF 10112 10 W 12 VDC 833 mA 84 % TMF 10115 10 W 15 VDC 666 mA 84 % TMF 10124 10 W 24 VDC 417 mA 84 % TMF 20105 18 W 5.0 VDC 3600 mA 78 % 12 VDC 1667 mA 84 % TMF 20112 20 W TMF 20115 20 W 15 VDC 1333 mA 84 % TMF 20124 20 W 24 VDC 833 mA 84 % TMF 30105 25 W 5.0 VDC 5000 mA 82 % TMF 30112 30 W 12 VDC 2500 mA 88 % TMF 30115 30 W 15 VDC 2000 mA 86 % TMF 30124 30 W 24 VDC 1250 mA 85 % www.tracopower.com Page 1 of 5 TMF Series, 5 – 30 W Input Specifications Input voltage – AC Input 90 – 264 VAC derating of 2%/V below 100 VAC required – DC Input 120 – 370 VDC Input frequency 47 – 63 Hz Leakage current (touch current) < 0.1 mA (at 264 VAC) Inrush current 5 W models: 10/20 A max. (115/230 VAC) 10 W models: 12/25 A max. (115/230 VAC) 20 W models: 20/40 A max. (115/230 VAC) 30 W models: 30/60 A max. (115/230 VAC) No-load power consumption < 0.15 W Output Specifications Voltage accuracy ± 2 % typ. Regulation – Input variation 0.5 % typ. – Load variation (0–100 %) 1.0 % typ. Minimum load not required Hold-up time 5 W models: 20/90 ms min. (115/230 VAC) 10 W models: 12/70 ms min. (115/230 VAC) 20 W models: 10/36 ms min. (115/230 VAC) 30 W models: 14/45 ms min. (115/230 VAC) Ripple and Noise (20MHz bandwidth) 5 VDC models: 100 mVp-p max. other models: 1 % of Vout max. Overload protection (current limit) hiccup, auto recovery Short circuit current hiccup, indefinite Output overvoltage protection zener diode Max. capacitive load [µF] Model series Output TMF 05 TMF 10 TMF 20 TMF 30 5.0 VDC 8000 13‘000 5000 6800 12 VDC 1200 2600 1500 1600 15 VDC 820 2600 1000 1200 24 VDC 330 600 560 470 General Specifications Temperature ranges – operational (natural convection: 20 LFM) –25 °C to +70 °C max. – Storage temperature –40 °C to +85 °C max. Power derating 5 & 10 Watt models: derating above +55ºC : 4 %/K 20 & 30 Watt models: derating above +50ºC : 3 %/K Temperature coefficient 0.05 %/K Cooling convection cooling, no internal fan Humidity (non condensing) 95 % rel. H max. Atmospheric pressure 54 kPa – 106 kPa Altitude during operation 5000 m max. Switching frequency (at 230 VAC) 5 & 10 W models: 40 kHz - 140 kHz 20 & 30 W models: 40 kHz - 73 kHz Isolation 4000 VAC MTBF (MIL-HDBK-217F, at 25 °C ground benign) 5 W models: > 450‘000 h 10 W models: > 400‘000 h 20 W models: > 350‘000 h 30 W models: > 300‘000 h All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 2 of 5 TMF Series, 5 – 30 W General Specifications (continued) Protection class class II prepared Safety standards IEC 60601-1:2005 (3rd Ed.)+ A1:2012, ANSI/AAMI ES60601-1:2005/(R)2012, CSA CAN/CSA-C22.2 NO. 60601-1:14 EN 60601-1:2006 + A1:2013 + A12:2014 – Certification documents www.tracopower.com/overview/tmf Electromagnetic compatibility (EMC), Emissions – Conducted & Radiated input surpression EN 55011 limits to IEC 60601-1-2 4th editon Electromagnetic compatibility (EMC), Immunity – Electrostatic discharge (ESD) IEC/EN 61000-4-2 8 kV / 15 kV criteria A – Radiated RF field immunity IEC/EN 61000-4-3 10 V/m criteria A – Electrical fast transient / burst immunity IEC/EN 61000-4-4 2 kV criteria A – Surge immunity* IEC/EN 61000-4-5 1 kV criteria A – Immunity to conducted RF disturbances IEC/EN 61000-4-6 10 V criteria A – Magnetic field immunity IEC/EN 61000-4-8 30 A/m criteria A – Mains voltage dips and interruptions IEC/EN 61000-4-11 30% / 10ms criteria B 95% / 5000ms criteria B Case material plastic (UL94V-0 rated) Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU * For the 5 & 10 W models an external Varistor has to be integreated in the circuit at the converter input (in parallel). Varistor recommendation: 14S471K www.tracopower.com Page 3 of 5 TMF Series, 5 – 30 W Outline Dimensions TMF 05 xxx: Pinout Pin Single 1 AC (L) 2 AC (N) Ø 3 –Vout top view 4 +Vout Weight: 30 g (1.06 oz) TMF 10 xxx: Pinout Pin Single 1 AC (N) 2 AC (L) Ø 3 +Vout top view 4 –Vout 5 No Pin Weight: 47 g (1.66 oz) Dimensions in [mm] Tolerances: ±0.5 mm Pin tolerances: ±0.1 mm www.tracopower.com Page 4 of 5 TMF Series, 5 – 30 W Outline Dimensions (continued) TMF 20 xxx: Pinout Pin Single 1 AC (N) 2 AC (L) 3 –Vout Ø 4 +Vout top view Weight: 100 g (3.53 oz) TMF 30 xxx: Pinout Pin Single 1 AC (N) 2 AC (L) top view 3 –Vout Ø 4 No Pin 5 +Vout Weight: 135 g (4.76 oz) Dimensions in [mm] Tolerances: ±0.5 mm Pin tolerances: ±0.1 mm © Copyright 2018 Traco Electronic AG Specifications can be changed without notice! Rev. Mai 22, 2018 www.tracopower.com Page 5 of 5