Manufacturers
TRACO POWER TSI10N-2410D
Description
10 W, 16 -28 VDC Vin, Single Output, 3.3 VDC@2 A DC-DC Converter
Part Number
TSI10N-2410D
Price
Request Quote
Manufacturer
TRACO POWER
Lead Time
Request Quote
Category
Capacitors » DC-DC Converter
Specifications
Manufacturer
Traco Power
Manufacturers Part #
TSI10N-2410D
Brand
TRACO POWER
Series
TSI 10N
Factory Pack Quantity
10
Dimensions
0.85 x 0.80 x 0.34"
Efficiency
83%
Mechanical Style
Non-Isolated / POL
Mounting
Through Hole
Number of Outputs
1
Operating Temperature
- 25 to + 70°C
Output Amps 1
2 A
Output Voltage V1 Nominal
3.3 VDC
Power
10 W
Subcategory
DC-DC Converter
Datasheet
Extracted Text
DC/DC Converter TSI-10N Series 10 Watt Features Step-down Switching Regulator with very high Efficiency Adjustable Output 1.8 – 3.3 VDC or 3.0 – 5.0 VDC Remote ON/OFF Overload Protection Low Output Noise Standby Current only 100 µA Small SIL- or DIL-Package 3 Year Product Warranty This new generation of step-down converters provides designers with a cost-effective solution for converting a 5, 12 or 24 VDC voltage. To achieve highest efficiency, these dc/dc converters are using newest technologies , as amorphous ferrite, solid aluminum capacitors and a synchronous com- mutation IC. A very high efficiency allows operation without additional heatsink. This product finds many applications in distributed powersystems where a voltage conversion at the point of load is an required. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. Package TSI 10N-0510 4.75 – 13.6 VDC * + 3.3 VDC 2000 mA 92.0 % SIP TSI 10N-0510D 4.75 – 13.6 VDC * + 3.3 VDC 2000 mA 92.0 % DIP TSI 10N-1211 6.0 – 16.5 VDC ** + 5 VDC 2000 mA 93.0 % SIP TSI 10N-1211D 6.0 – 16.5 VDC ** + 5 VDC 2000 mA 93.0 % DIP TSI 10N-2410 * + 3.3 VDC 2000 mA 83.0 % SIP TSI 10N-2410D * + 3.3 VDC 2000 mA 83.0 % DIP 16.0 – 28.0 VDC TSI 10N-2411 ** + 5 VDC 2000 mA 85.0 % SIP TSI 10N-2411D ** + 5 VDC 2000 mA 85.0 % DIP * Output adjustable 1.8 to 3.3 VDC ** Output adjustable 3.0 to 5.0 VDC www.tracopower.com Page 1 not recommended for new design in DC/DC Converter TSI-10N Series 10 Watt Input Specifications Input current TSI 10N-0510 21mA / 1435 mA typ. (no load / full load) TSI 10N-1211 27 mA / 895 mA typ. TSI 10-N2410 45 mA / 330 mA typ. TSI 10N-2411 45 mA / 485 mA typ. Surge voltage (1 sec max.) 5 Vin models 16 V max. 12 Vin models 25 V max. 24 Vin models 30 V max. Stand-by current 100 µA typ. Output Specifications Voltage adjustment TSI 10N-0510 & TSI 10N-2410 +1.8 VDC to +3.3 VDC TSI 10N-1211 & TSI 10N-2411 +3.0 VDC to +5.0 VDC Regulation – Input variation 0.5 % – Load variation 10 – 100 % < 1.5 % Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max. (with 2.2µF capacitor on output) Transient response time (50% Load change) 100 µsec typ. Temperature coefficient ± 0.02 % / °C Short circuit protection indefinite foldback Remote ON/OFF control ON=Pin 1 (ON/OFF Pin) to pin 3 (GND) open (3 – 5 VDC) OFF=Pin 1 (ON/OFF Pin) to pin 3 (GND) short ( – 0.3 – 1.2 VDC) General Specifications Temperature ranges – Operating – 25 °C ... + 70 °C – Storage – 25 °C ... +125 °C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217E) >1’500’000 h @ 25 °C Isolation Input/Output none Switching frequency 300 kHz typ. (PWM modulation) Physical Specifications Vibration (IEC 60068-3-6) 5 to 10 Hz amplitude 10 mm pk-pk 10 to 55 Hz acceleration 2 G Shock (IEC 6068-2-27) acceleration 20 G max. time 11 ms Package weight 4 g (0.14 oz) Soldering temperature 235°C max. / 10 sec. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 2 DC/DC Converter TSI-10N Series 10 Watt Outline Dimensions mm (inches) SIP Package 20.2 ±0.5 (0.8±0.02) 15 5.0 0.25 (0.2) 2.54 (0.1) (0.1) 10.16 (0.4) DIP Package 20.2 ±0.5 (0.8±0.02) 15.24 (0.6) 2.5 (0.01) 7 6 Pin-Out 1 5 Pin SIP DIP 5.0 2.54 2.54 2.54 2.54 1 Remote on/off Remote on/off (0.2) (0.1) (0.1) (0.1) (0.1) 2 +V Input (Vcc) +V Input (Vcc) 3 –V Input (GND) –V Input (GND) –V Output –V Output 4 +V Output +V Output 5.0 5 V Output adj. V Output adj. (0.2) 6 No Con. 7 No Con. Specifications can be changed without notice www.tracopower.com Page 3 0.8 (0.03) 0.8 (0.03) 8.3 max. 21.5 ±0.5 (0.33 max.) (0.85 ±0.02) 3.5 8.5 max. 21.5 ±0.5 3.5 ±1.5 24 max. (0.14) (0.34 max.) (0.85 ±0.02) (0.94 max.) (0.4 ±0.06) 22.5 (0.88) 0.25 (0.01) DC/DC Converter TSI-10N Series 10 Watt Connections Normal Connection (Standard) 2 4 +Vin +Vout + TSI 10N Watt C1 C2 ON/OFF V Adj. = GND 1 5 100μF/50V 2.2μF-4.7μF/10V - 3 Remote ON/OFF Connection 2 4 +Vin +Vout TSI 10N Watt + C1 ON/OFF V Adj. C2 1 GND 5 = 100μF/50V 3 2.2μF-4.7μF/10V - Output Voltage Adjustement Connection 2 4 +Vin +Vout TSI 10N Watt + C1 C2 Rx ON/OFF V Adj. = 1 GND 5 100μF/50V 100μF-200μF/10V - 3 TSI 10N-xx10 ==> R1 = 2130 Ohm Output Voltage (Vout) = 1.8 - 3.3VDC R1 · 1200 · (Vout - 1.195) Rx = R1 · 1.195 - 1200 · (Vout - 1.195) TSI 10N-xx11 ==> R1 = 3840 Ohm Output Voltage (Vout) = 3.0 - 5.0VDC Vout = adjusted output voltage Specifications can be changed without notice Rev. 04/12 Jenatschstrasse 1 • CH-8002 Zurich • Switzerland Tel. +41-1284 2911 • Fax +41-1201 1168 • e-mail: sales traco.ch• internet: http://www.tracopower.com Page 4 @ Load Load Load
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the TSI10N-2410D?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
5 W, 10.8 -16.5 VDC Vin, Single Output, - 500 VDC@0.01 A DC-DC Converter
5 W, 10.8 -16.5 VDC Vin, Single Output, 500 VDC@0.01 A DC-DC Converter
5 W, 10.8 -16.5 VDC Vin, Single Output, - 1000 VDC@0.005 A DC-DC Converter
5 W, 10.8 -16.5 VDC Vin, Single Output, 1000 VDC@0.005 A DC-DC Converter
5 W, 10.8 -16.5 VDC Vin, Single Output, - 2000 VDC@0.0025 A DC-DC Converter
5 W, 10.8 -16.5 VDC Vin, Single Output, 2000 VDC@0.0025 A DC-DC Converter
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods