TRACO POWER TMR3-4822

TRACO POWER DC/DC Converters TMR3 SERIES 3 Watt Single In-Line Package (SIP) DC-DC Converter TMR 3 Series, 3 Watt Measures: 0.86 x 0.44 x 0.36” UL 60950-1 Features Wide 2:1 input voltage range ◆ ◆ Fully regulated output voltage ◆ Compact SIP-8 package ◆ Models with 1’500 VDC and 3’000 VDC I/O isolation (functional insulation) ◆ Small footprint ◆ Temperature range –40° to +85°C The TMR-3 series is a new family of isolated 3W dc-dc converter modules with regulated output, featuring wide 2:1 input voltage ranges. The product comes in a ◆ High efficiency up to 85% compact SIP-8 plastic package with a small footprint occupying only 2.0 cm2 (0.3 ◆ Short-circuit protection square in.) of board space. ◆ Remote On/Off control An excellent efficiency allows –40° to +85°C operation temperatures. Further fea- tures include remote On/Off control and continuous short circuit protection. The ◆ 3-year product warranty compact dimensions of these converters make them an ideal solution for many space critical applications in communication equipment, instrumentation and indus- trial electronics. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. 1500 VDC isolation 3000 VDC isolation TMR 3-0510 TMR 3-0510HI 3.3 VDC 700 mA 75 % TMR 3-0511 TMR 3-0511HI 5 VDC 600 mA 79 % TMR 3-0512 TMR 3-0512HI 12 VDC 250 mA 81 % 4.5 – 9.0 VDC TMR 3-0513 TMR 3-0513HI 15 VDC 200 mA 82 % (5 VDC nominal) TMR 3-0521 TMR 3-0521HI ±5 VDC ±300 mA 78 % TMR 3-0522 TMR 3-0522HI ±12 VDC ±125 mA 81 % TMR 3-0523 TMR 3-0523HI ±15 VDC ±100 mA 81 % TMR 3-1210 TMR 3-1210HI 3.3 VDC 700 mA 77 % TMR 3-1211 TMR 3-1211HI 5 VDC 600 mA 81 % TMR 3-1212 TMR 3-1212HI 12 VDC 250 mA 83 % 9 – 18 VDC TMR 3-1213 TMR 3-1213HI 15 VDC 200 mA 83 % (12 VDC nominal) TMR 3-1221 TMR 3-1221HI ±5 VDC ±300 mA 82 % TMR 3-1222 TMR 3-1222HI ±12 VDC ±125 mA 83 % TMR 3-1223 TMR 3-1223HI ±15 VDC ±100 mA 83 % TMR 3-2410 TMR 3-2410HI 3.3 VDC 700 mA 76 % TMR 3-2411 TMR 3-2411HI 5 VDC 600 mA 82 % TMR 3-2412 TMR 3-2412HI 12 VDC 250 mA 83 % 18 – 36 VDC TMR 3-2413 TMR 3-2413HI 15 VDC 200 mA 84 % (24 VDC nominal) TMR 3-2421 TMR 3-2421HI ±5 VDC ±300 mA 80 % TMR 3-2422 TMR 3-2422HI ±12 VDC ±125 mA 83 % TMR 3-2423 TMR 3-2423HI ±15 VDC ±100 mA 85 % TMR 3-4810 TMR 3-4810HI 3.3 VDC 700 mA 74 % 5 VDC 600 mA 79 % TMR 3-4811 TMR 3-4811HI TMR 3-4812 TMR 3-4812HI 12 VDC 250 mA 81 % 36 – 75 VDC TMR 3-4813 TMR 3-4813HI 15 VDC 200 mA 82 % (48 VDC nominal) TMR 3-4821 TMR 3-4821HI ±5 VDC ±300 mA 79 % TMR 3-4822 TMR 3-4822HI ±12 VDC ±125 mA 82 % TMR 3-4823 TMR 3-4823HI ±15 VDC ±100 mA 83 % http://www.tracopower.com Page 1 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR3-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TMR3 SERIES 3 Watt Single In-Line Package (SIP) DC-DC Converter DC/DC Converters Measures: 0.86 x 0.44 x 0.36” TMR 3 Series 3 Watt Input Specifications Input current at full load / at no load 4.5–9 Vin models: 810 mA max. / 60 mA typ. (nominal input voltage) 9-–18 Vin models: 330 mA max. / 30 mA typ. 18–36 Vin models: 160 mA max. / 18 mA typ. 36–75 Vin models: 85 mA max. / 12 mA typ. Surge voltage (100 msec. max.) 4.5–9 Vin models: 15 V max. 9-–18 Vin models: 36 V max. 18–36 Vin models: 50 V max. 36–75 Vin models: 100 V max. Input voltage variation (dv/dt) 5 V/ms, max. (complies with ETS300 132 part 4.4) Input filter capacitor type (see application note for compliance to EN 55022 class A/B) Start up time – Power On 30 ms typ. (constant resistive load) – Remote On 30 ms typ. Output Specifications Voltage set accuracy ±1 % max Regulation – Input variation Vin min. to Vin max. 0.2 % max. – Load variation 5 – 100% single output models: 0.5 % max. dual output models: 1.0 % max. balanced load – Load variation 0 – 100% single output models: 1.0 % max. dual output models: 1.0 % max. balanced load – Load cross regulation 25/100% 5.0 % max. (dual output models) Minimum load 0 % of rated max. load Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max. Transient response setting time (25% load step change) 500 µs typ. Short circuit protection indefinite, automatic recovery Capacitive load 3.3 VDC / 5 VDC output models: 3300 µF max. / 1680 µF max. 12 VDC / 15 VDC output models: 820 µF max. / 680 µF max. ±5 VDC / ±12 VDC output models: ±1000 µF max. / ±470 µF max. ±15 VDC output models: ±330 µF max. General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +100°C max. – Storage –55°C to +105°C Load derating 3.3 %/K above 70°C Humidity (non condensing) 95 % rel. H max. Temperature coefficient ±0.02 %/K Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >4.8 Mio h Isolation voltage (60 sec.) – Input/Output 1500 VDC with suffix -HI: 3000 VDC Isolation capacitance – Input/Output 200 pF max. with suffix -HI: 40 pF max. Isolation resistance – Input/Output (500 VDC) >10 GOhm Switching frequency 100 kHz min. (PFM) Remote On/Off – On: open or high impedance – Off: 2...4 mA current applied via 1KOhm resistor – Off stand by input current 2.5 mA max. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR3-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TMR3 SERIES 3 Watt Single In-Line Package (SIP) DC-DC Converter DC/DC Converters Measures: 0.86 x 0.44 x 0.36” TMR 3 Series 3 Watt General Specifications Safety standards IEC/EN 60950-1, UL 60950-1 Safety approvals – UL/cUL www.ul.com > UL File no.: e188913 Environmental compliance – Reach www.tracopower.com/products/tmr3-reach.pdf – RoHS RoHS directive 2011/65/EU Physical Specifications Casing material non-conductive plastic Potting material silicone, (UL 94V-0 rated) Weight 4.8 g (0.17oz) Application note: www.tracopower.com/products/tmr3-application.pdf Outline Dimensions mm (inches) Pin-Out bottom view Pin Single Dual 12 35 67 8 –Vin (GND) –Vin (GND) 1 2 +Vin (Vcc) +Vin (Vcc) 0.5 (0.02) 3 Remote On/Off Remote On/Off 5* No function No function 6 +Vout +Vout 7 –Vout Common 8 No function –Vout *No pin 5 with HI version 2.0 ±0.5 2.54 2.54 5.08 2.54 2.54 2.54 (0.2) (0.1) (0.1) (0.1) (0.1) (0.1) (0.08 ±0.025) (0.86) 21.8 Dimensions in [mm], () = Inch Tolerances: ±0.5 (±0.02) Pin pich tolerances: ±0.25 (±0.01) Specifications are subject to change without notice. It is r Specifications can be changed wi esponsibility of each customer to thor thout notice! Make sure you are using the latest documentation, downloadable at www.tracopower. oughly test each product and part number under their unique parameters and environments to ensure a product will work pr com operly and reliably. Rev. July 18. 2014 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 www.tracopower.com power@sager Page 3 of 3 .com http://power.sager.com/traco-power-TMR3-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 0.5 (0.02) 0.25 (0.01) 4.0 11.1 (0.44) 3.2 (0.16) (0.13) 9.2 (0.36)