TRACO POWER TMR0522

TRACO POWER DC/DC Converters TMR SERIES 2 Watt Wide 2:1 Input Range Power Supply TMR 2 Series, 2 Watt Measures: 0.86 x 0.44 x 0.36” UL 60950-1 Features ◆ Wide 2:1 input voltage range ◆ Compact SIP-8 package ◆ Small footprint ◆ Full SMD design ◆ Temperature range –40° to +85°C ◆ High efficiency ◆ Excellent load and line regulation ◆ Indefinite short-circuit protection ◆ I/O isolation 1000VDC The TMR-2 series is a family of isolated 2W dc-dc converter modules with regulated output, featuring wide 2:1 input voltage ranges. The product comes in a compact ◆ Remote On/Off control SIP-8 plastic package with small footprint occupying only 2.0 cm2 (0.3 square in.) ◆ Fully RoHS compliant of board space. ◆ 3-year product warranty An excellent efficiency allows –40° to +85°C operation temperatures. Further fea- tures include remote On/Off control and continuous short circuit protection. The ultra-compact dimensions of these converters make them an ideal solution for many space critical applications in communication equipment, instrumentation and indus- trial electronics. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TMR 0510 3.3 VDC 500 mA 76 % TMR 0511 5 VDC 400 mA 80 % TMR 0512 4.5 – 9.0 VDC 12 VDC 165 mA 81 % TMR 0521 (5 VDC nominal) ±5 VDC ±200 mA 79 % TMR 0522 ±12 VDC ±85 mA 82 % TMR 0523 ±15 VDC ±65 mA 81 % TMR 1210 3.3 VDC 500 mA 77 % TMR 1211 5 VDC 400 mA 81 % TMR 1212 9 – 18 VDC 12 VDC 165 mA 83 % TMR 1221 (12 VDC nominal) ±5 VDC ±200 mA 81 % TMR 1222 ±12 VDC ±85 mA 83 % TMR 1223 ±15 VDC ±65 mA 84 % TMR 2410 3.3 VDC 500 mA 78 % TMR 2411 5 VDC 400 mA 81 % TMR 2412 18 – 36 VDC 12 VDC 165 mA 83 % TMR 2421 (24 VDC nominal) ±5 VDC ±200 mA 80 % TMR 2422 ±12 VDC ±85 mA 83 % TMR 2423 ±15 VDC ±65 mA 82 % TMR 4810 3.3 VDC 500 mA 76 % TMR 4811 5 VDC 400 mA 78 % TMR 4812 36 – 75 VDC 12 VDC 165 mA 83 % TMR 4821 (48 VDC nominal) ±5 VDC ±200 mA 80 % TMR 4822 ±12 VDC ±85 mA 81 % TMR 4823 ±15 VDC ±65 mA 81 % http://www.tracopower.com Page 1 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR-power-supply.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TMR SERIES 2 Watt Wide 2:1 Input Range Power Supply DC/DC Converters TMR 2 Series 2 Watt Measures: 0.86 x 0.44 x 0.36” Input Specifications Input current at full load (nominal input) 5 Vin models: 645 mA max. 12 Vin models: 242 mA max. 24 Vin models: 117 mA max. 48 Vin models: 62 mA max. Surge voltage (100 msec. max.) 5 Vin models: 15 V max. 12 Vin models: 36 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Input voltage variation (dv/dt) 5 V/ms, max. (complies to ETS 300 132 part. 4.4) Input Filter capacitor type Start up time 5 ms typ. (at nominal input and resistive load) ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Fast transient / surge (with external input capacitor) EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV perf. criteria A – external input capacitor Nippon chemi-con KY 220 µF, 100 V, ESR 48 mOhm Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Output Specifications Voltage set accuracy ±1 % Regulation – Input variation Vin min. to Vin max. 0.2 % max. – No load to full load single output models: ±1.0 % max. dual output models: ±1.0 % max. – Load variation 10 – 90 % single output models: ±0.5 % max. dual output models: ±0.8 % max. dual output models asymetric load: 5.0 % max. (25% / 100%) Minimum load 0 % Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max. Temperature coefficient ±0.02 %/°C Transient response (25% load step change) 500 µs typ. Short circuit protection continuous, automatic recovery Capacitive load 3.3 VDC / 5 VDC output models: 2’200 µF max. / 1’000 µF max. 12 VDC / ±5 VDC output models: 170 µF max. / ±470 µF max. ±12 VDC / ±15 VDC output models: 100 µF max. / ±47 µF max. General Specifications Temperature ranges – Operating –40°C to +85°C – Storage –55°C to +125°C Derating (convection cooling) 2 %/K above 75°C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) 4.9 Mio. h Isolation voltage (60 sec.) – Input/Output 1’600 VDC Isolation capacitance – Input/Output 200 pF max. Isolation resistance – Input/Output (500 VDC) >1‘000 MOhm Switching frequency 100 to 650 kHz (PFM) All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR-power-supply.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TMR SERIES 2 Watt Wide 2:1 Input Range Power Supply DC/DC Converters TMR 2 Series 2 Watt Measures: 0.86 x 0.44 x 0.36” General Specifications Remote On/Off – On: open or high impedance – Off: 2...4 mA input current applied via 1KW resistor – Off stand by input current max. 2.5 mA Safety standards UL/cUL 60950-1, IEC/EN 60950-1 Safety approvals – UL/cUL www.ul.com -> certifications -> File e188913 Thermal shock, mechanical shock & vibration MIL-STD-810F – Test conditions www.tracopower.com/products/mil810.pdf Environmental compliance – Reach www.tracopower.com/products/tmr2-reach.pdf – RoHS RoHS Directive 2011/65/EU Altitude – operation < 40’000ft (12’000m) – non operation < 50’000ft (15’000m) – test report www.tracopower.com/products/tmr-altitude.pdf Physical Specifications Casing material non-conductive plastic Potting material silicone (UL 94V-0-rated) Weight 4.8 g (0.17oz) Application note: www.tracopower.com/products/tmr2-application.pdf Outline Dimensions mm (inches) Bottom view 12 35 67 8 Pin-Out Pin Single Dual 0.5 (0.02) 1 –Vin (GND) –Vin (GND) 2 +Vin (Vcc) +Vin (Vcc) Remote On/Off Remote On/Off 3 5 No function No function 6 +Vout +Vout 7 –Vout Common 8 No function –Vout Dimensions in [mm], () = Inch 2.0 Pin pitch tolerances: ±0.25 (±0.01) ± 0.5 2.54 2.54 5.08 2.54 2.54 2.54 (0.2) (0.08 (0.1) (0.1) (0.1) (0.1) (0.1) Tolerances: ±0.5 (±0.02) ± 0.025) 21.8 (0.86) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. Aug. 14. 2014 www.tracopower.com Page 3 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR-power-supply.html h t t p: / / pow e r. sa ge r. c om 0.5 (0.02) 0.25 (0.01) 4.0 11.1 (0.44) 3.2 (0.16) (0.13) 9.2 (0.36)