TRACO POWER TSC5097-DD

DC/DC Converter TSC Series, 40 to 2500 Watt Features ◆ Plug-in modules for 19”-subracks (3U and 6U height) ◆ Available DC-input voltage ranges 18–36, 36–75, 80–160 and 160–320VDC ◆ Also models with AC-input (see page 6) ◆ Standard output voltages: 5–250VDC up to 200A ◆ EMI compliance with EN 55022 class A ◆ Safety compliance to IEC/EN 60950 ◆ Many options available, i.e. powerfail signals, ext. On/Off, redundant operation, wall mounting 3U Models ◆ Customized version available on request ◆ 3-year product warranty The TSC series is a range high quality DC/DC converter qualified for demanding ap- plications in industrial automation and telecom systems. The modular design allows very high flexibility of input/output configuration and application specific options at very reasonable cost even for low quantities. All models are constructed as rugged plug-in module for 19”-subrack (Euro cassette) with wall mounting as option. 6U Models http://www.tracopower.com Page 1 of 13 DC/DC Converter TSC Series 40 – 2500 Watt Models 3U Height Modules 6U Height Modules Order Code Output current Order Code Output current Output voltage Input voltage max. max. (adjust.range) range * TSC 2020 8 A TSC 1220 25 A * TSC 3020 20 A TSC 1320 45 A * TSC 5020 30 A TSC 1520 60 A 5 VDC * TSC 0620 50 A TSC 3520 95 A (4.5 – 5.5 VDC) * TSC 6020 70 A TSC 3720 135 A TSC 2620 85 A TSC 3620 190 A TSC 2022 4 A TSC 1222 12.5 A TSC 3022 12 A TSC 1322 25 A TSC 5022 16 A TSC 1522 33 A 12 VDC TSC 0622 24 A TSC 3522 50 A (11 – 13 VDC) TSC 6022 35 A TSC 3722 70 A TSC 2622 50 A TSC 3622 100 A TSC 2024 2.4 A TSC 1224 6 A TSC 3024 6 A TSC 1324 13 A TSC 5024 8 A TSC 1524 18 A 24 VDC TSC 0624 12 A TSC 3524 27 A (23 – 26 VDC) TSC 6024 18 A TSC 3724 40 A TSC 2624 25 A TSC 3624 55 A TSC 3824 75 A 18 – 36 VDC TSC 2029 1 A TSC 1229 3 A TSC 3029 2.7 A TSC 1329 6 A TSC 5029 4 A TSC 1529 8 A 48 VDC TSC 0629 6 A TSC 3529 12 A (45 – 55 VDC) TSC 6029 9 A TSC 3729 19 A TSC 2629 12 A TSC 3629 26 A TSC 3829 38 A TSC 2027 0.5 A TSC 1227 1.2 A TSC 3027 1.2 A TSC 1327 2.5 A TSC 5027 1.8 A TSC 1527 3.3 A 110 VDC TSC 0627 2.5 A TSC 3527 5.3 A (100 – 130 VDC) TSC 6027 3.5 A TSC 3727 8 A TSC 2627 5 A TSC 3627 11 A TSC 3827 15 A TSC 2028 0.25 A TSC 1228 0.6 A TSC 3028 0.6 A TSC 1328 1.25 A TSC 5028 0.9 A TSC 1528 1.6 A 220 VDC TSC 0628 1.25 A TSC 3528 2.8 A (200 – 250 VDC) TSC 6028 1.8 A TSC 3728 4 A TSC 2628 2.5 A TSC 3628 5.5 A TSC 3828 8 A Height: 1U = 44.45 mm (1.75) Other output voltages on request All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 13 DC/DC Converter TSC Series 40 – 2500 Watt o Models 3U Height Modules 6U Height Modules Order Code Output current Order Code Output current Output voltage Input voltage max. max. (adjust.range) range TSC 2030 8 A TSC 1230 30 A TSC 3030 20 A TSC 1330 50 A TSC 5030 35 A TSC 1530 80 A 5 VDC TSC 0630 50 A TSC 3530 100 A (4.5 – 5.5 VDC) TSC 6030 80 A TSC 3730 150 A TSC 2630 100 A TSC 3630* 200 A TSC 2032 4 A TSC 1232 15 A TSC 3032 12 A TSC 1332 30 A TSC 5032 20 A TSC 1532 42 A 12 VDC TSC 0632 26 A TSC 3532 56 A (11 – 13 VDC) TSC 6032 40 A TSC 3732 85 A TSC 2632 60 A TSC 3632 115 A TSC 2034 2.4 A TSC 1234 7.5 A TSC 3034 6 A TSC 1334 15 A TSC 5034 10 A TSC 1534 23 A 24 VDC TSC 0634 14 A TSC 3534 30 A (23 – 26 VDC) TSC 6034 20 A TSC 3734 50 A TSC 2634 30 A TSC 3634 65 A TSC 3834 100 A 36 – 75 VDC TSC 2039 1 A TSC 1239 3.6 A TSC 3039 2.7 A TSC 1339 7.3 A TSC 5039 4.5 A TSC 1539 11 A 48 VDC TSC 0639 6.5 A TSC 3539 14 A (45 – 55 VDC) TSC 6039 9 A TSC 3739 23 A TSC 2639 15 A TSC 3639 30 A TSC 3839 45 A TSC 2037 0.5 A TSC 1237 1.5 A TSC 3037 1.2 A TSC 1337 3 A TSC 5037 2 A TSC 1537 4.5 A 110 VDC TSC 0637 3 A TSC 3537 6.5 A (100 – 130 VDC) TSC 6037 4 A TSC 3737 10 A TSC 2637 6.5 A TSC 3637 14 A TSC 3837 20 A TSC 2038 0.25 A TSC 1238 0.8 A TSC 3038 0.6 A TSC 1338 1.5 A TSC 5038 1 A TSC 1538 2.4 A 220 VDC TSC 0638 1.5 A TSC 3538 3.5 A (200 – 250 VDC) TSC 6038 2 A TSC 3738 5 A TSC 2638 3.2 A TSC 3638 7 A TSC 3838 10 A *Wall mounting version Height: 1U = 44.45 mm (1.75) Other output voltages on request All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 13 DC/DC Converter TSC Series 40 – 2500 Watt o Models 3U Height Modules 6U Height Modules Order Code Output current Order Code Output current Output voltage Input voltage max. max. (adjust.range) range TSC 2050 8 A TSC 1250 30 A TSC 3050 20 A TSC 1350 50 A TSC 5050 35 A TSC 1550 80 A 5 VDC TSC 0650 50 A TSC 3550 110 A (4.5 – 5.5 VDC) TSC 6050 80 A TSC 3750 165 A TSC 2650 100 A TSC 3650 220 A TSC 2052 4 A TSC 1252 15 A TSC 3052 12 A TSC 1352 30 A TSC 5052 20 A TSC 1552 42 A 12 VDC TSC 0652 26 A TSC 3552 56 A (11 – 13 VDC) TSC 6052 40 A TSC 3752 85 A TSC 2652 60 A TSC 3652 115 A TSC 2054 2.4 A TSC 1254 7.5 A TSC 3054 6 A TSC 1354 15 A TSC 5054 10 A TSC 1554 23 A 24 VDC TSC 0654 14 A TSC 3554 30 A (23 – 26 VDC) TSC 6054 20 A TSC 3754 50 A TSC 2654 30 A TSC 3654 65 A TSC 3854 100 A 80 – 160 VDC TSC 2059 1 A TSC 1259 3.6 A TSC 3059 2.7 A TSC 1359 7.3 A TSC 5059 4.5 A TSC 1559 11 A 48 VDC TSC 0659 6.5 A TSC 3559 14 A (45 – 55 VDC) TSC 6059 9 A TSC 3759 23 A TSC 2659 15 A TSC 3659 30 A TSC 3859 45 A TSC 2057 0.5 A TSC 1257 1.5 A TSC 3057 1.2 A TSC 1357 3 A TSC 5057 2 A TSC 1557 4.5 A 110 VDC TSC 0657 3 A TSC 3557 6.5 A (100 – 130 VDC) TSC 6057 4 A TSC 3757 10 A TSC 2657 6.5 A TSC 3657 14 A TSC 3857 20 A TSC 2058 0.25 A TSC 1258 0.8 A TSC 3058 0.6 A TSC 1358 1.5 A TSC 5058 1 A TSC 1558 2.4 A 220 VDC TSC 0658 1.5 A TSC 3558 3.5 A (200 – 250 VDC) TSC 6058 2 A TSC 3758 5 A TSC 2658 3.2 A TSC 3658 7 A TSC 3858 10 A Height: 1U = 44.45 mm (1.75) Other output voltages on request All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 4 of 13 DC/DC Converter TSC Series 40 – 2500 Watt o Models 3U Height Modules 6U Height Modules Order Code Output current Order Code Output current Output voltage Input voltage max. max. (adjust.range) range TSC 2070 8 A TSC 1270 30 A TSC 3070 20 A TSC 1370 50 A TSC 5070 35 A TSC 1570 80 A 5 VDC TSC 0670 50 A TSC 3570 110 A (4.5 – 5.5 VDC) TSC 6070 80 A TSC 3770 165 A TSC 2670 100 A TSC 3670 220 A TSC 2072 4 A TSC 1272 15 A TSC 3072 12 A TSC 1372 30 A TSC 5072 20 A TSC 1572 42 A 12 VDC TSC 0672 26 A TSC 3572 56 A (11 – 13 VDC) TSC 6072 40 A TSC 3772 85 A TSC 2672 60 A TSC 3672 115 A TSC 2074 2.4 A TSC 1274 7.5 A TSC 3074 6 A TSC 1374 15 A TSC 5074 10 A TSC 1574 23 A 24 VDC TSC 0674 14 A TSC 3574 30 A (23 – 26 VDC) TSC 6074 20 A TSC 3774 50 A TSC 2674 30 A TSC 3674 65 A TSC 3874 100 A 160 – 320 VDC TSC 2079 1 A TSC 1279 3.6 A TSC 3079 2.7 A TSC 1379 7.3 A TSC 5079 4.5 A TSC 1579 11 A 48 VDC TSC 0679 6.5 A TSC 3579 14 A (45 – 55 VDC) TSC 6079 9 A TSC 3779 23 A TSC 2679 15 A TSC 3679 30 A TSC 3879 45 A TSC 2077 0.5 A TSC 1277 1.5 A TSC 3077 1.2 A TSC 1377 3 A TSC 5077 2 A TSC 1577 4.5 A 110 VDC TSC 0677 3 A TSC 3577 6.5 A (100 – 130 VDC) TSC 6077 4 A TSC 3777 10 A TSC 2677 6.5 A TSC 3677 14 A TSC 3877 20 A TSC 2078 0.25 A TSC 1278 0.8 A TSC 3078 0.6 A TSC 1378 1.5 A TSC 5078 1 A TSC 1578 2.4 A 220 VDC TSC 0678 1.5 A TSC 3578 3.5 A (200 – 250 VDC) TSC 6078 2 A TSC 3778 5 A TSC 2678 3.2 A TSC 3678 7 A TSC 3878 10 A Height: 1U = 44.45 mm (1.75) Other output voltages on request All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 5 of 13 AC/DC Converter TSC Series 40 – 2500 Watt o Models 3U Height Modules 6U Height Modules Order Code Output current Order Code Output current Output voltage Input voltage max. max. (adjust.range) range TSC 2090 8 A TSC 1290 30 A TSC 3090 20 A TSC 1390 50 A TSC 5090 35 A TSC 1590 80 A 5 VDC TSC 0690 50 A TSC 3590 110 A (4.5 – 5.5 VDC) TSC 6090 80 A TSC 3790 165 A TSC 2690 100 A TSC 3690 220 A TSC 2092 4 A TSC 1292 15 A TSC 3092 12 A TSC 1392 30 A TSC 5092 20 A TSC 1592 42 A 12 VDC TSC 0692 26 A TSC 3592 56 A (11 – 13 VDC) TSC 6092 40 A TSC 3792 85 A TSC 2692 60 A TSC 3692 115 A TSC 2094 2.4 A TSC 1294 7.5 A TSC 3094 6 A TSC 1394 15 A TSC 5094 10 A TSC 1594 23 A 24 VDC TSC 0694 14 A TSC 3594 30 A (23 – 26 VDC) TSC 6094 20 A TSC 3794 50 A TSC 2694 30 A TSC 3694 65 A 93 – 138 VAC / TSC 3894 100 A 185 – 264 VAC (selectable) TSC 2099 1 A TSC 1299 3.6 A TSC 3099 2.7 A TSC 1399 7.3 A 50 / 60 Hz TSC 5099 4.5 A TSC 1599 11 A 48 VDC TSC 0699 6.5 A TSC 3599 14 A (45 – 55 VDC) TSC 6099 9 A TSC 3799 23 A TSC 2699 15 A TSC 3699 30 A TSC 3899 45 A TSC 2097 0.5 A TSC 1297 1.5 A TSC 3097 1.2 A TSC 1397 3 A TSC 5097 2 A TSC 1597 4.5 A 110 VDC TSC 0697 3 A TSC 3597 6.5 A (100 – 130 VDC) TSC 6097 4 A TSC 3797 10 A TSC 2697 6.5 A TSC 3697 14 A TSC 3897 20 A TSC 2098 0.25 A TSC 1298 0.8 A TSC 3098 0.6 A TSC 1398 1.5 A TSC 5098 1 A TSC 1598 2.4 A 220 VDC TSC 0698 1.5 A TSC 3598 3.5 A (200 – 250 VDC) TSC 6098 2 A TSC 3798 5 A TSC 2698 3.2 A TSC 3698 7 A TSC 3898 10 A Height: 1U = 44.45 mm (1.75) Other output voltages on request All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 6 of 13 DC/DC Converter TSC Series 40 to 2500 Watt Input Specifications Inrush current 20x nominal input current typ. Inrush current limiting AC Input: standard DC Input: with option ‘‘i’’ Input current at no load 3 % full load typ. Max ripple of dc input voltage 10 % pk-pk Start-up delay time 100 ms typ. (softstart) Hold up time 230 VAC Input: 15 ms typ. 115 VAC Input: 7 ms typ. Output Specifications Output voltage range adjustable (refer topmodel selection table) Regulation – Input variation ±10% ±0.1 % max. – Load variation 10–90% ±0.2 % max. Ripple and noise (20 MHz bandwidth) <1 % Vout +30 mVpk-pk max. Transient response to ±1% 2 ms Dynamic response 6 % typ. Output current limitation 105 – 110 % of Iout max. Short circuit protection constant current, (automatic recovery) Overvoltage protection 105 % of Vout max. Remote sense standard for all models General Specifications Temperature ranges – Operating –20°C to +75°C – Optional –40°C to +75°C – Storage –40°C to +85°C Derating 3.5 %/K above +55°C Temperature coefficient 0.02 %/°C typ. Efficiency Models with 5VDC output: 70 % typ. Other models: 85 % typ. Switching frequency 33 kHz typ. Isolation voltage (60 sec.) – Models with input voltage <75 VDC: – Input / Output 1’500 VDC – Input / Case 1’500 VDC – Output / Case 1’000 VDC – Models with input voltage >80 VDC and AC models: – Input / Output 3’000 VDC – Input / Case 3’000 VDC – Output / Case 1’000 VDC Isolation resistance – Input / Output (500VDC) >10 MOhm Reliability /calculated MTBF (MIL-HDBK-217F, at +40°C, ground benign) >100’000 h Safety standards UL 60950-1, IEC/EN 60950-1 Electromagnetic compatibility (EMC), emissions EN 55022, class B, FCC part 15, level B Electromagnetic compatibility (EMC), immunity EN 61000-6-2: 2005 Connection H15 male connector (DIN 41612) (screw terminal for output curret>50A) Environmental compliance – Reach www.tracopower.com/products/tsc-reach.pdf – RoHS RoHS directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 7 of 13 DC/DC Converter TSC Series 40 to 2500 Watt Alarm Options Power fail – Option ”p” Signal if input voltage drops below the specified limit Signal output is NPN open collector,activated in ok-status DC-ok – Option ”d” Signal if output voltage drops below the speci- fied limit Signal output is NPN open collector,activated in ok-status Relay output – Option ”r” Relay instead of logical output for alarm signals (in combination with option p and d) Control Options External On/Off – Option ”H1” By external closing contact, signal referred to input. – Option ”H2” By voltage signal (5V/10mA), signal referred to output. – Option ”H3” By external closing contact, signal referred to output. External programming – Option ”e” External programming of the output voltage by a potentiometer or an external voltage of 0VDC to 10VDC. Details need to be specified. I/O Options Current sharing – Option ”cs” Provides balanced load for units in parallel operation. Controlled over interconnecting wire. Decoupling diode – Option ”dd” For redundant operation. Internal fault of one unit does not affect other units in a parallel circuit. Inrush current limiting – Option ”i” A thermistor in series to the input lines reduces its resistance when it gets warm. Mechanical Options Wall mount casing – Option ”w” Module is screwed on a mounting plate for install in a cabinet. This option includes screw terminal block for connection. Chassis mount casing – Option ”cha” Option is not available for all series. Please request Din rail – Option ”din” Option is not available for all series. Please request Mechanical strength – Option ”ms” Rugged construction for harsh environment Extended temperature range – Option ”c” The unit is designed and tested for operation at an ambient temp. range of –40°C to +75°C Further options and combinations on request All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 8 of 13 DC/DC Converter TSC Series 40 to 2500 Watt Outline Dimensions TSC 2000 Models: 165 (6.50) 1.5 HP 40.4 (1.59) (10 HP) Screw terminal connection Weight: 0.9 kg (31.7oz) for high current models TSC 3000 Models: 165 (6.50) 1.5 HP 70.8 (2.79) (14 HP) Weight: 1 kg (35.2oz) 5 HP TSC 5000 Models: 166.5 (6.56) 16 HP 4.5 HP 106.3 (4.19) 7.5 HP* 121.5 (4.78)* (21 HP) (24 HP)* Weight: 1.7 kg (59.9oz) 2.1 kg (74.0oz) * *5 VDC output units 1 U = 44.45 mm (1.75”) 1 HP = 5.08 mm (0.2”) Specifications can be changed any time without notice. http://www.tracopower.com Page 9 of 13 129 (5.08) 129 (5.08) (3U) (3U) 129 (5.08) 101.2 (3.98) (3U) 116.2 (4.57)* 100 (3.94) 105 (4.13) 100 (3.94) 105 (4.13) 100 (3.94) 106 (4.17) DC/DC Converter TSC Series 40 to 2500 Watt Outline Dimensions TSC 600 Models: TSC 6000 Models: 9HP 5HP 166.5 (6.56) 7.5HP 28 HP 213 (8.39) (42 HP) TSC 600: second connector for all models with 5 VDC output TSC 6000: second connector for all models with output voltage 26 VDC and input voltage 75 VDC Weight: TSC 600 : 2.6 kg (91.7oz) TSC 6000 : 3.5 kg (123.4oz) TSC 2600 Models: 9HP 5HP 226 (8.90) 28 HP 7.5 HP 213 (8.39) (42 HP) second connector for all models with output voltage 26 VDC and input voltage 75 VDC Weight: 4.5 kg (158.7oz) 1 U = 44.45 mm (1.75”) 1 HP = 5.08 mm (0.2”) http://www.tracopower.com Page 10 of 13 129 (5.08) 129 (5.08) 180.6 (7.11) (3U) 180.6 (7.11) (3U) 100 (3.94) 106 (4.17) 100 (3.94) 106 (4.17) DC/DC Converter TSC Series 40 to 2500 Watt Outline Dimensions TSC 1200 Models: con 2 con 1 1.5 HP 164 (6.46) 50.4 (1.98) (10 HP) Weight: 1.7 kg (59.9oz) TSC 1300 Models: con 2 con 1 164 (6.46) 1.5 HP 70.8 (2.79) (14 HP) Weight: 2.0 kg (70.5oz) 5HP TSC 1500 Models: con 2 con 1 166.5 (6.56) 16 HP 4.5HP 106.3 (4.19) 7.5HP* 121.5 (4.78)* (21 HP) Weight: (24 HP)* 3.0 kg (105.8oz) 3.7 kg (130.5oz)* *5 VDC output units 1 U = 44.45 mm (1.75”) 1 HP = 5.08 mm (0.2”) http://www.tracopower.com P Pa ag ge 1 e 11 o 1 of 1 f 13 3 262.5 (10.33) 262.5 (10.33) (6U) (6U) 262.5 (10.33) 101.2 (3.98) (6U) 116.2 (4.57)* 233.3 (9.19) 233.3 (9.19) 238 (9.37) 238 (9.37) 233.3 (9.19) 237.5 (9.35) DC/DC Converter TSC Series 40 to 2500 Watt Outline Dimensions 5HP TSC 3500 Models: con 2 con 1 226 (8.90) 16 HP 4.5HP 106.3 (4.19) Weight: 7.5HP* 121.5 (4.78)* 5.0 kg (176.3oz) (21 HP) Screw terminal connection for high current models 6.2 kg (218.6oz)* (24 HP)* *5 VDC output units 5 HP TSC 3700 Models: con 2 con 1 226 (8.90) 142 (5.59) 19 HP 7.5 HP (28 HP) Weight: Screw terminal connection for high current models 6.5 kg (229.2oz) 5 HP TSC 3600 Models: con 2 con 1 226 (8.90) 28 HP 7.5 HP 213 (8.39) (42 HP) Weight: Screw terminal connection for high current models 10 kg (352.7oz) 1 U = 44.45 mm (1.75”) 1 HP = 5.08 mm (0.2”) http://www.tracopower.com Page 12 of 13 101.2 (3.98) 262.5 (10.33) 262.5 (10.33) 262.5 (10.33) (6U) 131.5 (5.18) (6U) 180.6 (7.11) (6U) 116.2 (4.57)* 233.3 (9.19) 233.3 (9.19) 237.5 (9.35) 237.5 (9.35) 233.3 (9.19) 237.5 (9.35) DC/DC Converter TSC Series 40 to 2500 Watt Outline Dimensions 5 HP TSC 3800 Models: con 2 con 1 226 (8.90) 8.5 HP 40 HP 284.1 (11.19) (56 HP) Screw terminal connection for high current models Weight: 12.0 kg (423.2oz) Dimensions in [mm], () = Inch Tolerances: ±0.5 (±0.02) Pin pitch tolerance: ±0.3 (±0.012) Max mounting screw penetration: 3.0 mm (0.12) 1 U = 44.45 mm (1.75”) 1 HP = 5.08 mm (0.2”) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. February 27. 2018 www.tracopower.com Page 13 of 13 262.5 (10.33) (6U) 241.6 (9.51) 233.3 (9.19) 237.5 (9.35)