TRACO POWER TMV1503SHI

DC/DC Converters TMV-HI Series, 1 Watt CB Scheme Features ◆ Ultra compact SIP-7 package ◆ Very high I/O-isolation 5‘200 VDC ◆ Dedicated for IGBT applications ◆ Operating temperature range -40°C to +95°C ◆ Industry standard pinout ◆ 3-year product warranty The TMV-HI series is a range of 1 Watt non regulated DC/DC-converters with very high I/O-isolation. They come in a very compact SIP-7 package. Models Order code Input voltage Output voltage Output current max. Efficiency typ. 3.3 VDC 303 mA 70 % TMV 0503SHI TMV 0505SHI 5.0 VDC 200 mA 70 % TMV 0509SHI 9.0 VDC 111 mA 75 % TMV 0512SHI 12 VDC 84 mA 77 % TMV 0515SHI 5 VDC ±10 % 15 VDC 66 mA 78 % TMV 0505DHI ±5.0 VDC ±100 mA 71 % TMV 0509DHI ±9.0 VDC ±56 mA 75 % TMV 0512DHI ±12 VDC ±42 mA 77 % TMV 0515DHI ±15 VDC ±33 mA 78 % TMV 05159HI +15 / –9 VDC +33 / –55 mA 76 % TMV 1203SHI 3.3 VDC 303 mA 71 % TMV 1205SHI 5.0 VDC 200 mA 71 % TMV 1209SHI 9.0 VDC 111 mA 76 % TMV 1212SHI 12 VDC 84 mA 78 % TMV 1215SHI 12 VDC ±10 % 15 VDC 66 mA 79 % TMV 1205DHI ±5.0 VDC ±100 mA 72 % TMV 1209DHI ±9.0 VDC ±56 mA 76 % TMV 1212DHI ±12 VDC ±42 mA 78 % TMV 1215DHI ±15 VDC ±33 mA 79 % TMV 12159HI +15 / –9 VDC +33 / –55 mA 77 % TMV 1503SHI 3.3 VDC 303 mA 70 % TMV 1505SHI 5.0 VDC 200 mA 70 % TMV 1509SHI 9.0 VDC 111 mA 75 % TMV 1512SHI 12 VDC 84 mA 75 % TMV 1515SHI 15 VDC ±10 % 15 VDC 66 mA 79 % TMV 1505DHI ±5.0 VDC ±100 mA 71 % TMV 1509DHI ±9.0 VDC ±56 mA 75 % TMV 1512DHI ±12 VDC ±42 mA 78 % TMV 1515DHI ±15 VDC ±33 mA 79 % TMV 15159HI +15 / –9 VDC +33 / –55 mA 76 % TMV 2403SHI 3.3 VDC 303 mA 70 % TMV 2405SHI 5.0 VDC 200 mA 70 % TMV 2409SHI 9.0 VDC 111 mA 75 % TMV 2412SHI 12 VDC 84 mA 78 % TMV 2415SHI 24 VDC ±10 % 15 VDC 66 mA 80 % TMV 2405DHI ±5.0 VDC ±100 mA 71 % TMV 2409DHI ±9.0 VDC ±56 mA 75 % TMV 2412DHI ±12 VDC ±42 mA 77 % TMV 2415DHI ±15 VDC ±33 mA 78 % TMV 24159HI +15 / –9 VDC +33 / –55 mA 75 % http://www.tracopower.com Page 1 of 3 DC/DC Converters TMV-HI Series 1 Watt Input Specifications Input current no load 5 Vin models: 35 mA typ. 12 Vin models: 17 mA typ. 15 Vin models: 16 mA typ. 24 Vin models: 12 mA typ. Surge voltage (1 s max.) 5 Vin models: 9 V max. 12 Vin models: 18 V max. 15 Vin models: 20 V max. 24 Vin models: 30 V max. Input filter internal capacitor Internal power dissipation 450 mW max. Recommended input fuse (slow blow) 5 Vin models: 500 mA 12 Vin models: 200 mA 15 Vin models: 150 mA 24 Vin models: 100 mA Output Specifications Voltage set accuracy ±5 % max. Voltage balance (dual output models, balanced loads) 0.1% typ. / 1 % max. Regulation – Input variation (1 % change Vin) 1.2 % typ. – Load variation (20 – 100 %) 3.3 VDC models: <20 % 5 VDC models: <15 % other models: <10 % Ripple and noise (20 MHz Bandwidth) 100 mVp-p max. Temperature coefficient ±0.01 %/K typ. / ±0.02 %/K max. Short circuit protection continuous, automatic recovery Capacitive load –Single output 3.3 VDC models: 1000 µF max. 5.0 & 9.0 VDC models: 470 µF max. 12 & 15 VDC models: 220 µF max. –Dual output ±5.0 & ±9.0 VDC models: 220 µF max. (each output) ±12 & ±15 VDC models: 100 µF max. (each output) +15 / –9 VDC models: 100 / 220 µF max. Isolation /Safety Isolation voltage – Isolation test voltage (tested for 1 s) 5‘700 Vpk – I/O isolation voltage (60 s) 5’200 VDC Isolation capacitance (input/output) 7 pF typ. Isolation resistance (input/output) >10 Gohm Common mode transient immunity (dv/dt) 15 kV/µs min. General Specifications Temperature ranges – Operating (natural convection) –40°C to +95°C – Case temperature +100°C max. Power derating 6.7 %/K above +85°C Humidity (non condensing) 95 % rel H max. Altitude during operation 4000 m Switching frequency 100 kHz typ. (frequency modulation) Safety standards CAN/CSA-C22.2 No 60950-1-07, 2nd ed; A1:2011 ANSI/UL No. 60950-1, 2nd ed.; A1:2011 IEC 60950-1:2005 (2nd edition); Am 1:2009 EN 60950-1:2006/A11:2009/A1:2010/A12:2011 – Certification documents www.tracopower.com/overview/tmv-hi Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TMV-HI Series 1 Watt Physical Specifications Casing material non-conducting FR4 (UL 94V-0 rated) Package weight 2.4 g (0.084 oz) Soldering temperature max. 260°C / 10 s Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) >2’000’000 h Outline Dimensions Pin-Out Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 5 –Vout –Vout 6 No pin Common 7 +Vout +Vout 0.5 (0.02) 2.3 2.54 2.54 2.54 ±0.4 0.5 (0.02) 7.62 (0.3) (0.09 (0.1) (0.1) (0.1) ±0.02) 19.5 (0.77) Bottom view Dimensions in [mm], () = Inch 1 2 5 6 7 Tolerances ±0.25 (±0.01) pins ±0.05 (±0.002) 0.5 (0.02) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. December 20. 2017 www.tracopower.com Page 3 of 3 (0.01) 0.25 0.5 (0.02) 1.55 (0.06) 3.2 (0.13) 10.2 (0.4) 7.5 (0.30)