TRACO POWER TON15-4810

TRACO POWER DC/DC Converters TON15 SERIES 15 Watt Surface Mount DC-DC Converter TON 15 Series, 15 Watt Measures: 1.10 x 0.94 x 0.335” CB Features Scheme UL 60950-1 ◆ Ultra compact 15W converter ◆ Cost efficient open frame design with industry standard pin-out ◆ Surface-mount (SM) and through-hole version ◆ I/O isolation voltage 2250V, rated for basic insulation ◆ Extended operating temperature range –40°C to +85°C ◆ Remote On/Off ◆ Under voltage lockout ◆ Lead free design, RoHS compliant ◆ 3-years product warranty The TON-15 series is a new generation of high performance 15W dc-dc convert- ers with wide input voltage range and precisely regulated output voltage. The ultra compact open frame design with industry standard pin-out provides the designer now a 50% smaller, cost efficient alternative to existing 10 to 15W converters in the market. Built-in filters for both input and output minimize the need for external filtering. Further features include remote On/Off, output voltage trimming, over voltage protection and short circuit protection. Typical applications are distributed power systems, instrumentation and industrial electronics, everywhere where space on the PCB is a critical factor. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. TON 15-2410 3.3 VDC 3‘500 mA 86 % TON 15-2411 18 – 36 VDC 5.0 VDC 3‘000 mA 87 % TON 15-2412 (nominal 24 VDC) 12 VDC 1‘250 mA 87 % TON 15-2413 15 VDC 1’000 mA 88 % TON 15-4810 3.3 VDC 3‘500 mA 85 % TON 15-4811 36 – 75 VDC 5.0 VDC 3‘000 mA 87 % (nominal 48 VDC) 12 VDC 1‘250 mA 87 % TON 15-4812 TON 15-4813 15 VDC 1’000 mA 88 % Add suffix SM for surface mount version Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power http:/.sager /www.com/traco-power .tracopower.com -TON15-dc-dc-converter.html Page 1 of 3 h t t p: / / pow e r. sa ge r. c om TRACO POWER TON15 SERIES DC/DC Converters 15 Watt Surface Mount DC-DC Converter TON 15 Series 15 Watt Measures: 1.10 x 0.94 x 0.335” Input Specifications Input current at no load 24 V; 3.3/5 Vout models: 20 mA typ 24 V; 12/15 Vout models: 15 mA typ. 48 V; 3.3/5 Vout models: 15 mA typ 48 V; 12/15 Vout models: 10 mA typ. Input current at full load 24 V; 3.3 Vout models: 590 mA typ. 24 V; other output models: 750 mA typ. 48 V; 3.3 Vout models: 300 mA typ. 48 V; other output models: 380 mA typ. Input voltage variation (dv/dt) 5 V/ms, max. (complies with ETS 300 132 part. 4.4) Start-up voltage / under voltage lockout 24 V models: 17 VDC / 14.5 VDC 48 V models: 33 VDC / 30.5 VDC Surge voltage (100 msec. max.) 24 V models: 50 V max. 48 V models: 100 V max. Input filter capacitor type (see application note for compliance to EN 55022 class A/B) Radiated immunity EN 61000-4-3 10 V/m, perf. criteriy A Fast transient / surge EN 61000-4-4, ±2 kV, perf. criteria B EN 61000-4-5, ±1 kV perf. criteria A with external input capacitor e.g. Nippon chemi-con KY 220 µF, 100 V, ESR 48 mOhm Conducted immunity EN 61000-4-6, 3 Vrms, perf. criteria A Reflected ripple current 30 mAp-p typ. Output Specifications Voltage set accuracy ±1 % Output voltage adjustment ±10 % (see application note) Regulation – Input variation Vin min. to Vin max 0.2 % max. – Load variation 0 – 100 % 0.2 % max. Minimum load 0 % of rated max. load Temperature coefficient ±0.02 %/K Ripple and noise (20 MHz Bandwidth) 3.3 & 5.0 Vout models: 75 mVpk-pk typ (measured with 1 µF M/C and 10 µF TC) 12 & 15 Vout models: 100 mVpk-pk typ Start up time – Power On 30 ms typ. (constant resistive load) – Remote On 30 ms typ. Transient response setting time (25% load step chang) 300 µs typ. Short circuit protection indefinite (automatic recovery) Over load protection at 150 % of Iout max., foldback Over voltage protection 3.3 Vout models: 3.7 – 5.4 Vout 5 Vout models: 5.6 – 7.0 Vout 12 Vout models: 13.5 – 19.8 Vout 15 Vout models: 16.8 – 20.5 Vout Capacitive load 3.3 & 5.0 Vout models: 1’000 µF max. 12 Vout models: 330 µF max. 15 Vout models: 220 µF max. Application note: www.tracopower.com/products/ton15-application.pdf All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TON15-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TON15 SERIES DC/DC Converters 15 Watt Surface Mount DC-DC Converter TON 15 Series 15 Watt Measures: 1.10 x 0.94 x 0.335” General Specifications Temperature ranges – Operating –40°C to +85°C (with derating) – Storage –55°C to +125°C Derating 6.7 %/K above 75°C Humidity (non condensing) 5 % to 95 % rel H Thermal shock acc. MIL-STD-810F Vibration acc. MIL-STD-810F Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >3.4 Mio. h Isolation voltage (60 sec.) – Input / Output 2‘250 VDC (complies with basic insulation rating per EN 60950-1) Isolation resistance – Input / Output >10 M Ohm Isolation capacitance – Input / Output 1000 pF max. Switching frequency 3.3 / 5 Vout models: 270 kHz typ. (Pulse width modulation PWM) 12 / 15 Vout models: 470 kHz typ. Remote On/Off – On: 3.0 to 15 VDC or open circuit. – Off: 0 to 1.2 VDC or short circuit pin 6 and pin 2 – Off idle current: 2.5 mA max. negative remote On/Off logic on demand Safety standards UL 60950-1, EN 60950-1, IEC 60950-1 Safety approvals – UL/cUL www.ul.com -> certifications -> File e188913 Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU Physical Specifications Weight 10.5 g (0.36oz) Soldering profile for trough hole version max. 265°C / 10 sec. (wave soldering) Lead-free reflow solder process for SMD-package models as per J-STD-020D.01 (to find at: www.jedec.org - free registration required) Washing procedure www.tracopower.com/products/ton15-clean.pdf Outline Dimensions SMD version (SM) thru hole version (TH) Pin-Out 7.62 5.08 (0.3) (0.2) Pin Single A-A 1 +Vin (Vcc) 6 2 1 2 –Vin (GND) 3 +Vout Bottom view 4 Trim 5 4 3 5 –Vout 10.16 (0.4)10.16 (0.4) 8.5 6 Remote On/Off 8.5 5.2 (0.20) (0.335) (0.335) 23.88 (0.94) Dimensions in [mm], () = Inch Section A-A Tolerances: ±0.5 (±0.02) 0.5max. Pin pitch tolerances: ±0.25 (±0.01) (0.02) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. July 25. 2014 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. www.tracopower.com Page 3 of 3 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TON15-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 1.3max. (0.05) 0.8 (0.031) 20.32 (0.80) 3.81 (0.15) 27.94 (1.10)