AC/DC Power Module TMPS 05 Series, 5 Watt ◆ PCB Power module in 1" x 1" package ◆ Certified to EN60335-1 for household appliance. ◆ No load input power <300 mW to comply with ErP directive ◆ Operating temperature range –25°C to +70°C ◆ EMI meets EN 55022 class B and EN 55014-1 ◆ Protection class II prepared ◆ 3-year product warranty CB Scheme UL 60950-1 The TMPS-05 series comprises ultra compact AC/DC power supply modules in lightweight fully encapsulated plastic casing for PCB mount. Beside the safety approvals for industrial and IT solutions, they are also certified to EN 60335-1 for household appliance. These 5 Watt modules are the ideal solution for low power or segregated circuits when space is critical or for an efficient powering of a standby mode when compliance to ErP directive is required. A peak current of 130% facilitates the activation of main circuits. Models Output Current Order code Output power max. Output Voltage Efficiency 1) max. peak TMPS 05-103 3.3 VDC 1515 mA 1970 mA 74 % Models TMPS 05-105 5.0 VDC 1000 mA 1300 mA 80 % TMPS 05-109 9.0 VDC 555 mA 721 mA 82 % TMPS 05-112 12 VDC 416 mA 540 mA 82 % 5 W TMPS 05-115 15 VDC 333 mA 433 mA 83 % TMPS 05-124 24 VDC 208 mA 270 mA 83 % TMPS 05-148 48 VDC 104 mA 135 mA 85 % 1) < 30 s with maximum duty cycle of 10%, average output power must not exceed 5 W http://www.tracopower.com Page 1 of 3 TMPS 05 Series, 5 Watt Input Specifications Input voltage ranges – AC input 85 – 264 VAC – DC Input 120 – 370 VDC Input frequency 47 – 63 Hz Input current at full load (115 VAC or 230 VAC nominal input) 110 mA typ. Inrush current (115 VAC / 230 VAC nominal input) 20 A max. / 40 A max. No-Load power consumption 300 mW max. Output Specifications Voltage set accuracy ±2 % max. Minimum load no minimum load required Ripple and noise (20 MHz bandwidth) 3.3 and 5 VDC models: 60 mVp-p max. other models: 1 % max. of nominal Vout Regulation – Input variation 1 % max. – Load variation 1 % max. Hold-up time 8 ms typ. (at 115 VAC and full load) 40 ms typ. (at 230 VAC and full load) Over voltage protection max. 190 % of nominal Vout Current limitation (operation under over-load conditions may cause damage) at 150 % typ. (autorecovery) Short circuit protection hiccup, automatic recovery Max. capacitive load 3.3 VDC model: 2200 µF 5.0 VDC model: 1000 µF 9.0 VDC model: 300 µF 12 VDC model: 160 µF 15 VDC model: 100 µF 24 VDC model: 43 µF 48 VDC model: 10 µF General Specifications Temperature ranges – Operating (20 LFM convection cooling) –25°C to +70°C – Power derating above +50°C 2.5 %/K – Storage (non operating) –40°C to +85°C Temperature coefficient 0.05 %/°C Humidity (non condensing) 95 % rel max. Switching frequency (pulse width modulation PWM) 65 kHz typ. Isolation voltage (60 sec.) – Input/Output 4‘242 VDC Isolation resistance (500 VDC) >100 MOhm Reliability /calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) 628‘000 h Electromagnetic compatibility (Conducted and radiated input suppression) EN 55011/22, class B, FCC part 15, level B (EMC), emissions EN 55014-1, Electromagnetic compatibility EN55014-2; EN55024 (EMC), immunity – Electrostatic discharge ESD IEC / EN 61000-4-2, 8 kV / 4kV, criteria A – RF field immunity IEC / EN 61000-4-3, 10 V/m, criteria A – Electrical fast transients/burst immunity IEC / EN 61000-4-4, 2 kV, criteria A – Surge IEC / EN 61000-4-5, 1 kV, criteria A – Conducted RF IEC / EN 61000-4-6, 10 Vrms, criteria A – Magnetic field immunity IEC / EN 61000-4-8, 30 A/m, criteria A – Voltage dip and interruptions IEC / EN 61000-4-11 >95 %, 250 periods, perf. criteria B 60 %, 10 periods, perf. criteria A 30 %, 25 periods, perf. criteria A All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 TMPS 05 Series, 5 Watt General Specifications (continued) Protection class II prepared according IEC/EN 60536 Safety standards IEC/EN 60950-1, UL 60950-1 EN 60335-1 Safety approvals – certification documents (pending) www.tracopower.com/overview/tmps05 Environmental compliance – Reach (pending) www.tracopower.com/products/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU Physical Specifications Casing material plastic resin + fiberglass (UL 94V-0 rated) Pin tinned copper Weight 19.7 g (0.69 oz) Outline Dimensions 25.4 (1.00) Pin-Out 2.54 5.08 Pin (0.10) (0.20) 1 AC(N) 2 AC(L) 1 2 3 NC* 4 -Vout 5 +Vout *internally not connected but keep it isolated from primary 54 3 circuit 10.16 10.16 (0.40) (0.40) 25.4 (1.00) Dimensions in[mm], () = Inches Tolerances = 0.5mm (0.01) Ø 0.6 (Ø 0.02) Pin diameter ø 0.6 mm (0.02 ± 0.004) © Copyright 2016 Traco Electronic AG Specifications can be changed without notice! Rev. Decmeber 20. 2016 Page 3 of 3 www.tracopower.com 20.3 (0.80) 2.54 (0.10) 5.08 16.3 (0.64) 25.4 (1.00) (0.20)