TRACO POWER TMR6-2422WI

Traco Power DC/DC Converters TMR6-WI SERIES 6 Watt Ultra-Wide 4:1 Input Range DC-DC Converter TMR 6WI Series, 6 Watt Measures: 0.86 x 0.44 x 0.36” CB Scheme UL 60950-1 Features ◆ Highest power density in SIP package ◆ Wide 4:1 input voltage range ◆ Ultra-compact SIP-8 package ◆ Smallest footprint 6W converter ◆ Full SMD design ◆ Temperature range –40° to +71°C ◆ High efficiency up to 88% ◆ Indefinite short-circuit protection ◆ I/O isolation 1500 VDC ◆ Remote On/Off control The TMR-6WI series is a new family of isolated 6W dc-dc converter modules with ◆ Fully RoHS compliant regulated output, featuring wide 4:1 input voltage ranges. The product comes in a ◆ 3-year product warranty ultra-compact SIP-8 plastic package with a small footprint occupying only 2.0 cm2 (0.3 square in.) of board space. An excellent efficiency allows –40° to +71°C operation temperatures. Further fea- tures include remote On/Off control and continuous short circuit protection. The very compact dimensions of these converters make them an ideal solution for many space critical applications in communication equipment, instrumentation and indus- trial electronics. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. TMR 6-2410WI 3.3 VDC 1500 mA 81 % TMR 6-2411WI 5 VDC 1200 mA 84 % TMR 6-2419WI 9 VDC 666 mA 86 % TMR 6-2412WI 12 VDC 500 mA 87 % 9.0 – 36 VDC TMR 6-2413WI 15 VDC 400 mA 88 % (24 VDC nominal) TMR 6-2415WI 24 VDC 250 mA 87 % TMR 6-2421WI ±5 VDC ±600 mA 84 % TMR 6-2422WI ±12 VDC ±250 mA 87 % TMR 6-2423WI ±15 VDC ±200 mA 87 % TMR 6-4810WI 3.3 VDC 1500 mA 81 % TMR 6-4811WI 5 VDC 1200 mA 84 % TMR 6-4819WI 9 VDC 666 mA 85 % TMR 6-4812WI 12 VDC 500 mA 87 % 18 – 75 VDC TMR 6-4813WI 15 VDC 400 mA 87 % (48 VDC nominal) TMR 6-4815WI 24 VDC 250 mA 87 % TMR 6-4821WI ±5 VDC ±600 mA 84 % TMR 6-4822WI ±12 VDC ±250 mA 87 % TMR 6-4823WI ±15 VDC ±200 mA 87 % Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 1 of 3 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR6-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om pending Traco Power TMR6-WI SERIES DC/DC Converters 6 Watt Ultra-Wide 4:1 Input Range DC-DC Converter TMR 6WI Series 6 Watt Measures: 0.86 x 0.44 x 0.36” Input Specifications Input current at no load (nominal input voltage) 24 V models: 6 mA typ. 48 V models: 6 mA typ. Surge voltage (100 msec. max.) 24 V models: 50 V max. 48 V models: 100 V max. Input filter capacitor type (application note for compliance to EN 55022 class A/B pending) Recommended input fuse (normal blow, max. rating) 24 V models: 700 mA 48 V models: 315 mA ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Fast transient / surge (with external input capacitor) EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV perf. criteria A – external input capacitor 5 Vin models: Nippon chemi-con KY 330 µF, 50 V, ESR 55 mOhm other models: Nippon chemi-con KY 220 µF, 100 V, ESR 48 mOhm Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Output Specifications Voltage set accuracy ±1 % max Regulation – Input variation Vin min. to Vin max. 0.2 % max. – Load variation 0 – 100% single output models: 0.5 % max. dual output models: 1.0 % max. balanced load – Load cross regulation 25/100% 5.0 % max. (dual output models) Minimum load no minimum load required Ripple and noise (20 MHz Bandwidth) 125 mVpk-pk max. Transient response setting time (25% load step change) 250 µs typ. Short circuit protection indefinite, automatic recovery Start up time – Power On 30 ms typ. (constant resistive load) – Remote On 30 ms typ. Capacitive load 3.3 VDC output models: 4700 µF max. 5 VDC output models: 2200 µF max. 9 VDC output models: 1400 µF max. 12 VDC output models: 1100 µF max. 15 VDC output models: 1000 µF max. 24 VDC output models: 470 µF max. ±5 VDC output models: ±1400 µF max. ±12 VDC output models: ±660 µF max. ±15 VDC output models: ±470 µF max. General Specifications Temperature ranges – Operating –40°C to +71°C (without derating) – Case temperature +100°C max. – Storage –55°C to +125°C Load derating 3.45 %/K above 71°C Thermal shock, mechanical shock & vibration EN 61373, MIL-STD-810F – Test conditions www.tracopower.com/products/mil810.pdf Humidity (non condensing) 95 % rel. H max. Temperature coefficient ±0.02 %/K All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR6-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Traco Power TMR6-WI SERIES DC/DC Converters 6 Watt Ultra-Wide 4:1 Input Range DC-DC Converter TMR 6WI Series 6 Watt Measures: 0.86 x 0.44 x 0.36” General Specifications Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >2.9 Mio h Isolation voltage (60sec.) – Input/Output 1500 VDC Isolation capacitance – Input/Output 50 pF max. Isolation resistance – Input/Output (500 VDC) >1 GOhm Switching frequency 522 kHz min. (PWM) Remote On/Off – On: open or high impedance – Off: 2...4 mA current applied via 1KOhm resistor – Off stand by input current 1.0 mA typ. Safety standards IEC/EN 60950-1, UL 60950-1 Altitude during operation 4‘000 m max. (13‘120 ft) approved Environmental compliance – Reach www.tracopower.com/products/tmr6wi-reach.pdf – RoHS RoHS directive 2011/65/EU Physical Specifications Casing material non-conductive plastic Potting material silicone, (UL 94V-0 rated) Weight 4.8 g (0.17oz) Application note: www.tracopower.com/products/tmr6wi-application.pdf Outline Dimensions Pin-Out Pin Single Dual 1 –Vin (GND) –Vin (GND) 2 +Vin (Vcc) +Vin (Vcc) 3 Remote On/Off Remote On/Off 5 No function No function 6 +Vout +Vout 2.0 2 x 2.54 5.08 3 x 2.54 7 –Vout Common (0.08) (2 x 0.1) (0.2) (3 x 0.1) 8 No function –Vout 21.8 (0.86) bottom view 12 35 67 8 Dimensions in [mm], () = Inch Tolerances: ±0.5 (±0.02) 0.5 (0.02) Pin pich tolerances: ±0.25 (±0.01) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. July 18. 2014 www.tracopower.com Page 3 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMR6-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om pending 0.5 (0.02) 0.25 (0.01) 4.1 11.2 (0.44) 3.2 (0.16) (0.13) 9.1 (0.36)