TRACO POWER TOS06-05SIL

DC/DC Converters TOS Series, Point-of-Load (POL) Converter Features  Small size, low profile  SMT package or SIP version  Cost-efficient open frame design  Wide input voltage ranges  Output voltages trim from 0.75 VDC to 5.5 VDC  Delivers up to 30 A with minimal derating  Ultra high efficiency to 96 %  Fast transient response The TOS series is a range of high performance non-isolated dc-dc converters With very high efficiency that can supply up to 30A of output current. These modules  Remote On/Off control provide precisely regulated output voltages which can be set via an external resistor  Wide temperature range –40°C to +85°C to a value from 0.75 VDC to 5.5 VDC. These converters work over a wide input voltage range of 2.4 to 5.5 VDC or 8.3 to 14.0 VDC.Further features include remote  SMT package fully DOSA compatible On/Off, under voltage lockout, over temperature and over current protection.  Lead free design – RoHS compliant These products have an open-frame construction with very small footprint and are available in an industry standard SIP or in a SMT package. The TOS series is fully RoHS compliant and can withstand industry standard handling, cleaning and the high temperatures of lead-free reflow solder processes. Models Order code Input voltage Output voltage Output current max. Efficiency typ. SMT-version range range TOS 06-05SM 6 A 94 % 3) TOS 10-05SM 2.4 – 5.5 VDC 0.75 – 3.3 VDC 10 A 95 % 16 A 95 % TOS 16-05SM TOS 06-12SM 6 A 89 % TOS 10-12SM 8.3 – 14.0 VDC 0.75 – 5.0 VDC 10 A 93 % TOS 16-12SM 16 A 92 % SIL-version TOS 06-05SIL 6 A 94 % 2) TOS 10-05SIL 2.4 – 5.5 VDC 0.75 – 3.3 VDC 10 A 95 % TOS 16-05SIL 16 A 95 % TOS 06-12SIL 6 A 89 % TOS 10-12SIL 8.3 – 14 VDC 0.75 – 5.0 VDC 10 A 93 % TOS 16-12SIL 16 A 92 % Models Datasheet for 30A Models see: www.tracopower.com/products/tos30.pdf 1) Order code Input voltage Output voltage Output current max. Efficiency typ. SMT-version range range 0.80 – 3.6 VDC 30 A 93 % TOS 30-05SM 4.5 – 5.5 VDC 4) TOS 30-12SM 6.0 – 14.0 VDC 0.80 – 3.6 VDC 30 A 92 % SIL-version TOS 30-05SIL 4.5 – 5.5 VDC 0.80 – 5.5 VDC 30 A 93 % 2) TOS 30-12SIL 6.0 – 14.0 VDC 0.80 – 5.5 VDC 30 A 92 % 1) No stocking item, availability may be subject to MOQ 2) 25 A output voltage higher than 2.75 VDC 3) Max output voltage to be adjusted min. 0.5 VDC below impressed input voltage 4) 20 A output voltage higher than 2.75 VDC http://www.tracopower.com Page 1 of 4 DC/DC Converters TOS Series, POL Converter Input Specifications Input current no load – Vin 5 VDC (at Vout min./Vout max.) 6 A models: 20 mA / 45 mA typ. 10 A / 16 A models: 100 mA / 130 mA typ. – Vin 12 VDC (at Vout min./Vout max.) 6 A models: 17 mA / 100 mA typ. 10 A models: 40 mA / 100 mA typ. 16 A models: 40 mA / 100 mA typ. Stand by input current (at remote Off) 6 A models: 1 mA typ. 10 A / 16 A models: 2 mA typ. Max. input current – Vin 5 VDC 6 A models: 6 A 10 A models: 10 A 16 A models: 16 A – Vin 12 VDC 6 A models: 4.5 A 10 A models: 7 A 16 A models: 10 A Start up voltage / under voltage lockout 5 Vin models: 2.2 VDC / 2.0 VDC typ. 12 Vin models: 7.9 VDC / 7.8 VDC typ. Start up time (power / remote On till Vout set) 8 ms typ. Reflected ripple current – Vin 5 VDC 6 A models: 35 mAp-p typ. (with input filter) 10 A / 16 A models: 100 mAp-p typ. – Vin 12 VDC 6 A models: 30 mAp-p typ. 10 A models: 20 mAp-p typ. 16 A models: 30 mAp-p typ. Input filter external (recommended) 2 x 150 µF low ESR polymer capacitors and 2 x 47 µF ceramic capacitors Output Specifications Voltage set accuracy ±2 % max. (see page 3 for set up) Voltage balance (dual output models) ±1 % max. Regulation – Input variation ±0.3 % max. – Load variation 0 – 100 % ±0.4 % max. Dynamic load response – 50 % load change (upper half) with external 1 µF ceramic- and 10 µF tantalum capacitors max. peak variation / response time Vin 5 VDC, 6 A models: 130 mV / 25 µs typ. Vin 12 VDC, 6 A models: 200 mV / 25 µs typ. Vin 5 VDC, 10 A models: 200 mV / 25 µs typ. Vin 12 VDC, 10 A models: 200 mV / 25 µs typ. Vin 5 VDC, 16 A models: 300 mV / 25 µs typ. Vin 12 VDC, 16 A models: 200 mV / 25 µs typ. – 50 % load change (upper half) with external 2 x 150 µF polymer capacitors Vin 5 VDC, 6 A models: 50 mV / 50 µs typ. Vin 12 VDC, 6 A models: 50 mV / 50 µs typ. Vin 5 VDC, 10 A models: 100 mV / 100 µs typ. Vin 12 VDC, 10 A models: 100 mV / 25 µs typ. Vin 5 VDC, 16 A models: 150 mV / 100 µs typ. Vin 12 VDC, 16 A models: 100 mV / 50 µs typ. Ripple and noise (20 MHz Bandwidth) 5 Vin models: 50 mVp-p max. 12 Vin models: 50 mVp-p max. Temperature coefficient ±0.4 % typ. Over current protection at +200 % of Iout max. typ. Short circuit protection indefinite, automatic recovery Capacitive load – ESR <1 mOhm 1000 µF max. – ESR <10 mOhm 6 A models: 3000 µF max. 10 A / 16 A models: 5000 µF max. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 DC/DC Converters TOS Series, POL Converter General Specifications Temperature ranges – Operating –40°C to +85°C – Storage –55°C to +125°C Derating see application note Over temperature protection at +125°C typ. Humidity (non condensing) 5 – 95 % rel H max. Reliability, calculated MTBF 6 A models: > 9 mio. h (MIL-HDBK-217F at +25°C, ground begin) 10 A / 16 A models: > 3.3 mio. h Switching frequency 300 kHz typ. (pulse width modulation - PWM) Remote On/Off On: 1 VDC to Vin max. or open circuit. (reference to GND) Off: 0 to 0.3 VDC Physical Specifications Weight 6 A models: 2.8 g 10 A / 16 A models: 6.0 g Soldering profile – SIL - Version max. 265°C / 10 sec. (wave soldering) – SMT - Version peak temp. 245°C for 10 sec. max., 217°C for 90 sec. max. (Convection reflow solder process is recommended) Moisture Sensitivity Level – SMT - Version 2a Application note: www.tracopower.com/products/tos-application.pdf Output Voltage Adjustment Vo (+Vout) 21070 5 VDC input models: Rd [Ohm] = – 5110 Vo – 0.7525 Prog Load 10570 12 VDC input models: Rd [Ohm] = – 1000 Vo – 0.7525 Rd GND All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 DC/DC Converters TOS Series, POL Converter Outline Dimensions mm (inches) Single-in-Line (SIL-Version) 6 A output Models 6.65 22.9 (0.90) (0.26) 1.28 0.51 0.64 (0.05) (0.02) 2.54 (0.1) (0.025) 0.70 15.24 (0.6) (0.028) 17.78 (0.7) 20.32 (0.8) 10A & 16A output models 8.28 50.8 (2.00) (0.33) 1.28 0.51 0.64 (0.05) (0.02) (0.025) 1.18 5 x 2.54 (5 x 0.10) 25.4 (1.0) 4 x 2.54 (4 x 0.10) (0.046) Surface Mount (SMT-Version) 6 A output Models 4.06 4.06 4.57 (0.16) (0.16) (0.18) GND Trim Vout Bottom View On/Off Vin 2.29 1.3 1.57 (0.09) (0.05) (0.062) 17.52 (0.69) 5.97 20.3 (0.8) (0.24) 10A & 16A output models 4.83 4.83 4.83 7.54 (0.19) (0.19) (0.19) (0.30) GND Vout Trim Sens Bottom View On/Off Vin 1.57 2.84 1.3 (0.062) (0.112) (0.05) 29.9 (1.18) 8.28 33.0 (1.3) (0.33) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. September 28. 2016 www.tracopower.com Page 4 of 4 3.29 (0.13) 3.24 (0.128) 10.2 (0.40) 1.57 1.57 (0.062) (0.062) 12.7 (0.50) 10.92 (0.43) 8.9 (0.35) On/Off Vin On/Off Trim Vin Vin GND GND Trim Vout 8.64 (0.34) 1.5 (0.06) 11.4 (0.45) 1.9 10.29 (0.41) (0.075) 13.5 (0.53) GND Vout Sens Vout Vout