TRACO POWER TYL05-05S30

DC/DC Converter TYL/TVL Series 1.5-5 Watt Features Ultra low Ripple and Noise Full SMD-Design with Ceramic Capacitores Tightly regulated Outputs High Output Stability Short Circuit Protection Shielded Metal Case Single- and Dual Output Models 2 Year Product Warranty The TYL and TVL Series are DC/DC-Converter with very low output ripple and noise specification. These DC/DC-Converter are an ideal solution for noise sensitive applications as analoge circuits, audio applications, reference voltages or mesuring systems. SMD- technology and a 100 % production test ensure a very high reliability of these products. Models Ordercode Input voltage range Output 1 Output 2 Ripple and noise max. TYL 05-05S30 5 VDC / 300 mA 6 mVpk-pk TYL 05-12S12 12 VDC / 120 mA 6 mVpk-pk TYL 05-15S10 15 VDC / 100 mA 6 mVpk-pk 4.75 – 6 VDC TYL 05-05W08 + 5 VDC / 80 mA – 5 VDC/ 80 mA 6 mVpk-pk TYL 05-12W06 +12 VDC / 65 mA –12 VDC/ 65 mA 6 mVpk-pk TYL 05-15W05 +15 VDC / 53 mA –15 VDC/ 53 mA 6 mVpk-pk TVL 05-1220 +12 VDC / 200 mA –12 VDC/ 200 mA 3 mVpk-pk TVL 05-1225 +12 VDC / 250 mA –12 VDC/ 125 mA 3 mVpk-pk 4.75 – 6 VDC TVL 05-1516 +15 VDC / 165 mA –15 VDC/ 165 mA 3 mVpk-pk TVL 05-1520 +15 VDC / 200 mA –15 VDC/ 100 mA 3 mVpk-pk www.tracopower.com Page 1 DC/DC Converter TYL/TVL Series 1.5-5 Watt Input Specifications Input current (no load) TYL models < 95 mA TVL models < 170 mA Input current (full load) TYL models 500 mA typ. TVL models 1’600 mA typ. Otput Specifications Voltage set accuracy ± 3 % Regulation – Input variation Vin min. to Vin max. TYL models: ± 0.3 % max. TVL models: ± 0.03 % max. – Load variation 0 – 100 % TYL models: ± 0.3 % max. TVL models: ± 0.18 % max. Ripple and noise (20 MHz Bandwidth) TYL models: 6 mVpk-pk max. TVL models: 3 mVpk-pk max. Temperature coefficient ± 0.02 % / °C Output current limitation >120 % of Iout max. Short circuit protection indefinite (automatic rcovery) General Specifications Temperature ranges – Operating – 25°C ... +71°C – Storage – 45°C ... +85°C Derating 3%/°C above 50°C Efficiency 60% (TVL 05-05W08: 45%) Humidity (non condensing) 30 – 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217 F) >1’000’000h @ + 25 °C Isolation voltage Input/Output 500 VDC Isolation capacity Input/Output 100 pF Isolation resistance Input/Output (500 VDC) > 10 M Ohm Switching frequency TYL models: 70 – 400 kHz depending on load TVL models: 50 – 300 kHz depending on load Vibration 5 to 10 Hz amplitude 10 mm pk-pk 10 to 55 Hz acceleration 2 G Shock acceleration 20 G max. time 11 ms All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 2 DC/DC Converter TYL/TVL Series 1.5-5 Watt Physical Specifications Case material Steel chrome-nickel plated Potting material Silicon rubber TSE (flammability to UL94V-0) Weight TYL models: 14 g (0.49 oz) TVL models: 31 g (1.09 oz) Soldering temperature max. 260 °C / 10 sec. Application Ripple an noise reduction to <2mVpk-pk Use external capacitores to reduce ripple an noise Single output models: +Vin +Vout TVL TYL C1: 47 µF/10V 10 µF/10V +Vin C2: 1 µF/16V 1 µF/16V C1 C2 C3 TYL / TVL = C3: 470 nF 470 nF Tantalum Ceramic low ESR type –Vin –Vin –Vout Dual output models: +Vin +Vout TVL TYL C2 C4 C1: 47 µF/10V 10 µF/10V TYL / TVL +Vin Ceramic C1 Tantalum C2+C3: 2.2 µF/16V 1 µF/16V Common = low ESR type C4+C5: 470 nF 470 nF C3 C5 –Vin Ceramic Tantalum –Vin –Vout All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 3 Load2 Load1 Load DC/DC Converter TYL/TVL Series 1.5-5 Watt Outline Dimensions mm (inches) TYL 24 1 Bottom TYL Pin-Out view 15 10 Pin Single Dual 12 13 1 –Vin (GND) –Vin (GND) 10 –Vout –Vout 1524 2.58 . 12 –Vout Common (0.1) (0.6) 13 +Vout Common 5 10.3 20.4 15 +Vout +Vout (0.8) (0.4) (0.2) 24 +Vin (Vcc) +Vin (Vcc) 5.08 (0.02) TVL Pin-Out 1 2 Pin Dual output TVL 1 +Vin (Vcc) Bottom view 2 –Vin (GND) 3 +Vout 3 5 4 1.8 4 Common (0.07) 5 –Vout 15.5 10.16 10.16 (0.61) (0.4) (0.4) 20.32 (0.8) 6 51.3 max 8 (0.24) (0.31) (2.02) Pin diameter ø 0.6 ±0.05 (0.023 ±0.002) Tolerances ±0.5 (0.02) Specifications can be changed without notice Rev. 12/00 Jenatschstrasse 1 • CH-8002 Zurich • Switzerland Tel. +41-1284 2911 • Fax +41-1201 1168 • e-mail: sales traco.ch • internet: http://www.tracopower.com Page 4 @ 32.6 (1.28) 51.3 max 2.33 27.94 (2.02) (1.1) (0.9) 20.32 15.5 22.86 5.08 (0.8) (0.61) (0.2) (0.9)