TRACO POWER TMV2405D

TRACO POWER DC/DC Converters TMV SERIES 1 Watt Single In-Line Package (SIP) Power Supply TMV Series, 1 Watt Measures: 0.77 x 0.40 x 0.28” Features ◆ Single-in-line (SIL) package ◆ Isolated single and dual output models ◆ I/O isolation 3‘000 VDC ◆ High Efficiency up to 81% ◆ Extended temperature range –40°C to +85°C ◆ Pin-compatible with other manufacturers ◆ 100% Burn-in (8 h) ◆ Lead free design, RoHS compliant ◆ 3-year product warranty The TMV series are miniature, isolated 1 W DC/DC-converters with high isolation in a Single-in-Line package (SIP). Requiring only 1.2 cm2 board space they offer the ideal solution in many space critical applications for board level power distri- bution. The use of SMD-technology makes it possible to offer a product with high performance at low cost. Models Ordercode Input voltage Output voltage Output current max. Efficiency typ. TMV 0505S 5 VDC 200 mA 71 % TMV 0509S 9 VDC 110 mA 76 % TMV 0512S 12 VDC 80 mA 78 % TMV 0515S 5 VDC ±10% 15 VDC 65 mA 78 % TMV 0505D ± 5 VDC ±100 mA 72 % ±12 VDC ± 40 mA 78 % TMV 0512D TMV 0515D ±15 VDC ± 30 mA 79 % TMV 1205S 5 VDC 200 mA 73 % TMV 1212S 12 VDC 80 mA 80 % TMV 1215S 15 VDC 65 mA 80 % 12 VDC ±10% TMV 1205D ± 5 VDC ±100 mA 74 % TMV 1212D ±12 VDC ± 40 mA 81 % TMV 1215D ±15 VDC ± 30 mA 81 % TMV 2405S 5 VDC 200 mA 71 % TMV 2412S 12 VDC 80 mA 78 % TMV 2415S 15 VDC 65 mA 79 % 24 VDC ±10% TMV 2405D ± 5 VDC ±100 mA 72 % TMV 2412D ±12 VDC ± 40 mA 79 % TMV 2415D ±15 VDC ± 30 mA 80 % http://www.tracopower.com Page 1 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMV-power-supply.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TMV SERIES 1 Watt Single In-Line Package (SIP) Power Supply DC/DC Converters Measures: 0.77 x 0.40 x 0.28” TMV Series 1 Watt Input Specifications Input current no load /full load 5 Vin models 30 mA / 260 mA typ. 12 Vin models 12 mA / 110 mA typ. 24 Vin models 7 mA / 50 mA typ. Surge voltage (1 sec. max.) 5 Vin models 9 V max. 12 Vin models 18 V max. 24 Vin models 30 V max. Reverse voltage protection 0.3 A max. Reflected input ripple current* can be reduced by ext. 1–3.3 µF polyester film capacitor Input filter internal capacitor Output Specifications Voltage set accuracy ± 3 % Voltage balance (dual output models) ± 1 % max. Regulation – Input variation ± 1.2 % / 1 % change Vin – Load variation 20 – 100 % ± 10 % max. Ripple and noise (20 MHz Bandwidth) 100 mV pk-pk max. Temperature coefficient ± 0.02 % / K Short circuit protection limited 1 sec. max. Capacitive load single output models: 680 µF max. dual output models: 220 µF max. General Specifications Temperature ranges – Operating –40 °C ... +85 °C – Case temperature +95 °C max. – Storage –40 °C ... +105 °C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) >2’000’000 h Isolation voltage Input/Output 3‘000 VDC Isolation capacitance Input/Output 60 pF typ. Isolation resistance Input/Output >10‘000 M Ohm Switching frequency 100 kHz typ. (Frequency modulation) Frequency change over line and load ± 30 % max. Environmental compliance – Reach www.tracopower.com/overview/tmv – RoHS RoHS directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMV-power-supply.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TMV SERIES 1 Watt Single In-Line Package (SIP) Power Supply DC/DC Converters Measures: 0.77 x 0.40 x 0.28” TMV Series 1 Watt Physical Specifications Casing material non conductive plastic (UL 94V-0 rated) Package weight – Single output models 2.1 g (0.07 oz) – Dual output models 2.6 g (0.09 oz) Soldering temperature max. 265°C / 10 sec. Outline Dimensions mm (inches) Pin-Out Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) –Vout –Vout 5 0.5 6 No pin Common (0.02) 7 +Vout +Vout 2.3 ±0.4 2.54 2.54 2.54 0.5 (0.02) 7.62 (0.3) (0.1) (0.09 (0.1) (0.1) ±0.02) 19.5 (0.77) Bottom view 1 2 5 6 7 0.5 (0.02) Dimensions in [mm], () = Inch Tolerances: ±0.25 (±0.01) Pins: ±0.05 (±0.002) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. March 24. 2015 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. www.tracopower.com Page 3 of 3 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TMV-power-supply.html h t t p: / / pow e r. sa ge r. c om 0.25 (0.01) 0.5 (0.02) 4.75 (0.19) 3.2 (0.13) 1.25 10.2 (0.4) (0.05) 5.75 (0.23) 6.1 (0.24) 7.1 (0.28) 24 V Models