AC/DC Medical Power Supply TPP 40 Series, 40 Watt • Enclosed power supply with screw terminal connection • Certification according to IEC/EN/ES 60601-1 3rd edition for 2xMOPP • Low leakage current <75 µA rated for BF applications • Risk management process according to ISO 14971 including risk management file • Acceptance criteria for electronic assem- blies according to IPC-A-610 Level 3 • EMC emission to IEC 60601-1-2 ed.4 CB Scheme prepared • Protection class l and ll ES 60601-1 • Approved for operation up to 5000 m MSL • Ready to meet ErP directive, < 0.15 W no load power consumption The TPP 40 Series of 40 Watt AC/DC power supplies feature a reinforced dou- • 5 year product warranty ble I/O isolation system according to latest medical safety standards IEC/EN ES 60601-1 3rd edition for 2 x MOPP up to 5000 m MSL. The earth leakage current is below 75 µA what makes the units suitable for BF (body floating) applications. Open frame version with pin connection The excellent efficiency of up to 92% allows a high power density for the stan- see TPP 40A Series dard 2.44” x 3.0” packaging format. The full load operating temperature range is –40°C to +70°C while it goes up to 85°C with 50% load derating. The EMC www.tracopower.com/overview/tpp40a characteristic complies to IEC 60601-1-2 ed.4 and is dedicated for applications in industrial and domestic fields. High reliability is provided by use of industrial quality grade components and an excellent thermal management. It makes the products an ideal solution for medical devices and for demanding safety and space critical applications. Models Order code Output voltage Output current max. Efficiency max. Models Vout 1 Vout 2 Vout 3 Vout 1 Vout 2 Vout 3 TPP 40-105 5 VDC 8.0 A 90 % TPP 40-112 12 VDC 3.34 A 92 % TPP 40-115 15 VDC 2.67 A 92 % TPP 40-124 24 VDC 1.67 A 92 % TPP 40-221 +12 VDC +5 VDC 3.34 A 4 A 89 % TPP 40-231 +15 VDC +5 VDC 2.67 A 4 A 88.5 % TPP 40-251 +24 VDC +5 VDC 1.67 A 4 A 86 % TPP 40-321M2 +12 VDC +5 VDC –12 VDC 3.34 A 4 A 0.5 A 88 % TPP 40-331M3 +15 VDC +5 VDC –15 VDC 2.67 A 4 A 0.5 A 88 % TPP 40-3512 +24 VDC +5 VDC +12 VDC 1.67 A 4 A 0.5 A 86 % Note: - Vout 1 is ajustable by ±10% with internal potentiomet - Multi output models have a common ground (not isolated) - Total power should not exceed 40 Watt for continuose operation - Other output voltages are available on request www.tracopower.com Page 1 of 5 TPP 40 Series, 40 Watt Input Specifications Input voltage range – AC range (universal input) 85 – 264 VAC – DC range 120 – 370 VDC Input frequency 47 – 63 Hz Input current at full load – at 115 VAC / 230 VAC 1.05 A max. / 0.55 A max. Input protection T3.15 A/250 VAC (internal fuse in both line & neutral) Input inrush current – at 230 VAC 60 A max. Zero load power consumption 0.15 W max. (acc. ErP directive) Output Specifications Voltage set accuracy single output: ±1% multi output: ±1% Vout1 ±2% Vout2, Vout3 Regulation - single output – Input variation 0.2% max. – Load variation (0 - 100%) 5 VDC model: 0.7% max. other models: 0.5% max. Regulation - multi output – Input variation 0.2% max. – Load variation (0 - 100%) Vout1: 0.5% max. Vout2: 1.5% max. (0.1W to full load: 0.7% max.) Vout3: 0.7% max. – cross regulation (25% / 100%) 1.5% max. Minimum load not required (Vout 3 requires 0.5 W over Vout 1/Vout 2 to be stabilized) Temperature coefficient 0.02%/K Hold-up time – Vin = 115 VAC 25 ms typ. Start-up time <1s Rise time 20 ms typ. Ripple and noise - single output model 5-15 VDC outputs: 75 mVp-p typ. w. cap. 10µF/25V 1206 X7R MLCC (20MHz Bandwidth) 24 VDC output: 75 mVp-p typ. w. cap. 1µF/50V 1206 X7R MLCC - multi output Vout 1 12 VDC: 120 mVp-p typ. w. cap. 1µF/50V 1206 X7R MLCC 15 VDC: 150 mVp-p typ. w. cap. 1µF/50V 1206 X7R MLCC 24 VDC 240 mVp-p typ. w. cap. 1µF/50V 1206 X7R MLCC – Vout 2 5 VDC: 100 mVp-p typ. w. cap. 10µF/25V 1206 X7R MLCC – Vout 3 (-)12 VDC: 120 mVp-p typ. w. cap. 10µF/25V 1206 X7R MLCC 15 VDC: 150 mVp-p typ. w. cap. 10µF/25V 1206 X7R MLCC Overvoltage protection 125 – 140% of nominal Vout Current limitation single output: at 145% Iout typ. multi output: at 145% Pout1 +Pout2 Short circuit protection hiccup mode (automatic recovery) Transiente response – Peak deviation Vout1: 3% max. (25% load step change) – Recovery time 600 µs typ. Capactive load 5 VDC output model: 16‘000 µF max. 12 VDC output model: 2‚785 µF max. 15 VDC output model: 1‘780 µF max. 24 VDC output model: 700 µF max. +12 VDC / +5 VDC output model: 1‘750 µF / 2’000 µF max. +15 VDC / +5 VDC output model: 1‘670 µF / 2’000 µF max. +24 VDC / +5 VDC output model: 440 µF / 2’000 µF max. +12 VDC / +5 VDC / -12 VDC output model: 1‘750 µF / 2’000 µF / 420 µF max. +15 VDC / + 5 VDC / -15 VDC output model: 1‘670µF / 2’000 µF / 420 µF max. +24 VDC / +5 VDC / -12 VDC output model: 440 µF / 2’000 µF / 420 µF max. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 2 of 5 TPP 40 Series, 40 Watt General Specifications Operating temperature –40°C to +85°C with derating, see graph on p.4 Output power derating – Temperature single output: 2.67 %/K above +70°C at 230 VAC 2.75 %/K above +65°C at 115 VAC multi output: 1.60 %/K above +60°C at 230 VAC 1.67 %/K above +55°C at 115 VAC – Low input voltage 1.33 %/V below 100 VAC Storage temperature –40°C to +85°C Humidity (non condensing) 5 – 95 % rel. H max. Altitude during operation 5000 m Switching frequency - single output 5 VDC model: 70 kHz typ. (pulse frequency modulation) (at 230 VAC) other models: 120 kHz typ. (pulse frequency modulation) Switching frequency - multi output – Vout 1 5 VDC model: 70 kHz typ. (pulse frequency modulation) (at 230 VAC) other models: 115 kHz typ. (pulse frequency modulation) – Vout 2 750 kHz typ. (pulse frequency modulation) – Vout 3 510 kHz typ. (pulse frequency modulation) Isolation voltage – Input / Output (60 s) 4000 VAC (2 x MOPP insulation) – Input / Case (60 s) 2500 VAC Leakage current (at 264 VAC/60Hz) 75 µA max. Isolation resistance (at 500 VDC) 100 MOhm min. Reliability – calculated MTBF at +25°C acc. to IEC 61709 3‘000‘000 h for single output models 1‘700‘000 h for multi output models Protection class class II prepared Electromagnetic compatibility – Conducted & Radiated input surpression EN 55011 limits to IEC 60601-1-2 4th editon (EMC), emissions EN 55032 class B (internal filter) – Harmonic current emissions IEC / EN 61000-3-2, class B – Voltage flicker IEC / EN 61000-3-3, class B Electromagnets compatibility (EMC), immunity IEC / EN 60601-1-2 – Electrostatic discharge ESD IEC / EN 61000-4-2, 8kV/6kV perf. criteria A – RF field immunity IEC / EN 61000-4-3, 20V/m perf. criteria A – Electrical fast transients/burst immunity IEC / EN 61000-4-4, ± 2kV perf. criteria A – Surge IEC / EN 61000-4-5, ± 1kV/± 2kV perf. criteria A – Conducted RF IEC / EN 61000-4-6, 20 Vrms perf. criteria A – Magnetic field (only for single output models) IEC / EN 61000-4-8, 10A/m perf. criteria A Voltage dip and interruptions according to EN 60601-1-2 30%, 500ms perf. criteria A reference: 100 VAC / 50Hz 60%, 100ms perf. criteria B > 95%, 10ms perf. criteria A > 95%, 5000ms perf. criteria B Safety standards and certification IEC/EN 60601-1 3rd edition, ANSI/AAMI ES60601-1:2005(R)2012 – Certification documents www.tracopower.com/overview/tpp40 Environment – Vibration acc. IEC 60068-2-6 3 axis, sine sweep, 10–55Hz, 1g, 1oct/min – Shock acc. IEC 60068-2-27 3 axis, 10g half sine, 11msShock 20 G (3 directions each 3 times) Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU Connection screw terminal All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 3 of 5 TPP 40 Series, 40 Watt Derating graphs Single output models: Multi output models: Power derating depending on temperature (for horizontal mounting) Power derating depending on temperature (for horizontal mounting) 100 100 80 80 60 60 40 40 20 20 115 VAC 115 VAC 230 VAC 230 VAC 0 0 -25 020406080 -25 020406080 Ambient Temperature [°C] Ambient Temperature [°C] All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 4 of 5 Output Power [%] Output Power [%] TPP 40 Series, 40 Watt Outline Dimensions Single output enclosed: Screw Terminal Input Output Pin Single Pin* Dual 1 1,2 Line –Vout 3 3,4 Neutral +Vout *Terminal rated for 10 A max. Weight: 169 g (5.96 oz) (at higher current connection has to be split) Multi output enclosed: Screw Terminal Input Output Pin Single Pin* Dual 1 1 Line Vout 3 3 2,3 Neutral Com Weight: 216 g (7.80 oz) 4,5 Vout 2 6 Vout 1 Dimensions in inch, () = mm Tolerances: x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) *Terminal rated for 10 A max. Wire dimensions range 26 - 16 AWG (at higher current connection has to be split) M3×0.5 screw locked torque MAX 5Kgf.cm/0.49N.m Terminal screw locked torque MAX 2Kgf.cm/0.2N.m © Copyright 2018 Traco Electronic AG Specifications can be changed without notice! Rev. June 05. 2018 Page 5 of 5 www.tracopower.com