TRACO POWER TMH1212D

TRACO POWER DC/DC Converters TMH SERIES 2 Watt Single In-Line Package (SIP) DC-DC Converter TMH Series, 2 Watt Measures: 0.77 x 0.40 x 0.3” Features ◆ Single-in-line package (SIP) ◆ Fully SMD-design ◆ Isolated single and dual output ◆ I/O isolation 1‘000 VDC ◆ High efficiency up to 83 % ◆ Industry standard pinout ◆ 100% burn-in (8 h) ◆ Lead free design, RoHS compliant ◆ 3-year product warranty The TMH series are ultra miniature, isolated 2 Watt DC/DC-converters in a Single- in-Line package (SIP). Requiring only 1.5 cm2 board space they offer the ideal solution in many space critical applications for board level power distribution. The use of SMD-technology makes it possible to offer a product with high performance at low cost. Models Ordercode Input voltage Output voltage Output current max. Efficiency typ. TMH 0505S 5 VDC 400 mA 76 % TMH 0512S 12 VDC 165 mA 80 % TMH 0515S 5 VDC ±10% 15 VDC 130 mA 80 % TMH 0505D ±5 VDC ±200 mA 77 % TMH 0512D ±12 VDC ±80 mA 79 % TMH 0515D ±15 VDC ±65 mA 79 % TMH 1205S 5 VDC 400 mA 78 % TMH 1212S 12 VDC 165 mA 82 % TMH 1215S 12 VDC ±10% 15 VDC 130 mA 83 % TMH 1205D ±5 VDC ±200 mA 79 % TMH 1212D ±12 VDC ±80 mA 82 % TMH 1215D ±15 VDC ±65 mA 82 % TMH 2405S 5 VDC 400 mA 77 % TMH 2412S 12 VDC 165 mA 81 % TMH 2415S 24 VDC ±10% 15 VDC 130 mA 82 % TMH 2405D ±5 VDC ±200 mA 79 % TMH 2412D ±12 VDC ±80 mA 81 % TMH 2415D ±15 VDC ±65 mA 82 % http://www.tracopower.com Page 1 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMH-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TMH SERIES DC/DC Converters 2 Watt Single In-Line Package (SIP) DC-DC Converter TMH Series 2 Watt Measures: 0.77 x 0.40 x 0.3” Input Specifications Input current no load / full load 5 Vin models 50 mA / 510 mA typ. 12 Vin models 20 mA / 200 mA typ. 24 Vin models 10 mA / 100 mA typ. Surge voltage (1 sec. max.) 5 Vin models 9 V max. 12 Vin models 18 V max. 24 Vin models 30 V max. Reverse voltage protection 0.3 A max. Reflected input ripple current can be reduced by ext. 1–3.3 µF polyester film capacitor Input filter internal capacitors Output Specifications Voltage set accuracy ±3 % Voltage balance (dual output models) 1 % max. Regulation – Input variation 1.2 % / 1 % change Vin – Load variation 20 – 100 % 10 % max. Ripple and noise (20 MHz Bandwidth) 5 Vin models 75 mV pk-pk max. 12 /24 Vin models 150 mV pk-pk max Temperature coefficient ±0.02 % / K Short circuit protection limited 1 sec. max. Capacitive load – Single output models 470 µF max. – Dual output models 390 µF max. General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +90°C max. – Storage –40°C to +125°C Derating (convection cooling) 3 %/K above +70°C Humidity (non condensing) 95 % rel H max. Derating (convection cooling) 3 %/K above +70°C Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) >2’000’000 h Isolation voltage (60sec.) Input/Output 1‘000 VDC Isolation capacitance Input/Output 80 pF typ. Isolation resistance Input/Output >1‘000 Mohm Switching frequency 80 kHz typ. (frequency modulation) Frequency change over line and load ±30 % max. Environmental compliance – Reach www.tracopower.com/products/tmh-reach.pdf – RoHS RoHS directive 2002/95/EC All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMH-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TMH SERIES DC/DC Converters 2 Watt Single In-Line Package (SIP) DC-DC Converter TMH Series 2 Watt Measures: 0.77 x 0.40 x 0.3” Physical Specifications Casing material non conductive black plastic (UL 94-V0 rated) Package weight 2.7 g (0.1oz) Soldering temperature max. +265°C / 10 sec. Outline Dimensions mm (inches) Pin-Out Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 4 –Vout –Vout 5 No pin Common 0.5 (0.02) 6 +Vout +Vout 2.3 ± 0.5 2.54 2.54 2.54 5.08 0.5 (0.02) (0.09 (0.1) (0.2) (0.1) (0.1) ± 0.02) 19.5 (0.77) Bottom view 1 2 4 5 6 0.5 (0.02) Tolerances ±0.25 (±0.01) pins ±0.05 (±0.002) Specifications can be changed any time without notice. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Rev. 03/12 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMH-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com Page 3 of 3 3.2 (0.13) 0.25 (0.01) 0.5 (0.02) 10.2 (0.4) 1.25 (0.05) 7.5 (0.3)