CLICK HERE TO REQUEST Industrial Power Supplies PRICE | DELIVERY | SAMPLE | SUPPORT Traco Power TSP-WR Series, 180 –600 Watt TSP-WR Series Din Rail Mount Power Supplies Western/Midwest Region Eastern Region (866) 588-1750 2390 Owen Street 1900 West Park Drive, Suite 280 CB www.powergatellc.com Santa Clara, CA 95054 Westborough, MA 01581 Scheme Fax (408) 588-1751 sales@powergatellc.com Fax (508) 983-1444 Innovative and Powerful Features! EMC IEC 60950-1 UL 60950-1 LVD UL 508 ◆ For global use with single- and two phase (pending) wide-range input 100/230–500 VAC ◆ Rugged metal case for harsh industrial environments ◆ Industrial operating temperature range: –25°C to +70°C ◆ Power OK signal ◆ Remote On/Off ◆ Shock and vibration-proof ◆ Indefinite short circuit, overvoltage and overtemperature protection ◆ Redundancy module ◆ Buffer module for power backup ◆ Battery controller module The successful TSP series of high performance DIN-rail mount power supplies has ◆ 3-year product warranty been expanded with 3 additional models which features an ultrawide input range of 85-132/187-550VAC. With these input voltages the power supplies can be used in almost all single- and multi phase power networks worldwide. A high, continuously available power reserve guarantees reliable start-up of loa- ds with high inrush currents. Excellent electrical specifications and high immunity against electrical disturbances make these compact power supplies the best choice to power sensitive loads in industrial process control systems, machine tools or any other demanding industrial application. The power supplies comply also with IEC/EN 61204-3, the EMC standard for Industrial environment. 3 add-on modules for extra functions offer a great flexibility in system applications. A module for redundant operation with true power sharing is available. With the battery controller module the power supplies can be extended to a perfect DC-UPS system. The buffer module provides power back-up for up to 4 seconds without the need of any batteries. Easy and vibration proof installation with pluggable screw terminal block and snap-on mounting on DIN-rails. Models Order Code Output Voltage *Output Current Output Power (Vnom) (Imax) (Pmax) TSP 180–124WR 7.5 A 180 W 24 VDC TSP 360–124WR 15.0 A 360 W (adjustable 24 - 28 VDC) TSP 600–124WR 25.0 A 600 W * Max. current at nominal output voltage and operating temperature up to 40°C max. http://www.tracopower.com Page 1 of 11 (866) 588-1750 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product www.powergatellc.com and part number under their unique parameters and environments to ensure a product will work properly and reliably. sales@powergatellc.com CLICK HERE TO REQUEST PRICE | DELIVERY | SAMPLE | SUPPORT Traco Power TSP-WR Series Industrial Power Supplies Din Rail Mount Power Supplies TSP-WR Series 180–600 Watt Western/Midwest Region Eastern Region (866) 588-1750 2390 Owen Street 1900 West Park Drive, Suite 280 www.powergatellc.com Santa Clara, CA 95054 Westborough, MA 01581 Input Specifications Fax (408) 588-1751 sales@powergatellc.com Fax (508) 983-1444 Applicable 3-phase networks – TN, TT Systems: 500 VAC Star configuration (EN60950, UL508) 500 VAC Delta (UL508 only) – IT Systems: 400 VAC Delta (IEC-62103) 230 VAC Delta (IEC-60950) 500 VAC (UL508) Input voltage ranges 85–132 VAC/187–550 VAC 50/60 Hz range selectable by selector switch 187–264 VAC/323–550 VAC autoranges Harmonic limits EN 61000-3-2, Class A (for limited output power) Holdup time 20 ms min. (full load 230 – 500 VAC) Inrush current 115 VAC 230 VAC TSP 180-124WR t.b.a < 23 A TSP 360-124WR t.b.a < 46 A TSP 600-124WR t.b.a < 50 A Efficiency 88 % typ. Output Specifications Output voltage adjustable range 24–28 VDC Regulation – Input variation 0.5 % max. – Load variation (10–100 %) 0.5 % max. – Load variation (10–100 %) parallel mode 2.0% Ripple and noise (20MHz bandwidth) 100 mV pk-pk typ. (150 mV pk-pk max. at Imax) Electronic short circuit protection current limitation at 125 % of Imax. constant current, automatic recovery Output overvoltage protection 34 V Overload protection electronic overload protection Overtemperature protection switch off at overtemperature, automatic restart Status indicator dual colour LED (green: DC OK, red: DC off) Power OK signal – trigger threshold: 18 – 22 V – relay output DC OK = contact closed (rated: 30 VDC/1.0 A) Max. capacitive load unlimited General Specifications Operating temperature range –25°C to +70°C max. (for derating see graph A on page 3) Cooling convection cooling, no internal fan Storage temperature –25°C to +85°C Humidity (non condensing) 95 % rel. H max. Pollution degree 2 Temperature coefficient 0.02 %/K Reliability, calculated MTBF >350’000 houres in accordance to IEC 61709 Remote On/Off by ext. contact. DC on: -S contact open DC off: -S connected via 1 Kohm to -Vout Isolation according to IEC/EN 60950-1, UL 60950-1, UL 508 Safety standards – Information technology equipment IEC/EN 60950-1, UL 60950-1, CSA-C22.2 No. 60950-1-03 – Industrial control equipment UL 508C, CSA-C22.2 No. 107 – Electrical equipment of machines EN 60204 – Electronic equipment for power installation EN 50178 – Safety transformers for SMPS EN 61558-2-4 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 11 (866) 588-1750 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product www.powergatellc.com and part number under their unique parameters and environments to ensure a product will work properly and reliably. sales@powergatellc.com CLICK HERE TO REQUEST PRICE | DELIVERY | SAMPLE | SUPPORT Traco Power TSP-WR Series Industrial Power Supplies Din Rail Mount Power Supplies TSP-WR Series 180–600 Watt Western/Midwest Region Eastern Region (866) 588-1750 2390 Owen Street 1900 West Park Drive, Suite 280 www.powergatellc.com Santa Clara, CA 95054 Westborough, MA 01581 Fax (408) 588-1751 sales@powergatellc.com Fax (508) 983-1444 General Specifications Safety approvals – CB scheme (for IEC 60950-1) www.tracopower.com/products/tsp-wr-cb.pdf and certifications – CSA certificate for UL 60950-1, UL 508 (file no. 219759) CSA-22.2 No. 60950-1-03, CSA C22.2 No. 107.1-01 www.tracopower.com/products/tsp-wr-csa.pdf – GS certificate for IEC/EN 60950-1, EN 60204, EN 61558-2-4 www.tracopower.com/products/tsp-wr-gs.pdf – SIQ certificate (IEC/EN 60950-1) www.tracopower.com/products/tsp-wr-siq.pdf Safety class Degree of electrical protection I (IEC 536) Case protection IP 20 (IEC 529) Electromagnetic compatibility (EMC), Emissions IEC/EN 61000-6-3, IEC/EN 61204-3 – Conducted RI suppression on input EN 55011 class B, EN 55022 class B, – Radiated RI suppression EN 55011 class B, EN 55022 class B, Electromagnetic compatibility (EMC), Immunity IEC/EN 61000-6-2, IEC/EN 61204-3 – Electrostatic discharge (ESD) IEC/EN 61000-4-2 4 kV / 8 kV – Radiated RF field immunity IEC/EN 61000-4-3 10 V / m – Electrical fast transient / burst immunity IEC/EN 61000-4-4 2 kV – Surge immunity IEC/EN 61000-4-5 1 kV / 2 kV – Immunity to conducted RF disturbances IEC/EN 61000-4-6 10 V – Power frequency field immunity IEC/EN 61000-4-8 30 A / m – Voltage dips IEC/EN 61000-4-11 Environment – Vibration acc. IEC 60068-2-6; 3 axis, sine sweep, 10-55 Hz, 1g, 1oct/min – Shock acc. IEC 60068-2-27 3 axis, 15 g half sine, 11 ms Enclosure material aluminium (chassis) / zinc plated steel (cover) Mounting – DIN-rail mounting for DIN-rails as per EN 50022-35x15/7.5 (snap-on with self-locking spring) – Wall mounting (option) with wall mounting bracket - see page 10 Connection detachable screw terminals (plugs included) 2 terminals per output Output Power Derating A) Output Power Derating B) Output Power Derating vs Ambient Temperature vs Input Voltage 100 100 90 90 TSP 600 TSP 600 80 80 TSP 180 70 70 TSP 360 TSP 180 60 TSP 360 60 50 50 40 40 30 30 20 20 10 10 0 0 -25 40 50 60 70 85 100 115 132 187 264 323 550 Temperature [°C] Input Voltage [VAC] All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 11 (866) 588-1750 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product www.powergatellc.com and part number under their unique parameters and environments to ensure a product will work properly and reliably. sales@powergatellc.com Output Power [% Pmax] Output Power [% Pmax] CLICK HERE TO REQUEST PRICE | DELIVERY | SAMPLE | SUPPORT Traco Power TSP-WR Series Industrial Power Supplies Din Rail Mount Power Supplies TSP-WR Series 180–600 Watt Western/Midwest Region Eastern Region (866) 588-1750 2390 Owen Street 1900 West Park Drive, Suite 280 www.powergatellc.com Santa Clara, CA 95054 Westborough, MA 01581 Fax (408) 588-1751 sales@powergatellc.com Fax (508) 983-1444 TSP–REM360 Redundancy Module With this module and two power supplies of the TSP-WR series (of same type) a highly reliable, true redundant power system can be configured without any addi- tional components. This module enforces equivalent sharing of the output current by each power supply. The system is fully redundant and provides output power even if one power supply has completely failed e.g. by short circuit on the output. In the event of either power supply failing or being disconnected, the second unit will automatically supply the full current to the load. The redundancy of the system is monitored and if lost, indicated by an alarm output. The inputs are hot swappable and can be loaded up to 15A each. Models Order Code Input Max Power Output Voltage Output Power (includes terminal plugs) per Input adjust. max. TSP–REM360 2 x 360 W 360 W 2 x 24 VDC 24 VDC 2 x Control input (24 - 27 VDC) TSP–REM600 2 x 600 W 600 W Function Diagram Connector Positions + J1.2 J2.3 Front viewBottom viewTop view J2.4 + DC IN 1 Output _ J1.1 J2.1 - - + + Load _ J2.2 J3.1 J3.2 Remote Link 2 Remote TSP Output Link 1 Remote Link 1 Volt adjust + J1.4 DC IN 2 _ J1.3 J4.1 REM Controller J4.2 TSP Remote Link 2 Power Alarm DC IN 1 DC IN 2 Supplies Remote On/Off Redundancy ok J5.1 J5.2 J5.3 J5.4 - + - + Alarm Remote On/Off Specifications Operating temperature –25°C to +70°C max. derating above +40°C :1.5 %/K Electromagnetic compatibility in correspondence to connected units (no internal swit ching device) Redundancy OK signal (Alarm) trigger threshold at 18–22VDC, contact open if both inputs failed Dimensions see page 8 Remote link cable (0.5m) 2 cables included (order code TSP-JC) www.tracopower.com/products/tsp-rc-cable.pdf Remote On/Off by ext. contact: contact open = On, contact closed = Off Installation instructions www.tracopower.com/products/tsp-rem_inst.pdf (866) 588-1750 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product www.powergatellc.com http://www.tracopower.com Page 4 of 11 and part number under their unique parameters and environments to ensure a product will work properly and reliably. sales@powergatellc.com CLICK HERE TO REQUEST PRICE | DELIVERY | SAMPLE | SUPPORT Traco Power Industrial Power Supplies TSP-WR Series 180–600 Watt TSP-WR Series Din Rail Mount Power Supplies TSP–BFM24 Buffer Module Western/Midwest Region Eastern Region (866) 588-1750 2390 Owen Street 1900 West Park Drive, Suite 280 www.powergatellc.com Santa Clara, CA 95054 Westborough, MA 01581 The TSP-BFM24 buffer module will hold the output voltage of a 24 VDC power Fax (408) 588-1751 sales@powergatellc.com Fax (508) 983-1444 supply after brown outs or voltage dips of ten 50Hz cycles at full load. During this buffer period no deterioration of the 24 VDC output voltage will occur. For many applications this buffer module is an ideal and cost effective alternative to a battery based backup system. The buffer module consists of a large bank of capacitors. When the power supply is switched on, the buffer capacitors will be charged. This will take approximately 30 seconds and an opto-coupler signal indicates the “READY“ condition. When a power fail occurs, the capacitor bank is discharged, maintaining the output of the buffer module at its nominal voltage. This condition is indicated by an “POWER FAIL“ signal. The hold up time is typically 200 ms at 25 A and 4 seconds typically at 1,2A. After 4 seconds the buffer device will switch off the output voltage. The operation modes of the module are indicated by a LED on the front panel also. The big advantage of this buffer solution is, that it is fully maintenance free and its storage capability does not deteriorate over the live time of the product. Models Order Code Operating Voltage Buffer Time Output Power (includes terminal plugs) Range max. 200ms typ. @ 25A max. TSP-BFM24 24...28VDC 600 W 4.0 s max. @1.2 A Function Diagram Connector Positions J2.2 Inhibit Discharge J2.1 Charge TSP J1.1 J1.2 J1.3 J1.4 Volt adjust Load J2.4 J2.6 Voltage Voltage Active Ready J2.3 J2.5 Detection Detection Specifications Operating temperature –25°C to +70°C max. derating above +40°C : 1.5 %/K Electromagnetic compatibility in correspondence to connected units (no internal switching device) Buffer voltage adjustable, >1 V below input voltage, min. 22 VDC Charging 0.6 A max./30 s max. Status signals Buffer Active , Buffer Ready (optocoupler output) and dual colour LED for status indication Inhibit optocoupler input: 35 V max. < 5mA Dimensions see page 8 Installation instructions www.tracopower.com/products/tsp-bfm_inst.pdf http://www.tracopower.com Page 5 of 11 (866) 588-1750 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product www.powergatellc.com and part number under their unique parameters and environments to ensure a product will work properly and reliably. sales@powergatellc.com CLICK HERE TO REQUEST PRICE | DELIVERY | SAMPLE | SUPPORT Traco Power TSP-WR Series Industrial Power Supplies Din Rail Mount Power Supplies TSP-WR Series 180–600 Watt Western/Midwest Region Eastern Region (866) 588-1750 2390 Owen Street 1900 West Park Drive, Suite 280 www.powergatellc.com Santa Clara, CA 95054 Westborough, MA 01581 TSP–BCM24 Battery Controller Module Fax (408) 588-1751 sales@powergatellc.com Fax (508) 983-1444 This module provides a professional battery management system to charge and monitor an external lead-acid battery. Together with a power supply of the TSP series, a perfect DC-UPS system can be configured. The connected battery will be charged and held in charged mode by the power supply. In the event of a mains power failure the battery will supply the output power until the battery is dischar- ged. As a consequence, the output voltage of the system is equivalent to the battery voltage. To avoid overcharging the battery, an external temperature sensor adjusts the battery voltage automatically to the required end of charge voltage. This can extend the battery life. The battery is protected against deep discharge. Mains power and battery status are monitored regularly and failures indicated by corresponding LED’s and alarm outputs. The module also provides an external On/Off input to switch-off both, TSP-TS battery temperature sensor power supply and battery. (10 kOhm NTC with 2m cable) included Models Order code Inputs Input Power Output Voltage *Output Power (includes terminal plugs) max nom. max. TSP-BCM24 360 W 360 W 24 VDC Power Supply 24 VDC and 24 VDC Battery TSP-BCM24A 600 W 600 W *reduce max. output current by battery charging current Function Diagram Connector Positions Front view Bottom viewTop view + J1.2 J2.3 - - + + J2.4 + DC IN Output _ J1.1 J2.1 Load _ J2.2 Fuse Output J3.1 Volt adjust J3.2 + J1.4 Remote TSP Link _ J1.3 Power Supply 24V Battery Battery Controller AC OK Bat. OK DC OK Remote Link 48 V/6.6 A Remote On/Off DC IN Battery Temp. Sensor (TS) J5.1 J5.2 J5.3 J5.4 J5.5 J5.6 J5.7 J5.8 J5.9 J5.10 DC-OK BAT.-OK DC-OK Remote T Temp. input output On/Off - + - + Sensor TSP-TS (included) Specifications Operating temperature –25°C to +70°C max. derating above +40°C 1.5 %/K Electromagnetic compatibility in correspondence to connected units (no internal switching device) Battery protection over voltage, deep discharge, short circuit- and revers connection (built-in fuse) Status signals DC-OK input, DC-OK output, BAT OK all relay contact closed at status OK Rating per relay contact 30 VDC/1.0 A max. Dimensions see page 8 Remote link cable (0.5m) 1 cable included (order code TSP-JC) www.tracopower.com/products/tsp-rc-cable.pdf Remote On/Off by ext. contact: contact open = On, contact closed = Off Installation instructions www.tracopower.com/products/tsp-bcm_inst.pdf http://www.tracopower.com Page 6 of 11 (866) 588-1750 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product www.powergatellc.com and part number under their unique parameters and environments to ensure a product will work properly and reliably. sales@powergatellc.com CLICK HERE TO REQUEST PRICE | DELIVERY | SAMPLE | SUPPORT Traco Power TSP-WR Series Industrial Power Supplies Din Rail Mount Power Supplies TSP-WR Series 180–600 Watt Western/Midwest Region Eastern Region (866) 588-1750 2390 Owen Street 1900 West Park Drive, Suite 280 www.powergatellc.com Santa Clara, CA 95054 Westborough, MA 01581 TSP–BAT Battery Pack Fax (408) 588-1751 sales@powergatellc.com Fax (508) 983-1444 TSP battery packs are designed to build, in connection with the TSP-BCM battery controller module, a complete DC-UPS system. The entire range utilizes 12V main- tenance free VRLA (valve regulated lead acid) batteries made by PANASONIC. These are not spillable lead gel type batteries. Two 12V batteries are connected in series and assembled into a stainless steel enclosure, with integrated connector and connection cable. Models Order Code Nominal Voltage Charge Current Nominal Capacity (includes mating connectors) max. (at 25°C, 77°F) TSP-BAT24-034 0.80 A 3.4 Ah TSP-BAT24-072 24 VDC 1.75 A 7.2 Ah TSP-BAT24-120 3.00 A 12.0 Ah TSP-BAT24-034 TSP-BAT24-072 TSP-BAT24-120 Detailed drawings in process Specifications Temperature ranges (max) – during discharge –15°C to +50°C max. – when charging / charged 0°C to +40°C max. – storage –15°C to +40°C max. Battery lifetime 3-5 years see general battery information for details: www.tracopower.com/products/tsp-panas_gen.pdf Remote link cable (0.5m) 1 cable included (order code TSP-JC) www.tracopower.com/products/tsp-rc-cable.pdf Weight TSP–BAT24–034 3.2 kg (7.1 lb) TSP–BAT24–072 5.8 kg (12.9 lb) TSP–BAT24–120 9.0 kg (20.0 lb) Battery datasheets TSP–BAT24–034 www.tracopower.com/products/tsp-panas_034.pdf TSP–BAT24–072 www.tracopower.com/products/tsp-panas_072.pdf TSP–BAT24–120 www.tracopower.com/products/tsp-panas_120.pdf http://www.tracopower.com Page 7 of 11 (866) 588-1750 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product www.powergatellc.com and part number under their unique parameters and environments to ensure a product will work properly and reliably. sales@powergatellc.com CLICK HERE TO REQUEST PRICE | DELIVERY | SAMPLE | SUPPORT Traco Power TSP-WR Series Industrial Power Supplies Din Rail Mount Power Supplies TSP-WR Series 180–600 Watt Western/Midwest Region Eastern Region (866) 588-1750 2390 Owen Street 1900 West Park Drive, Suite 280 www.powergatellc.com Santa Clara, CA 95054 Westborough, MA 01581 Case Dimensions Fax (408) 588-1751 sales@powergatellc.com Fax (508) 983-1444 35.0 (1.38) 110.0 (4.33) Models: TSP-REM360 TSP-BCM24 DC OK DC ON O/P ADJ. PE NL 25.0 5.0 (0.98) (0.20) P/S P S Remote Weight: 0.5 kg (1.0 lb) Models: 54.0 (2.13) 110.0 (4.33) TSP 180-124WR TSP-REM600 DC OK TSP-BCM24A DC ON O/P ADJ. TSP-BFM24 PE N(L2)L 25.0 14.5 (0.98) (0.57) Remote P/S Dimensions in [mm], ( ) = inch Tolerances: ±0.5 mm (±0.02) Weight: 0.7 kg (1.4 lb) (866) 588-1750 http://www.tracopower.com Page 8 of 11 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product www.powergatellc.com and part number under their unique parameters and environments to ensure a product will work properly and reliably. sales@powergatellc.com 5.0 5.0 110.0 (4.33) 110.0 (4.33) (0.20) (0.20) S P 80.0 (3.15) 38.5 (1.52) 80.0 (3.15) 38.5 (1.52) CLICK HERE TO REQUEST PRICE | DELIVERY | SAMPLE | SUPPORT Traco Power TSP-WR Series Industrial Power Supplies Din Rail Mount Power Supplies TSP-WR Series 180–600 Watt Western/Midwest Region Eastern Region (866) 588-1750 2390 Owen Street 1900 West Park Drive, Suite 280 www.powergatellc.com Santa Clara, CA 95054 Westborough, MA 01581 Case Dimensions Fax (408) 588-1751 sales@powergatellc.com Fax (508) 983-1444 80.0 (3.15) 125.0 (4.92) Model: TSP 360-124WR DC OK DC ON O/P ADJ. PE N(L2)L 46.0 17.0 (1.81) (0.67) 25.0 25.0 (0.98) (0.98) Remote P S P/S Weight: 1.1 kg (2.4 lb) Dimensions in [mm], ( ) = inch Tolerances: ±0.5 mm (±0.02) http://www.tracopower.com Page 9 of 11 (866) 588-1750 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product www.powergatellc.com and part number under their unique parameters and environments to ensure a product will work properly and reliably. sales@powergatellc.com 5.0 125.0 (4.92) (0.20) 86.5 (3.41) 45.0 (1.77) CLICK HERE TO REQUEST PRICE | DELIVERY | SAMPLE | SUPPORT Traco Power TSP-WR Series Industrial Power Supplies Din Rail Mount Power Supplies TSP-WR Series 180–600 Watt Western/Midwest Region Eastern Region (866) 588-1750 2390 Owen Street 1900 West Park Drive, Suite 280 www.powergatellc.com Case Dimensions Santa Clara, CA 95054 Westborough, MA 01581 Fax (408) 588-1751 sales@powergatellc.com Fax (508) 983-1444 Model: TSP 600-124WR P/S Remote P S 25.0 25.0 (0.98) (0.98) 21.0 148.0 (5.83) (0.83) 190.0 (7.48) 125.0 (4.92) DC ON O/P ADJ. DC OK PE N(L2)L Weight: 3.0 kg (6.0 lb) Dimensions in [mm], ( ) = inch Tolerances: ±0.5 mm (±0.02) (866) 588-1750 http://www.tracopower.com Page 10 of 11 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product www.powergatellc.com and part number under their unique parameters and environments to ensure a product will work properly and reliably. sales@powergatellc.com 125.0 (4.92) 86.5 (3.41) 45.0 (1.77) CLICK HERE TO REQUEST PRICE | DELIVERY | SAMPLE | SUPPORT Traco Power TSP-WR Series Industrial Power Supplies Din Rail Mount Power Supplies TSP-WR Series 180–600 Watt Western/Midwest Region Eastern Region (866) 588-1750 2390 Owen Street 1900 West Park Drive, Suite 280 www.powergatellc.com Santa Clara, CA 95054 Westborough, MA 01581 Fax (408) 588-1751 sales@powergatellc.com Fax (508) 983-1444 TSP–WMK Wall Mounting Bracket Ordercode of kit For models Content of kit TSP-WMK03 TSP 180-124WR, TSP-REM360, TSP-BCM24(A), TSP-BFM 1 bracket TSP-WMK02 TSP 360-124WR, TSP 600-124WR 2 brackets 85.0 (3.35) TSP-WMK03 42.5 (1.67) 34.5 (1.36) 34.5 (1.36) ø 4.25 (0.17) TSP 180-124WR TSP-REM360 TSP-BCM24(A) TSP-BFM ø 4.25 (0.17) ø 4.25 (0.17) R 2.12 (0.083) 4 x positioning holes 2.0 (0.08) 15.0 15.0 (0.59) (0.59) Material: 2 mm Mild Steel Tolerance: ±0.1mm (± 0.004) TSP-WMK02 46.0 (1.81) TSP 360-124WR 33.0 (1.30) 96.0 (3.78) 25 (0.98) ø 4.3 (0.17) 2x ø4.3 (0.17) TSP 600-124WR 4 x positioning holes 198.0 (7.80) 15.0 (0.59) Material: 2 mm Mild Steel Tolerance: ±0.1mm (± 0.004) Dimensions: [mm] ( ) = Inch Dimensions in [mm], ( ) = Inch Specifications can be changed any time without notice. Tolerances: ±0.5 mm (±0.02) Rev. 10/12 (866) 588-1750 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product www.powergatellc.com Jenatschstrasse 1 · CH-8002 Zurich · Switzerland and part number under their unique parameters and environments to ensure a product will work properly and reliably. sales@powergatellc.com Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com Page 11 of 11 30.0 (1.18) 2.0 (0.08) 2.0 (0.08) 7.0 (0.28) 7.0 (0.28) 50.0 (1.97) R 2.12 (0.083) R 2.12 (0.083) R 2.12 (0.083) 2.0 (0.08) 2.0 (0.08) 2.0 (0.08) 62.5 (2.46) 25.0 (0.98) 25.0 (0.98) 37.0 (1.45) 74.0 (2.91) 62.5 (2.46) 55.0 (2.16)