TRACO POWER TMR3-2422WI

TRACO POWER DC/DC Converters TMR3-WI SERIES 3 Watt Single In-Line Package (SIP) DC-DC Converter TMR 3WI Series, 3 Watt Measures: 1.02 x 0.49 x 0.36” Features ◆ Highest power density in SIP package ◆ Ultra wide 4:1 input range ◆ Small footprint: 21.8 x 9.2 mm ◆ Temperature range –40° to +85°C ◆ High efficiency up to 82% ◆ Excellent load and line regulation ◆ Short-circuit protection ◆ I/O isolation 1500 VDC ◆ Remote On/Off control ◆ 3-year product warranty The TMR-3WI series is a new family of isolated 3W DC/DC converters with regu- lated output, featuring ultra-wide 4:1 input voltage range. The product comes in a ultra-compact SIP plastic package with a small footprint occupying only 2.0 cm2 (0.3 square in.) of board space. An excellent efficiency allows –40° to +85°C operation temperatures. Further features include remote On/Off control and continuous short circuit protec- tion. The very compact dimensions of these converters make them an ideal solution for many space critical applications in battery-powered equipment and instrumen- tation. Models Order code Input voltage Output voltage Output current max. Efficiency typ. TMR 3-1210WI 3.3 VDC 700 mA 74 % TMR 3-1211WI 5 VDC 600 mA 78 % TMR 3-1212WI 12 VDC 250 mA 80 % 4.5 – 18 VDC TMR 3-1213WI 15 VDC 200 mA 80 % (12 VDC nominal) TMR 3-1221WI ±5 VDC ±300 mA 80 % TMR 3-1222WI ±12 VDC ±125 mA 80 % TMR 3-1223WI ±15 VDC ±100 mA 80 % TMR 3-2410WI 3.3 VDC 700 mA 75 % TMR 3-2411WI 5 VDC 600 mA 80 % TMR 3-2412WI 12 VDC 250 mA 82 % 9 – 36 VDC TMR 3-2413WI 15 VDC 200 mA 82 % (24 VDC nominal) TMR 3-2421WI ±5 VDC ±300 mA 79 % TMR 3-2422WI ±12 VDC ±125 mA 81 % TMR 3-2423WI ±15 VDC ±100 mA 81 % TMR 3-4810WI 3.3 VDC 700 mA 74 % TMR 3-4811WI 5 VDC 600 mA 80 % TMR 3-4812WI 12 VDC 250 mA 81 % 18 – 75 VDC TMR 3-4813WI 15 VDC 200 mA 81 % (48 VDC nominal) TMR 3-4821WI ±5 VDC ±300 mA 79 % TMR 3-4822WI ±12 VDC ±125 mA 81 % TMR 3-4823WI ±15 VDC ±100 mA 81 % Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 1 of 3 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR3-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TMR3-WI SERIES 3 Watt Single In-Line Package (SIP) DC-DC Converter DC/DC Converters Measures: 1.02 x 0.49 x 0.36” TMR 3WI Series 3 Watt Input Specifications Input current at full load 12 Vin models: 340 mA max. 24 Vin models: 170 mA max. 48 Vin models: 85 mA max. Input current at no load 12 Vin models: 40 mA max. 24 Vin models: 25 mA typ. 48 Vin models: 15 mA typ. Surge voltage (100 msec. max.) 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Input filter internal capacitor ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Fast transient / Surge EN 61000-4-4, ± 2 kV, perf. criteria A EN 61000-4-5, ± 1 kV perf. criteria A With external input capacitor e.g. Nippon chemi-con KY 100 µF, 100 V, ESR 110 mOhm Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Output Specifications Voltage set accuracy ±1 % max Regulation – Input variation Vin min. to Vin max. 0.2 % max. – Load variation 0 – 100% single output models: 1.0 % max. dual output models: 1.0 % max. balanced load – Load cross regulation 25/100% 5.0 % max. (dual output models) Minimum load not required Temperature coefficient 0.02 %/K Ripple and noise (20 MHz Bandwidth) 75 mVpk-pk max. Start up time – Power On 30 ms typ. (constant resistive load) – Remote On 30 ms typ. Transient response setting time (25% load step change) 250 µs typ. Short circuit protection continuous, automatic recovery Capacitive load 3.3 VDC models: 1‘760 µF max. 5 VDC models: 1’000 µF max. 12 VDC models: 170 µF max. 15 VDC models: 110 µF max. ±5 VDC models: ±470 µF max. ±12 VDC models: ±100 µF max. ±15 VDC models: ±47 µF max. General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +100°C max. – Storage –55°C to +125°C Load derating 3.3 %/K above 70°C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >3.4 Mio h All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR3-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TMR3-WI SERIES 3 Watt Single In-Line Package (SIP) DC-DC Converter DC/DC Converters Measures: 1.02 x 0.49 x 0.36” TMR 3WI Series 3 Watt General Specifications Isolation voltage (60 sec.) – Input/Output 1’500 VDC Isolation capacitance – Input/Output 200 pF max. Isolation resistance – Input/Output (500 VDC) >1 GOhm Switching frequency 100 kHz min. (PFM) Remote On/Off – On: open or high impedance – Off: 2...4 mA to applied via 1 kOhm resistor – Off stand by input current 2.5 mA max. Vibration and thermal shock MIL-STD-810F Safety standards UL /cUL 60950-1, IEC 60950-1:2005 (2nd Edition); +A1:2009 Safety approvals – UL/cUL www.ul.com -> certifications -> File: e188913 Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS RoHS Directive 2011/65/EU Altitude – operation < 40’000ft (12’000m) – non operation < 50’000ft (15’000m) – test report www.tracopower.com/products/tmr3wi-altitude.pdf Physical Specifications Casing material non-conductive plastic Potting material silicone, UL 94V-0 rated Weight 4.8 g (0.17oz) Application note: www.tracopower.com/products/tmr3wi-application.pdf Outline Dimensions Pin-Out Bottom view Pin Single Dual 12 35 67 8 1 –Vin (GND) –Vin (GND) 2 +Vin (Vcc) +Vin (Vcc) 3 Remote On/Off Remote On/Off 0.5 (0.02) 5 No con. No con. 6 +Vout +Vout 7 –Vout Common No con. –Vout 8 Dimensions in [mm], () = Inch 2.0 2.54 2.54 2.54 2.54 2.54 5.08 Pin dimension tolerances 0.1 (0.004) (0.2) (0.1) (0.1) (0.08 (0.1) (0.1) (0.1) Pin pitch tolerances: ±0.25 (±0.01) 21.8 (0.86) Tolerances: ±0.5 (±0.02) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. July 18. 2014 www.tracopower.com Page 3 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR3-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 0.5 (0.02) 0.25 (0.01) 4.0 11.1 (0.44) 3.2 (0.16) (0.13) 9.2 (0.36)