TRACO POWER TMR6-0519

Traco Power DC/DC Converters TMR6 SERIES 6 Watt Wide 2:1 Input Range Power Supply TMR 6 Series, 6 Watt Measures: 0.86 x 0.44 x 0.36” UL 60950-1 Features ◆ Highest power density in SIP package ◆ Wide 2:1 input voltage range ◆ Ultra-compact SIP-8 package ◆ Smallest footprint 6W converter ◆ Full SMD design ◆ Temperature range –40° to +65°C The TMR-6 series is a new family of isolated 6W dc-dc converter modules with regulated output, featuring wide 2:1 input voltage ranges. The product comes in a ◆ High efficiency up to 86% ultra-compact SIP-8 plastic package with a small footprint occupying only 2.0 cm2 ◆ Indefinite short-circuit protection (0.3 square in.) of board space. ◆ I/O isolation 1500 VDC An excellent efficiency allows –40° to +65°C operation temperatures. Further fea- ◆ Remote On/Off control tures include remote On/Off control and continuous short circuit protection. The very compact dimensions of these converters make them an ideal solution for many ◆ Fully RoHS compliant space critical applications in communication equipment, instrumentation and indus- ◆ 3-year product warranty trial electronics. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. TMR 6-0510 3.3 VDC 1300 mA 77 % TMR 6-0511 5 VDC 1200 mA 81 % TMR 6-0519 9 VDC 666 mA 83 % TMR 6-0512 12 VDC 500 mA 84 % 4.5 – 9.0 VDC TMR 6-0513 15 VDC 400 mA 84 % (5 VDC nominal) TMR 6-0515 24 VDC 250 mA 84 % TMR 6-0521 ±5 VDC ±600 mA 81 % TMR 6-0522 ±12 VDC ±250 mA 84 % TMR 6-0523 ±15 VDC ±200 mA 84 % TMR 6-1210 3.3 VDC 1300 mA 78 % TMR 6-1211 5 VDC 1200 mA 83 % TMR 6-1219 9 VDC 666 mA 84 % TMR 6-1212 12 VDC 500 mA 85 % 9 – 18 VDC TMR 6-1213 15 VDC 400 mA 85 % (12 VDC nominal) TMR 6-1215 24 VDC 250 mA 84 % TMR 6-1221 ±5 VDC ±600 mA 82 % TMR 6-1222 ±12 VDC ±250 mA 83 % TMR 6-1223 ±15 VDC ±200 mA 84 % TMR 6-2410 3.3 VDC 1300 mA 78 % TMR 6-2411 5 VDC 1200 mA 83 % 9 VDC 666 mA 84 % TMR 6-2419 TMR 6-2412 12 VDC 500 mA 85 % 18 – 36 VDC TMR 6-2413 15 VDC 400 mA 86 % (24 VDC nominal) TMR 6-2415 24 VDC 250 mA 85 % TMR 6-2421 ±5 VDC ±600 mA 82 % TMR 6-2422 ±12 VDC ±250 mA 84 % TMR 6-2423 ±15 VDC ±200 mA 84 % TMR 6-4810 3.3 VDC 1300 mA 78 % TMR 6-4811 5 VDC 1200 mA 82 % TMR 6-4819 9 VDC 666 mA 84 % TMR 6-4812 12 VDC 500 mA 85 % 36 – 75 VDC TMR 6-4813 15 VDC 400 mA 86 % TMR 6-4815 24 VDC 250 mA 84 % (48 VDC nominal) TMR 6-4821 ±5 VDC ±600 mA 82 % TMR 6-4822 ±12 VDC ±250 mA 84 % TMR 6-4823 ±15 VDC ±200 mA 85 % http://www.tracopower.com Page 1 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR6-power-supply.html h t t p: / / pow e r. sa ge r. c om Traco Power TMR6 SERIES 6 Watt Wide 2:1 Input Range Power Supply DC/DC Converters Measures: 0.86 x 0.44 x 0.36” TMR 6 Series 6 Watt Input Specifications Input current at no load 5 V models: 105 mA typ. (nominal input voltage) 12 V models: 55 mA typ. 24 V models: 30 mA typ. 48 V models: 15 mA typ. Surge voltage (100 msec. max.) 5 V models: 15 V max. 12 V models: 36 V max. 24 V models: 50 V max. 48 V models: 100 V max. Input filter capacitor type (application note for compliance to EN 55022 class A/B pending) Recommended input fuse 5 V models: 3.0 A (slow blow, max. rating) 12 V models: 1.6 A 24 V models: 1.0 A 48 V models: 500 mA ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Fast transient / surge (with external input capacitor) EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV perf. criteria A – external input capacitor 5 Vin models: Nippon chemi-con KY 330 µF, 50 V, ESR 55 mOhm other models: Nippon chemi-con KY 220 µF, 100 V, ESR 48 mOhm Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Output Specifications Voltage set accuracy ±1 % max Regulation – Input variation Vin min. to Vin max. 0.2 % max. – Load variation 0 – 100% single output models: 1.0 % max. dual output models: 1.0 % max. balanced load – Load cross regulation 25/100% 5.0 % max. (dual output models) Minimum load 0 % of rated max. load Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max. Transient response setting time (25% load step change) 500 µs typ. Short circuit protection indefinite, automatic recovery Start up time – Power On 30 ms typ. (constant resistive load) – Remote On 30 ms typ. Capacitive load 3.3 VDC / 5 VDC output models: 6600 µF max. / 3300 µF max. 9 VDC output models: 2000 µF max. 12 VDC / 15 VDC output models: 1600 µF max. / 1400 µF max. 24 VDC output models: 680 µF max. ±5 VDC / ±12 VDC output models: ±2000 µF max. / ± 900 µF max. ±15 VDC output models: ±660 µF max. General Specifications Temperature ranges – Operating –40°C to +65°C (without derating) – Case temperature +90°C max. – Storage –55°C to +125°C Load derating 5 %/K above 65°C Thermal shock, mechanical shock & vibration EN 61373, MIL-STD-810F – Test conditions www.tracopower.com/products/mil810.pdf Humidity (non condensing) 95 % rel. H max. Temperature coefficient ±0.02 %/K All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR6-power-supply.html h t t p: / / pow e r. sa ge r. c om Traco Power TMR6 SERIES 6 Watt Wide 2:1 Input Range Power Supply DC/DC Converters Measures: 0.86 x 0.44 x 0.36” TMR 6 Series 6 Watt General Specifications Reliability, calculated MTBF (MIL-HDBK-217F, at +70°C, ground benign) >2.1 Mio h Isolation voltage (60sec.) – Input/Output 1500 VDC Isolation capacitance – Input/Output 50 pF max. Isolation resistance – Input/Output (500 VDC) >10 GOhm Switching frequency 100 kHz min. (PFM) Remote On/Off – On: open or high impedance – Off: 2...4 mA current applied via 1KOhm resistor – Off stand by input current 2.5 mA max. Safety standards IEC/EN 60950-1, UL 60950-1 Altitude during operation 4‘000 m max. (13‘120 ft) approved Environmental compliance – Reach www.tracopower.com/products/tmr6-reach.pdf – RoHS RoHS directive 2011/65/EU Physical Specifications Casing material non-conductive plastic Potting material silicone, (UL 94V-0 rated) Weight 4.8 g (0.17oz) Application note: www.tracopower.com/products/tmr6-application.pdf Outline Dimensions Pin-Out Pin Single Dual 1 –Vin (GND) –Vin (GND) 2 +Vin (Vcc) +Vin (Vcc) 3 Remote On/Off Remote On/Off 5 No function No function 6 +Vout +Vout 2.0 2 x 2.54 5.08 3 x 2.54 7 –Vout Common (0.08) (2 x 0.1) (0.2) (3 x 0.1) 8 No function –Vout 21.8 (0.86) bottom view 12 35 67 8 Dimensions in [mm], () = Inch Tolerances: ±0.5 (±0.02) 0.5 (0.02) Pin pich tolerances: ±0.25 (±0.01) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. July 18. 2014 www.tracopower.com Page 3 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR6-power-supply.html h t t p: / / pow e r. sa ge r. c om pending pending 0.5 (0.02) 0.25 (0.01) 4.1 11.2 (0.44) 3.2 (0.16) (0.13) 9.1 (0.36)