TRACO POWER TSR3-2450A
Specifications
Manufacturer
Traco Power
Manufacturers Part #
TSR3-2450A
Brand
TRACO POWER
Series
TSR 3
Factory Pack Quantity
10
Cooling Method
Convection
Dimensions
0.65 x 0.41 x 0.25"
Efficiency
91%
Mechanical Style
Non-Isolated / POL
Mounting
Through Hole
Operating Temperature
- 40 to + 85°C
Output Amps 1
3 A
Power
1.8 W
Subcategory
DC-DC Converter
Datasheet
Extracted Text
DC/DC Converters TSR-3 Series, 3 A Features ◆ High performance 3 Amp. switching regulator ◆ Suitable for positive & negative output circuit ◆ High efficiency up to 95 % ◆ Adjustable output voltages ◆ Wide input voltage ranges 2.5–5.5, 4.5–14 and 10–30 VDC ◆ Short circuit protection ◆ Remote On/Off input ◆ Low output ripple & noise ◆ 3-year product warranty The TSR 3 models are non isolated step down switching regulators. Since production May 2013 they can also be operated with negative output voltage. They come in a very compact open frame package of 15.5 x 9.4 x 6.2mm. The high efficiency of up to 95% admits a full load operation up to 50°C and up to 85°C with 50% current reduction. A low standby current, a very wider input range and no requirement for heatsink give these switching regulators a significant advantage over linear regulators. Togther with a remote On/Off input and protection against short circuit and over temperature the TSR 3 Series models are ideal point of load regulators for high reli- able and energy critical applications. Models Order code * Input voltage range Output voltage Output current max. Efficiency typ. 6) adjustable Positive output circuit 1) TSR 3-0533 2.5 – 5,5 VDC 0.6 – 3.3 VDC 95 % at 2.5 VDC 2) TSR 3-1250 4.5 – 14 VDC 0.59 – 6.0 VDC 93 % at 3.3 VDC 3 A 3) TSR 3-2450 10 – 30 VDC 3.0 – 6.0 VDC 91 % at 5.0 VDC 3) TSR 3-24150 10 – 30 VDC 5.0 – 15 VDC 95 % at 12 VDC Negative output circuit 1.5 A at |Vout| >3.3 VDC TSR 3-1250 4.7 – 13 VDC 4) -0.59 – -6.0 VDC 90 % at -3.3 VDC 2.2 A at |Vout| <3.3 VDC 5) TSR 3-2450 10 – 27 VDC -3.0 – -6.0 VDC 2.2 A 90 % at -5.0 VDC 5) -5.0 – -15 VDC 1.2 A 91 % at -12 VDC TSR 3-24150 10 – 25 VDC * Suffix A for models with angular pins (see dimensions), availability on demand, no stocking item. 1) input voltage must be at least 0.5 V higher than output voltage 2) input voltage must be at least 2.0 V higher than output voltage, max. 9 VDC if output is <0.9 VDC 3) input voltage must be at least 3.0 V higher than output voltage 4) max. input voltage = 14-|Vout| 5) max. input voltage = 30-|Vout| 6) open trim input = min. output voltage http://www.tracopower.com Page 1 of 3 DC/DC Converters TSR-3 Series 3 A Input Specifications Maximum input current (@ Vin min. and 3 A output current) TSR 3-0533: 3.0 A TSR 3-1250: 2.6 A TSR 3-2450: 2.2 A TSR 3-24150: 3.0 A No load input current positive output circuit 25 mA typ. – negative output circuit 35 mA typ., 60 mA typ. for TSR 3-24150 – Reflected ripple current positive output circuit TSR 3-0533 and TSR 3-1250: 30 mA typ. – TSR 3-2450 & TSR 3-24150: 30 mA typ. with ext. filter, see fig. 1 page 3 negative output circuit all models: 30 mA typ. with ext. filter, see fig. 2 page 3 – Input filter internal capacitors Output Specifications Voltage set accuracy ±2 % (at full load) Output voltage adjustment see application note page 3 Regulation – Input variation >2.5 Vout: 0.2 %, <2.5 Vout: 5 mV – Load variation 0 – 100 % >2.5 Vout: 0.8 %, <2.5 Vout: 20 mV – Load variation 10 – 90 % >2.5 Vout: 0.6 %, <2.5 Vout: 15 mV Temperature coefficient ±1 %/°C max. Overshoot startup voltage 1.0 % max. Minimum load not required Ripple and noise (20 MHz Bandwidth) TSR 3-0533: 30 mVp-p TSR 3-1250: 60 mVp-p TSR 3-2450: 75 mVp-p TSR 3-24150: 150 mVp-p Dynamic load response 50 % load change (upper half) 150 mV max. peak variation (250 mV max. for TSR 3-24150) 120 µs max. response time Startup rise time 10 % to 90 % Vout TSR 3-0533 & TSR 3-1250: 6 ms TSR 3-2450 & TSR 3-24150: 10 ms Short circuit protection continuous, automatic recovery Current limitation TSR 3-0533: 280 % typ. other models: 220 % typ. Capacitive load – positive output; ESR > 1 mOhm TSR 3-24150: 500 µF max. other models: 1000 µF max. – positive output; ESR > 10 mOhm TSR 3-24150: 1200 µF max. other models: 3000 µF max. – negative output TSR 3-1250: 780 µF max. TSR 3-2450: 2200 µF max. TSR 3-24150: 580 µF max. General Specifications Temperature ranges – Operating (natural convection cooling 20 LFM) –40°C to +85°C – Storage –55°C to +125°C Derating 1.5 %/K above +50°C Thermal shock acc. MIL-STD-810F Humidity (non condensing) 5 % to 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >4’500’000 h Isolation voltage none Switching frequency TSR 3-0533 & TSR 3-1250: 600 kHz typ. TSR 3-2450 & TSR 3-24150: 300 kHz typ. Remote On/Off – On TSR 3-0533: open or Vin (pin 1 ref. to GND) other models: open or 1 to 12 VDC – Off 0 to 0.3 VDC – Off idle current: TSR 3-0533 & TSR 3-1250: 1.5 mA typ. TSR 3-2450 & TSR 3-24150: 6 mA typ. Environmental compliance – Reach www.tracopower.com/overview/tsr3 – RoHS RoHS directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TSR-3 Series 3 A Applications notes Input filter to reduce reflected ripple current fig. 1 fig. 2 Positive output circuit Negative output circuit L1 GND + + 24 Input TSR 3 C1 C2 Output Input 3 GND + 24 TSR 3 GND GND C1 C2 Output 3 C1 = 220 µF, ESR <0.1 Ohm C2 = 150 µF C1, C2 =10 µF, MLCC L1 = 8.2 µH Output voltage adjustment (for negative and positive circuit) Model R trim [KOhm] 1/16 W TSR 3-0533 1.2/(|Vout| -0.6)-0.01 4 TSR 3 TSR 3-1250 1.18/(|Vout| -0.59) 5 Load TSR 3-2450 11.2/(|Vout| -3) 3 Rtrim TSR 3-24150 8.4/(|Vout| -5) (|Vout| = absolute value) Outline Dimensions Standard version Angular Pin version (optional) W 6.0 6.2 (0.24) (0.25) Pin-Out positive negative 1 Remote On/Off 2 +Vin (Vcc) 3 GND –Vout 4 +Vout GND 5 Trim 5.1 5S 1 quare pins 0.64 x 0.64 (0.20) (0.025 x 0.025) 4 x 1.70 3.7 (0.14) (4 x 0.06) TSR 3-0533 & TSR 3-1250: W=9.4 (0.37) H=15.5 (0.61) TSR 3-2450 & TSR 3-24150: W=10.4 (0.41) H=16.5 (0.65) (Component allocation is model specific) Dimensions in [mm], () = Inch Pin pitch tolerances: ±0.25 (±0.01) Weight TSR 3-0533 & TSR 3-1250: 1.7 g Pin profile tolerance: ±0.1 (±0.004) TSR 3-2450 & TSR 3-24150: 2.1 g Other tolerances: ±0.5 (±0.02) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. February 11. 2016 www.tracopower.com Page 3 of 3 3.3 H (0.13)
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the TSR3-2450A?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Manufacturers




What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods