TRACO POWER TSV1215D

DC/DC Converters TSV Series, 1 Watt Features ◆ SMD package (SOIC-22) ◆ Isolated single and dual output models ◆ I/O isolation 3‘000 VDC ◆ High efficiency up to 81 % ◆ Extended temperature range –40°C to +85°C ◆ High accuracy of pin co-planarity ◆ Available in tape and reel package ◆ Lead free design, RoHS compliant ◆ 3-year product warranty The TSV series are miniature, 1W DC/DC-converters with high isolation in a SMD package. The devices can be soldered without any problems in a high temperature lead free solder process. With the small footprint, these converters are the ideal solution for board level power distribution, mainly for applications in the industrial- and telecom field. Models Ordercode Input voltage Output voltage Output current max. Efficiency typ. TSV 0505S 5 VDC 200 mA 71 % TSV 0512S 12 VDC 80 mA 78 % TSV 0515S 5 VDC ±10 % 15 VDC 65 mA 78 % TSV 0505D (Nominal 5 VDC) ±5 VDC ±100 mA 72 % TSV 0512D ±12 VDC ±40 mA 78 % TSV 0515D ±15 VDC ±30 mA 79 % TSV 1205S 5 VDC 200 mA 71 % TSV 1212S 12 VDC 80 mA 79 % TSV 1215S 12 VDC ±10 % 15 VDC 65 mA 80 % TSV 1205D (Nominal 12 VDC) ±5 VDC ±100 mA 74 % TSV 1212D ±12 VDC ±40 mA 80 % TSV 1215D ±15 VDC ±30 mA 81 % TSV 2405S 5 VDC 200 mA 71 % TSV 2412S 12 VDC 80 mA 78 % TSV 2415S 24 VDC ±10 % 15 VDC 65 mA 79 % TSV 2405D (Nominal 24 VDC) ±5 VDC ±100 mA 72 % TSV 2412D ±12 VDC ±40 mA 79 % TSV 2415D ±15 VDC ±30 mA 80 % http://www.tracopower.com Page 1 of 3 not recommended for new design in DC/DC Converters TSV Series 1 Watt Input Specifications Input current no load / full load 5 Vin models: 30 mA / 260 mA typ. 12 Vin models: 12 mA / 110 mA typ. 24 Vin models: 7 mA / 55 mA typ. Surge voltage (1 sec. max.) 5 Vin models: 9 V max. 12 Vin models: 18 V max. 24 Vin models: 30 V max. Reverse voltage protection 0.3 A max. Reflected input ripple current* can be reduced by ext. 1–3.3 µF polyester film capacitor Input filter internal capacitor Output Specifications Voltage set accuracy ±4 % max. Voltage balance (dual output models, balanced load) 1 % max. Regulation – Input variation 1.2 % / 1% change Vin – Load variation 20 – 100 % 10 % max. Ripple and noise (20 MHz Bandwidth) 75 mV pk-pk max. Temperature coefficient ±0.02 %/K Short circuit protection limited 0.5 sec. max. Capacitive load 5 VDC single output models: 33 µF max. 5 VDC dual output model: 10 µF max. 12/15 VDC single output models: 4.7 µF max. 12/15 VDC dual output models: 2.2 µF max. General Specifications Temperature ranges – Operating –40°C to +85°C (no derating) – Case temperature +95°C max. – Storage –40°C to +105°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTTF (MIL-HDBK-217F, @ +25°C, ground benign) >2’000’000 h Isolation voltage (Input/Output, 60 sec.) 3‘000 VDC Isolation capacitance (Input/Output) 60 pF typ. Isolation resistance (Input/Output) >10‘000 M Ohm (500VDC) Switching frequency 100 kHz typ. (frequency modulation) Frequency change over line and load ±30 % max. Physical Specifications Casing material non conductive FR4 (UL 94V-0 rated) Package weight 2.2 g (0.07 oz) Reflow soldering profile peak temp. 245°C (10 sec. max.) 217°C for 90 sec. max. Convection reflow solder process is recommended Packaging information www.tracopower.com/products/tsv-pack.pdf All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise sta- ted. http://www.tracopower.com Page 2 of 3 DC/DC Converters TSV Series 1 Watt Derating all Models +85˚C +105˚C 100 100 90 90 80 80 70 70 60 60 50 -5.0% /˚C 50 40 40 30 30 20 20 10 10 0 0 -40 -30 -20 -10 0103 20 0 40 50 60 70 80 90 100 110 Ambient Temperature [˚C] Outline Dimensions 6.5 (0.256) S Seating Plane 10 Pins 0.2 M S ± 4° 1.3 P (0.05) 7.0 (0.27) 2.54 2.54 5.08 2.54 (0.1) (0.1) (0.2) (0.1) 9.2 (0.36) 0.6 (0.024) 11.2 (0.44) 22 20 18 14 12 Pin-Out Pin Single Dual Top view 1 –Vin (GND) –Vin (GND) 3 +Vin (Vcc) +Vin (Vcc) 5 ntc ntc 13 59 11 9 –Vout Common 15.24 (0.6) 11 ntc –Vout 1.0 Solder pad (0.04) 12 ntc ntc 14 +Vout +Vout 18 ntc ntc 20 ntc ntc 22 ntc ntc (ntc = not to connect) Dimensions in [mm], () = Inch 2.54 2.54 5.08 2.54 Pin diameter: 1.0 ±0.05 (0.02 ±0.002) (0.1) (0.1) (0.2) (0.1) Pin pitch tolerances: ±0.13 (±0.005) Case tolerances: ±0.25 (±0.01) Specifications can be changed any time without notice. Rev. 04/11 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com Page 3 of 3 4.7 12.7 (0.50) Output Power [%] (0.18) 1.8 8.0 (0.31) (0.01) 0.25 6.7 (0.01) (0.26) 0.25 (0.01) Output Power [%]