TRACO POWER TMR2-2422WI
Specifications
Manufacturer
Traco Power
Manufacturers Part #
TMR2-2422WI
Industry Aliases
TMR 2-2422WI
Brand
TRACO POWER
Series
TMR 2WI
Factory Pack Quantity
10
Application
General Purpose
Connection Type
Through Hole
Dimensions
1.02 x 0.49 x 0.36"
Efficiency
77%
Environmental Conditions
General Purpose
Industry
Datacom, Industrial, OEM/Commercial
Input Type
4:1
Input Voltage Nominal
12, 24
Isolation
1500 VDC
Mechanical Style
Isolated
Mounting
PCB Mount
Number of Outputs
2
Operating Temperature
-40 to +85°C, derate 3.3%/K above +70°C
Output Amps 1
0.09 A
Output Amps 2
0.09 A
Output Voltage V1 Nominal
12 V
Output Voltage V2 Nominal
-12 V
Power
2 W
Subcategory
DC-DC Converter
Datasheet
Extracted Text
TRACO POWER DC/DC Converters TMR2-WI SERIES 2 Watt Single In-Line Package (SIP) DC-DC Converter TMR 2WI Series, 2 Watt Measures: 1.02 x 0.49 x 0.36” Features ◆ Ultra-wide 4:1 input range ◆ SIP-9 package ◆ Full SMD design ◆ Temperature range –40 to +85°C ◆ High efficiency ◆ Excellent load and line regulation ◆ Indefinite short-circuit protection ◆ I/O isolation 1500 VDC ◆ Remote On/Off control ◆ Fully RoHS compliant ◆ 3-year product warranty The TMR-2WI series is a new family of isolated 2W dc-dc converter modules with regulated output, featuring ultra-wide 4:1 input voltage ranges of 9-36 VDC or 18-75 VDC. The product comes in a ultra-compact SIP-9 plastic package. An excellent efficiency up to 84% allows –40°C to +85°C operation temperatures at full load. Further features include remote On/Off control and continuous short circuit protection. Typical applications for these ultra-compact converters are bat- tery operated equipment and distributed power architectures in communication, instrumentation and industrial electronics, everywhere where space on the PCB is critical. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TMR 2-2410WI 3.3 VDC 500 mA 71 % 5 VDC 400 mA 76 % TMR 2-2411WI TMR 2-2412WI 12 VDC 165 mA 79 % 9 – 36 VDC TMR 2-2413WI 15 VDC 135 mA 80 % (24 VDC nominal) TMR 2-2421WI ±5 VDC ±200 mA 73 % TMR 2-2422WI ±12 VDC ±85 mA 77 % TMR 2-2423WI ±15 VDC ±65 mA 79 % TMR 2-4810WI 3.3 VDC 500 mA 70 % TMR 2-4811WI 5 VDC 400 mA 72 % TMR 2-4812WI 12 VDC 165 mA 78 % 18 – 75 VDC TMR 2-4813WI 15 VDC 135 mA 78 % (48 VDC nominal) TMR 2-4821WI ±5 VDC ±200 mA 70 % TMR 2-4822WI ±12 VDC ±85 mA 76 % TMR 2-4823WI ±15 VDC ±65 mA 76 % http://www.tracopower.com Page 1 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR2-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TMR2-WI SERIES 2 Watt Single In-Line Package (SIP) DC-DC Converter DC/DC Converters Measures: 1.02 x 0.49 x 0.36” TMR 2WI Series 2 Watt Input Specifications Input current at no load (nominal input) 24 Vin models: 20 mA typ. 48 Vin models: 15 mA typ. Input current at full load (nominal input) 24 Vin models: 110 mA typ. 48 Vin models: 55 mA typ. Surge voltage (100 msec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Reverse voltage protection 0.5 A max. Input Filter capacitor type Start up time <1ms (at nominal input and resistive load) Output Specifications Voltage set accuracy ±2 % Regulation – Input variation Vin min. to Vin max. 0.5 % max. – Load variation 25 – 100 % single output models: 0.75 % max. dual output models: 2.0 % max. (balanced load) Minimum load 25 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experianced) Temperature coefficient ±0.1 %/°C Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max Transient response (25 % load step change) 300 µs max. Short circuit protection constant current (automatic recovery) Capacitive load 3.3 VDC / 5 VDC models: 2’200 µF max. / 1’000 µF max. 12 VDC / 15VDC models: 170 µF max. / 110 µF max. ±5 VDC / ±12 VDC models: 470 µF max. / 100 µF max. (each output) ±15 VDC models: 47 µF max. (each output) General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +90°C max. – Storage –55°C to +105°C Derating (convection cooling) 3.3 %/K above 70°C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) >1 Mio h Isolation voltage (60 sec.) – Input/Output 1’500 VDC Isolation capacitance – Input/Output 500 pF max. Isolation resistance – Input/Output (500 VDC) >1‘000 M Ohm Switching frequency 100 to 650 kHz (PFM) Remote On/Off control – On: <0.6 VDC or open circuit – Off: 2.9 to 15 VDC – Off stand by input current 1 mA typ / 3 mA max. Physical Specifications Casing material non-conductive plastic Potting material epoxy (UL 94V-0 rated) Weight 6.5 g (0.23 oz) Soldering temperature max. 260°C / 10 sec. Environmental compliance – Reach www.tracopower.com/products/tmr2wi-reach.pdf – RoHS directive 2002/95/EC All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR2-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TMR2-WI SERIES 2 Watt Single In-Line Package (SIP) DC-DC Converter DC/DC Converters Measures: 1.02 x 0.49 x 0.36” TMR 2WI Series 2 Watt Application note: www.tracopower.com/products/tmr2wi-application.pdf Outline Dimensions Pin-Out Pin Single Dual 1 –Vin (GND) –Vin (GND) 2 +Vin (Vcc) +Vin (Vcc) 3 Remote On/Off Remote On/Off 6 +Vout +Vout 7 ntc Common 1.8 2 x 2.54 7.62 3 x 2.54 8 ntc ntc (0.07) (2 x 0.1) (0.3) (3 x 0.1) 9 –Vout –Vout 26.0 (1.02) (ntc = not to connect) Bottom view 12 39 67 8 Dimensions in [mm], () = Inch Pin diameter ø 0.5 ±0.05 (0.02 ±0.002) Tolerances ±0.5 (±0.02) Pin pitch tolerances ±0.2 (±0.008) 0.5 (0.02) Specifications can be changed any time without notice. Rev.07/12 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com Page 3 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR2-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 0.3 (0.012) 3.2 12 .5 2.75 (0.13) (0.49) (0.11) 9.3 (0.36)
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the TMR2-2422WI?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Manufacturers




What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods