TRACO POWER TZL060-4812

DC/DC Converter TZL Series, 60 to 300 Watt Features ◆ Compact metal case with screw terminal block ◆ Wide 2:1 input range ◆ I/O isolation 1500VDC ◆ Input reverse polarity protection ◆ No minimum load required ◆ Soft start, low inrush current ◆ Overload and short circuit protection ◆ EMC compliance with EN 61000-6-1 and EN 50082-1 ◆ Adjustable output voltage ◆ 3-year product warranty This range of boxed DC/DC converter are designed for all applications, where high reliability and long lifetime are important. They provide excellent electric specifica- tions and full compliance to the European EMC and low voltage directive. Interna- tional safety approvals qualify these converter for worldwide use. With their low profile case and screw terminal block they are easy to install in any equipment. Models Order code Output power Input voltage Output voltage nom. Output current max. TZL 060-2412 12 VDC 5.0 A 18 - 36 VDC TZL 060-2424 24 VDC 2.5 A 60 Watt TZL 060-4812 12 VDC 5.0 A 36 - 72 VDC TZL 060-4824 24 VDC 2.5 A TZL 100-2412 12 VDC 8.5 A 19 - 36 VDC TZL 100-2424 24 VDC 4.2 A 100 Watt TZL 100-4812 12 VDC 8.5 A 36 - 72 VDC TZL 100-4824 24 VDC 4.2 A TZL 150-2412 12 VDC 12.5 A 19 - 32 VDC TZL 150-2424 24 VDC 6.3 A 150 Watt TZL 150-4812 12 VDC 12.5 A 36 - 72 VDC TZL 150-4824 24 VDC 6.3 A TZL 300-4812 12 VDC 26.7 A 300 Watt 36 - 72 VDC TZL 300-4824 24 VDC 13.4 A http://www.tracopower.com Page 1 of 5 Enclosed Power Supplies TZL Series 60–300 Watt Input Specifications Input current (at full load) 19 Vin 36 Vin TZL 060 models 4.6 A typ. 2.4 A typ. TZL 100 models 8.0 A typ. 4.0 A typ. TZL 150 models 12 A typ. 6.3 A typ. TZL 300 models -- 30 A typ. Recommended circuit breaker TZL 060 models 5 A (characteristic C) or slow blow fuse TZL 100 models 10 A TZL 150 models 15 A TZL 300 models 20 A Output Specifications Output voltage adjustment range ±10 % Regulation – Input variation 1 % max. – Load variation (10–100%) 1 % max. Minimum Load not required Ripple and noise (20 MHz bandwidth) 12 VDC output <100mVpk-pk 24 VDC output <150mVpk-pk Output current limitation 105 % – 150 % of Iout max. Overload protection mode Fold back, automatic recovery Over voltage protection (only output 1) 115 % – 140 % of Vout nom. Short circuit protection foldback, automatic recovery Capacitive load, max. TZL 060: 12 VDC / 24 VDC output models 11’000 µF / 2‘000 µF TZL 100: 12 VDC / 24 VDC output models 14’200 µF / 1‘000 µF TZL 150: 12 VDC / 24 VDC output models 8’600 µF / 470 µF TZL 300: 12 VDC / 24VDC output models 2’700 µF / 1‘000 µF General Specifications Temperature ranges – Operating –10°C to +60°C – Load derating above 50°C 2.5 %/K – Storage (non operating) –10°C to +75°C Temperature coefficient 0.03 %/°C Efficiency ~80 % (depending on model and load) Humidity (non condensing) 85 % rel max. (non condensing) Switching frequency 50 kHz typ. (pulse width modulation) Hold-up time 20 ms min. Isolation voltage (60sec.) – Input/Output 1‘500 VAC – Input/Case 1‘500 VAC – Output/Case 500 VAC Reliability /calculated MTBF (MIL-HDBK-217F, at+25°C, ground benign) >250’000 h Electromagnetic compatibility (EMC) EN 61000-6-1 Electromagnetic compatibility (EMC), radiated emission EN 55022, class B Casing material cover: nickel plated steel chassis: natural aluminium Environmental compliance – Reach www.tracopower.com/overview/tzl – RoHS RoHS directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 5 Enclosed Power Supplies TZL Series 60–300 Watt Case Dimensions TZL 060 Series 3 x M3 THD Connection 118 19 1 +Vin (4.65) (0.75) 2 –Vin 3 NC 10 max. 159 (6.26) 4 –Vout (0.39 max.) 5 –Vout 6 +Vout 1 1 Top view 2 7 +Vout 2 3 2 x M3 THD 3 4 (bottom) 4 5 6 5 7 6 8 7 9 Single output Dual & Triple output models 78 57 38 (0.95) (3.07) (1.50) Weight: 0.7 kg (25 oz) TZL 100 Series 3 x M3 THD Connection 1 +Vin 2 –Vin 158 (6.22) 20 3 NC (0.79) 4 –Vout 5 –Vout 10 max. 198 (7.80) 6 +Vout (0.39 max.) 7 +Vout 1 1 2 Top view 2 3 3 4 5 4 4 x M3 THD 6 5 (bottom) 7 6 8 7 9 Single output Dual & Triple 38 output models 120 (4.72) 16.5 (1.50) (0.45) Caution! Max mounting screw penetration: 3.0 mm (0.12) Weight: 0.8 kg (28 oz) Dimensions in [mm], () = Inch Tolerances ±0.8 (0.03) Monting hole pich tolerances ±0.5 (0.02) http://www.tracopower.com Page 3 of 5 9 80 (3.15) 18 32 18 (0.71) (0.35) (0.71) (1.26) 10 10 (0.39) (0.39) 95 95 19 19 (3.74) (3.74) (0.75) (0.75) Enclosed Power Supplies TZL Series 60–300 Watt Case Dimensions TZL 150 Series 6 x M4 THD 117 (4.61) 56 (2.20) 176.5 (6.95) 11.5 (0.45) 13 max. 198 (7.83) (0.51 max.) V adj. + + RC - - RS + Top view + Vout 4 x M3 THD (bottom) N NC 2 x M4 thread –V Lin (bottom) +Vin 65 (2.56) 63 (2.48) 50 (1.97) 168 (6.61) 10 (0.39) Caution! Max mounting screw penetration: 3.0 mm (0.12) Weight: 0.89 kg ( 31 oz) Dimensions in [mm], () = Inch Tolerances ±0.8 (0.03) Monting hole pich tolerances ±0.5 (0.02) http://www.tracopower.com Page 4 of 5 21 (0.83) 10 28 12.5 12.5 (0.39) (1.10) (0.49) (0.49) 79 (3.11) 25 (0.98) 49.5 (1.95) 99 (3.9) Enclosed Power Supplies TZL Series 60–300 Watt Outline Dimensions TZL 300 Series 4 x M4 THD 150 ±0.8 29.5 (5.91 ±0.03) (1.16) 12 max. 212 (8.35) (0.47 max.) 150 (5.91) 29.5 (1.16) V adj. + RC - - RS + + + + Vout 4 x M4 THD (bottom) 5 x M3 THD N NC (bottom) L –Vin +Vin 87.5 (3.44) 50 (1.97 ) 177.5 (6.99) 7 (0.28) Weight: 1.05 kg (37 oz) Caution! Max mounting screw penetration: 3.0 mm (0.12) Dimensions in [mm], () = Inch Tolerances ±0.8 (0.03) Monting hole pich tolerances ±0.5 (0.02) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. June 23. 2015 www.tracopower.com Page 5 of 5 air flow 54.5 12.5 25 ±0.8 (2.15) (0.49) (0.98 ±0.03) 10 95 (3.74) (0.39) 32.5 50 (1.97) (1.28) 115 (4.53)