AC/DC Medical Power Supply TPP 65 Series, 65 Watt • Enclosed power supply with screw terminal connection • Certification according to IEC/EN/ES 60601-1 3rd edition for 2xMOPP • Low leakage current <75 µA rated for BF applications • Risk management process according to ISO 14971 including risk management file • Acceptance criteria for electronic assem blies according to IPC-A-610 Level 3 • EMC emission to IEC 60601-1-2-ed.4 CB Scheme prepared ES 60601-1 • Protection class l and ll • Operating up to 5000 m altitude The TPP 65 Series of 65 Watt AC/DC power supplies feature a reinforced dou- • Ready to meet ErP directive, < 0.15 W ble I/O isolation system according to latest medical safety standards (60601-1 no load power consumption 3rd edition, 2 x MOPP). The earth leakage current is below 75 µA what makes the units suitable for BF (body floating) applications. • 5 year product warranty The excellent efficiency of up to 92% allows a high power density for the stan- dard 2.44” x 3.0” packaging format. The full load operating temperature range Open frame version with pin connection is –40°C to +60°C while it goes up to 85°C with 50% load derating (for single see TPP 65A Series output models). The EMC characteristic is dedicated for applications in industrial and domestic fields. High reliability is provided by use of industrial quality grade components and an excellent thermal management. It makes the products an ideal solution for medi- cal devices and for demanding safety and space critical applications. www.tracopower.com/overview/tpp65a Models 2 Order code Output voltage Output current max. * Efficiency max. 1 Vout 1 * Vout 2 Vout 3 Iout 1 Iout 2 Iout 3 TPP 65-105 5 VDC 10.0 A 90 % TPP 65-112 12 VDC 5.42 A 92.5 % TPP 65-115 15 VDC 4.34 A 93.5 % TPP 65-124 24 VDC 2.71 A 93.5 % TPP 65-221 +12 VDC +5 VDC 5.42 A 8 A 90 % TPP 65-231 +15 VDC +5 VDC 4.34 A 8 A 90.5 % TPP 65-251 +24 VDC +5 VDC 2.71 A 8 A 89 % TPP 65-321M2 +12 VDC +5 VDC –12 VDC 5.42 A 8 A 0.6 A 89 % TPP 65-331M3 +15 VDC +5 VDC –15 VDC 4.34 A 8 A 0.6 A 89.5 % TPP 65-3512 +24 VDC +5 VDC +12 VDC 2.71 A 8 A 0.6 A 88.5 % 1 Note: * Vout 1 is ajustable by ±10% with internal potentiomet 2 * Total power should not exceed 65 Watt for continuose operation - Multi output models have a common ground (not isolated) - Other output voltages are available on request www.tracopower.com Page 1 of 4 TPP 65 Series, 65 Watt Input Specifications Input voltage range – AC range (universal input) 85 – 264 VAC – DC range 120 – 370 VDC Input frequency 47 – 63 Hz Input current at full load – at 115 VAC / 230 VAC 1.65 A max. / 0.95 A max. Input protection T3.15 A/250 VAC (internal fuse in both line & neutral) Input inrush current – at 230 VAC 60 A max. Zero load power consumption 0.15 W max. (acc. ErP directive) Output Specifications Voltage set accuracy single output: ±1% multi output: ±1% Vout1 ±2% Vout2, Vout3 Regulation - single output – Input variation 0.2% max. – Load variation (0 - 100%) 5 VDC model: 0.7% max. other models: 0.5% max. Regulation - multi output – Input variation 0.2% max. – Load variation (0 - 100%) Vout1: 0.5% max. Vout2: 1.5% max. (0.1W to full load: 0.7% max.) Vout3: 0.7% max. – Cross regulation (25% / 100%) 1.5% max. Minimum load not required (Vout 3 requires 0.5 W on Vout 1/Vout 2 to be stabilized) Temperature coefficient 0.02 %/K max. Hold-up time – Vin = 115 VAC 16 ms typ. Start-up time <1 s Rise time 20 ms typ. Ripple and noise - Single output models 5-15 VDC models: 75 mVp-p typ. w. cap. 10µF/25V 1206 X7R MLCC (20 MHz bandwidth) 24 VDC model: 75 mVp-p typ. w. cap. 1µF/50V 1206 X7R MLCC - Multi output models Vout 1: 12 VDC 120 mVp-p typ. w. cap. 1µF/50V 1206 X7R MLCC Vout 1: 15 VDC 150 mVp-p typ. w. cap. 1µF/50V 1206 X7R MLCC Vout 1: 24 VDC 240 mVp-p typ. w. cap. 1µF/50V 1206 X7R MLCC Vout 2: 5 VDC: 100 mVp-p typ. w. cap. 10µF/25V 1206 X7R MLCC Vout 3: (+/-)12 VDC: 120 mVp-p typ. w. cap. 10µF/25V 1206 X7R MLCC Vout 3: -15 VDC: 150 mVp-p typ. w. cap. 10µF/25V 1206 X7R MLCC Overvoltage protection 125 – 140% of nominal Vout Overload protection by current limit single output models: at 145% Iout typ. multi output models: at 145% Pout1 + Pout2 Short circuit protection hiccup mode (automatic recovery) Transiente response – Peak deviation Vout1: 3% max. (25% load step change) – Recovery time 600 µs typ. Capacitive load – Single output 5 VDC model: 20‘000 µF max. 12 VDC model: 4520 µF max. 15 VDC model: 2895 µF max. 24 VDC model: 1130 µF max. – Dual output +12 / +5 VDC model: 2500 µF / 3000 µF max. +15 / +5 VDC model: 1600 µF / 3000 µF max. +24 / +5 VDC model: 625 µF / 3000 µF max. – Tripple output +12 / +5 / -12 VDC model: 2500 µF / 3000 µF / 500 µF max. +15 / +5 / -15 VDC model: 1600 µF / 3000 µF / 400 µF max. +24 / +5 / +12 VDC model: 625 µF / 3000 µF / 500 µF max. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 2 of 4 TPP 65 Series, 65 Watt General Specifications Operating temperature –40°C to +85°C with derating Output power derating – Temperature single output: 2 %/K above +60°C at 230 VAC 2 %/K above +55°C at 115 VAC multi output: 1.67 %/K above +55°C at 230 VAC 1.71 %/K above +50°C at 115 VAC – Low input voltage 1.33 %/V below 100 VAC Storage temperature –40°C to +85°C Humidity (non condensing) 5 – 95 % rel. H max. Altitude during operation 5000 m max. Switching frequency - single output 5 VDC model: 60 kHz typ. (pulse frequency modulation) (at 230 VAC) other models: 120 kHz typ. (pulse frequency modulation) Switching frequency - multi output – Vout 1 115 kHz typ. (pulse frequency modulation) (at 230 VAC) – Vout 2 750 kHz typ. (pulse frequency modulation) – Vout 3 510 kHz typ. (pulse frequency modulation) Isolation voltage – Input / Output (60 s) 4000 VAC (2 x MOPP insulation) – Input / Case (60 s) 2500 VAC Leakage current (at 264 VAC/60Hz) 75 µA max. Isolation resistance (at 500 VDC) 100 MOhm min. Reliability – calculated MTBF at +25°C acc. to IEC 61709 1‘500‘000 h for single output models 1‘000‘000 h for multi output models Protection class class II prepared Electromagnetic compatibility – Conducted & Radiated input surpression EN 55011 limits to IEC 60601-1-2 4th editon (EMC), emissions EN 55032 class B (internal filter) – Harmonic current emissions IEC / EN 61000-3-2, class B – Voltage flicker IEC / EN 61000-3-3, class B Electromagnets compatibility (EMC), immunity IEC / EN 60601-1-2 – Electrostatic discharge ESD IEC / EN 61000-4-2, 8kV/15kV perf. criteria A – RF field immunity IEC / EN 61000-4-3, 20V/m perf. criteria A – Electrical fast transients/burst immunity IEC / EN 61000-4-4, ± 2kV perf. criteria A – Surge IEC / EN 61000-4-5, ± 1kV/± 2kV perf. criteria A – Conducted RF IEC / EN 61000-4-6, 20 Vrms perf. criteria A – Magnetic field (only for single output models) IEC / EN 61000-4-8, 10A/m perf. criteria A Voltage dip and interruptions according to EN 60601-1-2 30%, 500ms perf. criteria A reference: 100 VAC / 50Hz 60%, 100ms perf. criteria B > 95%, 10ms perf. criteria A > 95%, 5000ms perf. criteria B Safety standards and certification IEC/EN 60601-1 3rd edition, ANSI/AAMI ES60601-1:2005(R)2012 www.ul.com file e188913 – Certification documents www.tracopower.com/overview/tpp65 Environment – Vibration acc. IEC 60068-2-6 3 axis, sine sweep, 10–55Hz, 1g, 1oct/min – Shock acc. IEC 60068-2-27 3 axis, 10g half sine, 11msShock 20 G (3 directions each 3 times) Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU Connection screw terminal / pin connector All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 3 of 4 TPP 65 Series, 65 Watt Outline Dimensions Single output: Screw Terminal Input Output Pin Single Pin* Dual 1 1,2 Line –Vout 3 3,4 Neutral +Vout Weight: 172g (6.07 oz) *Terminal rated for 10 A max. (at higher current connection has to be split) Multi output: Screw Terminal Input Output Pin Single Pin* Dual Triple 1 1 Line nc Vout 3 3 2,3 Neutral Com Com Weight: 221g (7.90 oz) 4,5 Vout 2 Vout 2 6 Vout 1 Vout 1 Dimensions in inch, () = mm Tolerances: x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) *Terminal rated for 10 A max. Wire dimensions range 26 - 16 AWG (at higher current connection has to be split) M3×0.5 screw locked torque MAX 5Kgf.cm/0.49N.m Terminal screw locked torque MAX 2Kgf.cm/0.2N.m © Copyright 2018 Traco Electronic AG Specifications can be changed without notice! Rev. Mai 1. 2018 Page 4 of 4 www.tracopower.com