TRACO POWER TMR1-4822

Traco Power DC/DC Converters TMR1 SERIES 1 Watt Wide 2:1 Input Range DC-DC Converter TMR 1 & TMR 1SM Series, 1 Watt Measures: 0.67 x 0.40 x 0.30” CB Scheme Features ◆ Wide 2:1 input voltage range ◆ Compact SIP-6 or SMD package ◆ Fully regulated outputs ◆ Cost optimised design ◆ No minimum load required ◆ Continuous short circuit protection ◆ Temperature range –40°C to +85°C ◆ I/O isolation 1500 VDC ◆ Remote On/Off control (SMD) The TMR-1 and TMR 1SM series are families of isolated 1 W dc-dc converter mod- ules with regulated output, featuring wide 2:1 input voltage ranges. These products ◆ 3-year product warranty come in a compact SIP-6 or SMD package with small footprint occupying only 1.2 2 cm (0.2 square inch) of board space. An excellent efficiency allows –40°C to +85°C operation temperature. Further fea- tures include remote On/Off control (SMD-Version) and continuous short circuit protection. The compact dimensions and cost optimised design make this converters an ideal solution for applications in communication equipment, instrumentation and industrial electronics. Models Order code Order code Output current Efficiency Efficiency Input voltage range Output voltage SIP-package SMD-package max. SIP typ. SMD typ. TMR 1-0511 TMR 1-0511SM 5.0 VDC 200 mA 76 % 78 % TMR 1-0512 TMR 1-0512SM 12 VDC 83 mA 77 % 79 % TMR 1-0513 TMR 1-0513SM 4.5 – 9.0 VDC 15 VDC 67 mA 79 % 81 % TMR 1-0515 (5 VDC nominal) 24 VDC 42 mA 76 % TMR 1-0522 TMR 1-0522SM ±12 VDC ±42 mA 77 % 79 % TMR 1-0523 TMR 1-0523SM ±15 VDC ±33 mA 78 % 80 % TMR 1-1211 TMR 1-1211SM 5.0 VDC 200 mA 77 % 79 % TMR 1-1212 TMR 1-1212SM 12 VDC 83 mA 77 % 79 % TMR 1-1213 TMR 1-1213SM 9.0 – 18 VDC 15 VDC 67 mA 80 % 82 % TMR 1-1215 (12 VDC nominal) 24 VDC 42 mA 77 % TMR 1-1222 TMR 1-1222SM ±12 VDC ±42 mA 79 % 81 % TMR 1-1223 TMR 1-1223SM ±15 VDC ±33 mA 78 % 80 % TMR 1-2411 TMR 1-2411SM 5.0 VDC 200 mA 77 % 79 % TMR 1-2412 TMR 1-2412SM 12 VDC 83 mA 80 % 82 % TMR 1-2413 TMR 1-2413SM 18 – 36 VDC 15 VDC 67 mA 80 % 82 % TMR 1-2415 (24 VDC nominal) 24 VDC 42 mA 77 % TMR 1-2422 TMR 1-2422SM ±12 VDC ±42 mA 80 % 82 % TMR 1-2423 TMR 1-2423SM ±15 VDC ±33 mA 80 % 82 % TMR 1-4811 TMR 1-4811SM 5.0 VDC 200 mA 77 % 79 % TMR 1-4812 TMR 1-4812SM 12 VDC 83 mA 78 % 80 % TMR 1-4813 TMR 1-4813SM 36 – 75 VDC 15 VDC 67 mA 78 % 80 % TMR 1-4815 (48 VDC nominal) 24 VDC 42 mA 76 % TMR 1-4822 TMR 1-4822SM ±12 VDC ±42 mA 79 % 81 % TMR 1-4823 TMR 1-4823SM ±15 VDC ±33 mA 79 % 81 % http://www.tracopower.com Page 1 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR1-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Traco Power TMR1 SERIES 1 Watt Wide 2:1 Input Range DC-DC Converter DC/DC Converters Measures: 0.67 x 0.40 x 0.30” TMR 1 & TRM 1SM 1 Watt Input Specifications Input current at no load (nominal input voltage) 5.0 V models: 40 mA typ. 12 V models: 20 mA typ. 24 V models: 10 mA typ. 48 V models: 7 mA typ. Surge voltage (1 sec. max.) 5.0 V models: 15 V max. 12 V models: 25 V max. 24 V models: 50 V max. 48 V models: 100 V max. Start-up voltage / under voltage lockout 5.0 V models: 4.5 VDC / 4 VDC or lower 12 V models: 9 VDC / 8.5 VDC or lower 24 V models: 18 VDC / 17 VDC or lower 48 V models: 36 VDC / 34 VDC or lower long term operation at undervoltage will damage the converter! Conducted noise (input) EN 55022 level A, FCC part 15, level A with external capacitor. see EMC consideration Recommended input fuse (slow blow) 5 V models: 500 mA 12 V models: 250 mA 24 V models: 120 mA 48 V models: 60 mA Output Specifications Voltage set accuracy ±1 % max. Regulation – Input variation Vin min. to Vin max. 0.2 % max. – No load to full load Single & Dual output models: ±1.0 % max. – Load variation 10 – 90% Single output models: ±0.5 % max. Dual output models (balanced load): ±0.8 % max. Minimum load no minimum load required Temperature coefficient 0.02 %/K Ripple and noise (20 MHz bandwidth) SMD models: 30 mVp-p max. SIP models: 50 mVp-p max. Transient response setting time (25% load step change) 250 µs typ. (PFM) Current limitation >120 % of Iout max. Short circuit protection continuous, automatic recovery Capacitive load 5 VDC models: 1‘680 µF max. 12 VDC models: 820 µF max. 15 VDC models: 680 µF max. 24 VDC models: 470 µF max. ±12 VDC models: 470 µF max. (each output) ±15 VDC models: 330 µF max. (each output) General Specifications Temperature ranges – Operating SIP models: –40°C to +85°C with no derating SMD models: –40°C to +82°C with derating – Case temperature +105°C (SIP) / +95°C (SMD) max. – Storage –55°C to +125°C Load derating SMD models: 7.2 %/K above +75°C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >2.8 Mio h All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR1-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Traco Power TMR1 SERIES 1 Watt Wide 2:1 Input Range DC-DC Converter DC/DC Converters Measures: 0.67 x 0.40 x 0.30” TMR 1 & TRM 1SM 1 Watt General Specifications Isolation voltage (60 sec.) – Input/Output 1’500 VDC Isolation capacitance – Input/Output 50 pF max. Isolation resistance – Input/Output (500 VDC) >1 GOhm Switching frequency 220 kHz (PFM) Safety standards UL 60950-1, IEC/EN 60950-1 IEC 60950-1:2005 (2nd Edition); Am 1:2009 EN 60950-1:2006+A11:2009+A1:2010+A12:2011 Safety approvals – CB test certificate (IEC 60950-1) www.tracopower.com/products/tmr1-cb.pdf Remote On/Off – On: < 0.6 VDC or open circuit (SMD models only) – Off: 2.7 to 15 VDC (ref. to –Vin) – Off standby current: 2.5 mA max. – Off control input current: 1 mA max. Physical Specifications Casing material non-conductive plastic (UL94V-0 rated) Potting material epoxy, (UL 94V-0 rated) Weight 3.1 g (0.11oz) (SIP)/3.3 g (0.12oz) (SMD) Soldering profile for SIP-package models max. 265°C / 10 sec. (wave soldering) Lead-free reflow solder process for SMD-package models as per J-STD-020D.01 (to find at: www.jedec.org - free registration required) Moisture sensivity level (for SMD-package models) level 2a as per J-STD-033B.01 (to find at: www.jedec.org - free registration required) Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU EMC Consideration Filter suggestion for to comply with EN55022 class A conducted noise emission Single output models Dual output models L1 L1 +Vin +Vout +Vin +Vout Load Com. C1 Load C1 Load -Vin -Vout -Vin -Vout C2 C2 Input models C1 C2 L1 5 VDC 4.7µF /50V, 1210 X7R 4.7µH / 1.2 A, SR0302 12 VDC 4.7µF /50V, 1210 X7R 4.7µH / 1.2 A, SR0302 24 VDC SIP 4.7µF /50V, 1210 X7R 18µH / 0.58 A, SR0302 220pF /2 kV, 1808 X7R 24 VDC SMD 4.7µF /50V, 1210 X7R 12µH / 0.75 A, SR0302 48 VDC SIP 4.7µF /100V 1210 X7R 18µH / 0.58A, SR0302 48 VDC SMD 2.2µF / 00V 1210 X7R 18µH / 0.58A, SR0302 Page 3 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR1-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Traco Power TMR1 SERIES 1 Watt Wide 2:1 Input Range DC-DC Converter DC/DC Converters Measures: 0.67 x 0.40 x 0.30” TMR 1 & TRM 1SM 1 Watt Outline Dimensions mm (inches) SIP-Package Pinout Pin single output dual output 1 –Vin (GND) –Vin (GND) +Vin (Vcc) +Vin (Vcc) 2 4 +Vout +Vout 0.5 (0.02) 5 No Pin Common 2.3 2.54 2.54 2.54 6 –Vout –Vout ±0.4 0.5 (0.02) 5.08 (0.09 (0.1) (0.2) (0.1) (0.1) ±0.02) 17.0 (0.67) Bottom view 1 2 4 5 6 0.5 (0.02) SMD-Package 18.9 [0.74] Pinout 2.54 1.8 [0.1] 12.7 [0.5] [0.1] Pin single output dual output 1 –Vin (GND) –Vin (GND) 14 9 8 2 Remote On/Off Remote On/Off 6 ntc Common 7 ntc –Vout 6 7 1 2 8 +Vout +Vout 1.00 [0.04] 9 –Vout Common 14 +Vin +Vin ntc = not to connect to electrical circuit S SEATING PLANE 1.1 [0.04] 15.0 [0.6] 0.15 S Dimensions in [mm], () = Inch Tolerances: ±0.5 (±0.02) Pin pitch tolerances: ±0.25 (±0.01) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. August 30. 2013 www.tracopower.com Page 4 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR1-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 0~ 4 0.25 [0.01] 8.45 [0.33] 13.7 [0.54] 8.7 [0.34] 17.2 [0.68] 0.25 (0.01) 0.5 (0.02) 3.2 (0.13) 2.5 11.0 (0.4) (0.10) 7.62 (0.30)