AC/DC Power Supplies TOP 60 Series, 60 Watt CB Scheme Features ◆ 60 W power supply in 2.0”x 4.0“ footprint ◆ Single-, dual- and triple output models ◆ Highest efficiency of 88% typ. ◆ Operating temperature range –10°C to +70°C ◆ EMI filter meets EN 55022, level B ◆ Compliance with EN 61000-3-2 ◆ 3-year product warranty The new TOP-60 series AC/DC open frame power supplies with Industry standard 2.0” x 4.0” (50.8 x 101.6 mm) footprint feature single-, dual- and triple output models with up to 60 Watt continuous output power. The high efficiency alouds an operation up to 70°C with convection cooling. Compliance with global safety and EMC standards qualify these power supplies for industrial and IT applications. Models 1) 1) Order Code Output Power Output 1 Output 2 Output 3 nominal TOP 60105 55 W 5.0 VDC / 11.0 A TOP 60112 60 W 12 VDC / 5.0 A TOP 60115 64 W 15 VDC / 4.3 A TOP 60124 64 W 24 VDC / 2.7 A TOP 60148 64 W 48 VDC / 1.35 A 1) TOP 60252 55 W +5.0 VDC / 6.0 A (8.0 A) +12 VDC / 3.0 A 1) TOP 60254 55 W +5.0 VDC / 6.0 A (8.0 A) +24 VDC / 1.5 A 1) 55 W +5.0 VDC / 6.0 A (8.0 A) +12 VDC / 3.0 A –12 VDC / 0.5 A TOP 60522 1) TOP 60533 55 W +5.0 VDC / 6.0 A (8.0 A) +15 VDC / 2.4 A –15 VDC / 0.5 A 1) TOP 60316 38 W +3.3 VDC / 6.0 A (8.0 A) +5.2 VDC / 3.0 A +12 VDC / 0.5 A 1) TOP 60317 38 W +5.0 VDC / 6.0 A (8.0 A) +3.3 VDC / 1.5 A +12 VDC / 0.5 A 1) TOP 60318 55 W +5.0 VDC / 6.0 A (8.0 A) +24 VDC / 1.5 A –12 VDC / 0.5 A 1) Peak current for max. 10 sec. or with forced air cooling Total power should not exceed nominal power http://www.tracopower.com Page 1 of 3 AC/DC Power Supplies TOP-60 Series 60 Watt Input Specifications Input voltage – nominal 100 – 240 VAC (universal input) – AC input range 90 – 264 VAC (with derating at low input) – DC input range 110 – 370 VDC (max. 40 W output power at input below 120 VDC) Input frequency 47 – 63 Hz Harmonic limits EN 61000-3-2, class A Earth leakage current 150 µA max. @264 VAC, 63 Hz Inrush current – 115 VAC 30 A typ. (< 2ms, cold start at 25°C) – 230 VAC 60 A typ. Input protection T3.15 A internal fuses (line and neutral) Recommended circuit breaker 5 A (characteristic C or slow blow fuse) Output Specifications Voltage set accuracy single output models: 2 % max. multi output models, output 1: 3 % max. multi output models, other outputs: 5 % max. Regulation – Input 0.5 % max. – Load variation single output models: 2 % max. multi output models, output 1: 3 % max. multi output models, other outputs: 5 % max. Minimum load (to meet regulation specs) multi output models, output 1: 0.5 A multi output models, output 2: 0.1 A (not required for single output models and output 3 of multi output models) Ripple and noise (20Mhz Bandwidth) 3.3 & 5 VDC models: <100 mVp-p other models: 1 % Vout Overvoltage protection (output 1 only) at 110 % – 135 % of Vout nominal Short circuit protection foldback (automatic recovery) Capacitive load TOP 60105/60112/60115/60124/60148 models: 3300/2200/1500/470/0 µF max. TOP 60252/60254 models: 2200/82 µF max. TOP 60522/60316/60317/60533/60318 models: 1500/5600/1200/470/330 µF max. Transient response (25 % load step change) 500 µs typ. Hold-up time – Vin = 110 VAC 12 ms typ. – Vin = 230 VAC 15 ms typ. General Specifications Temperature ranges – Operating –10°C to +70°C – Storage (non-operating) –40°C to +85°C Power derating 2.5 %/K above +50°C Humidity (non condensing) 0 – 95 % rel. H max. Efficiency 80 – 88 % 75 % for TOP 60316 & TOP 60317 Switching frequency 62 kHz typ. (pulse width modulation) Altitude during operation up to 3‘000 m (10‘000 ft) approved Start-up time – Vin = 115 VAC <3.5s – Vin = 230 VAC <2s Electromagnetic compatibility – Electrostatic discharge ESD EN 61000-4-2 ±8 kV / ±6 kV – RF field susceptibility EN 61000-4-3 3 V/m – Electrical fast transient / burst immunity input EN 61000-4-4 ±2 kV – Electrical fast transient / burst immunity output EN 61000-4-4 ±2 kV – Surge immunity line – neutral ground EN 61000-4-5, ±2 kV – Surge immunity output EN 61000-4-5 ±1 kV – Immunity to conducted RF disturbances EN 61000-4-6 3 Vrms – Magnetic field immunity EN 61000-4-8 3 A/m – Mains voltage dips and interruptions EN 61000-4-11 30 % 500 ms, 60 % 100 ms, >95 % 10 ms http://www.tracopower.com Page 2 of 3 AC/DC Power Supplies TOP-60 Series 60 Watt General Specifications Electromagnetic compatibility– Conducted input RI suppression EN 55022 class B, FCC Part 15 class B (EMC), Emissions – Harmonic current emissions IEC/EN 61000-3-2, class A & D Isolation voltage – Input / Output 4000 VAC – Input / Field Ground 1500 VAC – Output / Field Ground 500 VAC Reliability /calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >400’000 h Safety standards – Information technology equipment IEC/EN 60950-1 Safety approvals – CB certificate (IEC 60950-1) www.tracopower.com/products/top60-cb.pdf – TÜV certificate (UL 60950-1) www.tracopower.com/products/top60-tuv.pdf Environment – Vibration acc. IEC 60068-2-6; 3 axis, sine sweep, 10-55Hz, 1g, 1oct/min – Shock acc. IEC 60068-2-27 3 axis, 15g half sine, 11msShock 20 G (3 directions each 3 times) Connection pin connector (Molex) Weight 205 g (7.23 oz) Dimensions Input J1 4.0 (101.6) 3.75 (95.3) Pin 1 AC in J1 2 AC in AC IN 1 J2 1 J1: Molex Series 41791 OUT mates with Molex crimp terminal: 08-52-0072 and terminal housing: 09-50-3031 PE 6 FG Output J2 Pin Single output Dual output Triple output 1 +Vout 1 Vout 1 Vout 1 2 +Vout 1 Vout 1 Vout 1 Pillars (not included) for connection to protective earth (PE) 3 –Vout 1 com. com. Height: 0.2 min. (5.0), Diam.: 0.25 max. (6.0) 4 –Vout 1 com. com. To comply with EN 55022 class B: Field ground (FG) and protective earth (PE) 5 no con. no con. Vout 3 are to be connected to chassis 6 no con. Vout 2 Vout 2 J2: Molex Series 41791 Dimensions in Inch, () = mm mates with Molex crimp terminal: 08-52-0072 and terminal housing: 09-50-3061 Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. January 13. 2015 www.tracopower.com Page 3 of 3 0.09(2.3) 1.75 (44.5) 1.18(30.0) 2.0 (50.8)