TT ELECTRONICS 3N263
Specifications
Manufacturer
TT electronics
Manufacturers Part #
3N263
Industry Aliases
3N263
Sub-Category
Transistor and Photovoltaic Output PhotoCouplers
Brand
Optek Technology
Packaging
Box
Factory Pack Quantity
1
Datasheet
Extracted Text
Sensing and Control Hi-Reliability Optically Coupled Isolator 3C91C, 3C92C, 3N243, 3N244, 3N245, 3N261, 3N262, 3N263 (TX, TXV) Features: • TO-72 herme�cally sealed package • 1 kVDC electrical isola�on • High current transfer ra�o • TX and TXV devices processed to MIL-PRF-19500 DescripƟon: Each device is a high reliability op�cally coupled isolator that consists of an infrared em� i ng diode and a NPN silicon phototransistor which are mounted in a herme�cally sealed TO-72 package. The 3C91C and 3C92C have a 935 nm wavelength, whereas the 3N243, 3N244, 3N245, 3N261, 3N262 and 3N263 have an 880 nm wavelength. All devices have 0.50” (12.70 mm) leads. Electrical characteris�cs vary. The3N 261TX, 3N262TX and 3N263TX devices are similar to JEDEC registered op� cally coupled isolators. TX and TXV devices are processed to OPTEK’s military screening program paƩerned aŌer MIL-PRF-19500. Please refer to ApplicaƟon BulleƟns 208 and 210 for addiƟonal design informaƟon and reliability (degradaƟon) data. Contact your local representa�ve or OPTEK for more informa�on. ApplicaƟons: LED IsolaƟon V (V) CE Part Peak Voltage CTR I (mA) Typ / Lead • High-voltage isola�on F Number Wavelength Sensor (,000) Min / Max Typ / Max Max Length between input and output 3C91C (TX, TXV) 935 nm 0.3 / 2.0 10 / 50 10 / 50 • Electrical isola�on in 3C92C (TX, TXV) dirty environments 3N243 (TX, TXV) 0.15 / NA • Industrial equipment 3N244 (TX, TXV) 0.3 / NA 3 / 40 10 / 30 Transistor 1 0.50" • Medical equipment 3N245 (TX, TXV) 0.6 / NA 880 nm • Office equipment 3N261 (TX, TXV) .05 / NA 3N262 (TX, TXV) 1.0 / 5.0 1 / 40 5 / 30 3C91 3N263 (TX, TXV) 2.0 / 10.0 1 2 3C92 Phototransistor Collector is connected to the Header-Base-Case for ALL versions 3 1 3N2XX BoƩom 3 2 View 4 3 4 2 4 1 Pin # 3C91 3C92 3N2XX 1 Cathode Cathode Emi� er [ MILLIMETERS ] 2 Collector Emi�er Cathode DIMENSIONS ARE IN: INCHES 3 Emi�er Collector Collector 4 Anode Anode Anode General Note TT Electronics reserves the right to make changes in product speciŢcaƟon 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 without noƟce or liability. All informaƟon is subject to TT Electronics’ own data www.optekinc.com | www.� electronics.com and is considered accurate at Ɵme of going to print. Issue A.4 06/2015 Page 1 © TT electronics plc Sensing and Control Hi-Reliability Optically Coupled Isolator 3C91C, 3C92C, 3N243, 3N244, 3N245, 3N261, 3N262, 3N263 (TX, TXV) Absolute Maximum RaƟngs (T = 25° C unless otherwise noted) A o o Opera� ng Temperature Range -55 C to +125 C o o Storage Temperature Range -65 C to +150 C (1) Input to Output Isola� on Voltage ± 1 kVDC (2) Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron] 260° C Input Diode Forward DC Current 40 mA Reverse Voltage 2.0 V (3) Power Dissipa� on 60 mW Output Phototransistor Con� nuous Collector Current 30 mA Collector-Emi� er Voltage 30 V Emi� er-Collector Voltage 5.0 V (4) Power Dissipa� on 200 mW Notes: 1. Measured with input leads shorted together and output leads shorted together. 2. RMA ţux is recommended. Dura� on can be extended to 10 seconds maximum when ţow soldering. 3. Derate linearly 2.0 mW/° C above 25° C. 4. Derate linearly 0.60 mW/° C above 65° C. I vs T C(ON) A 2.5 Normalized @ 20 mA and 25° C 2.0 I = 50mA F 1.5 1.0 I = 20mA F 0.5 0.0 -55 -35 -15 +5 +25 +45 +65 +85 +105 +125 +135 T (°C) A General Note TT Electronics reserves the right to make changes in product speciŢcaƟon 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 without noƟce or liability. All informaƟon is subject to TT Electronics’ own data www.optekinc.com | www.� electronics.com and is considered accurate at Ɵme of going to print. Issue A.4 06/2015 Page 2 © TT electronics plc I (mA) C(ON) Sensing and Control Hi-Reliability Optically Coupled Isolator 3C91C, 3C92C, 3N243, 3N244, 3N245, 3N261, 3N262, 3N263 (TX, TXV) Electrical CharacterisƟcs (T = 25°C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode Forward Voltage 3C91C, 3C92C (TX, TXV) - - 1.2 I = 2 mA F 3C91C, 3C92C (TX, TXV) - - 1.5 I = 50 mA F 3N243, 3N244, 3N245 (TX, TXV) 0.8 - 1.3 I = 10 mA F V 3N243, 3N244, 3N245 (TX, TXV) 1.0 - 1.5 V I = 10 mA, T = -55° C F F A 3N243, 3N244, 3N245 (TX, TXV) 0.7 - 1.2 I = 10 mA, T = -100° C F A 3N261, 3N262, 3N263 (TX, TXV) 0.8 - 1.5 I = 10 mA F I = 10 mA, T = -55° C 3N261, 3N262, 3N263 (TX, TXV) 1.0 - 1.7 F A I = 10 mA, T = -100° C 3N261, 3N262, 3N263 (TX, TXV) 0.7 - 1.3 F A Reverse Voltage V V R 3C91C, 3C92C (TX, TXV) 7 - - I = 0.1 mA R Reverse Current 3C91C, 3C92C (TX, TXV) - - 1 V = 3.0 V R I µA R 3N243, 3N244, 3N245 (TX, TXV) - - 100 V = 2.0 V R 3N261, 3N262, 3N263 (TX, TXV) - - 100 V = 2.0 V R Diode Capacitance C pF IN 3C91C, 3C92C (TX, TXV) - 25 - V = 0, f = 1 MHz Output Phototransistor Collector-Emi� er Breakdown Voltage 3C91C, 3C92C (TX, TXV) 50 - - I = 10.0 mA C V (BR)CEO V 3N243, 3N244, 3N245 (TX, TXV) 30 - - I = 1.0 mA C 3N261, 3N262, 3N263 (TX, TXV) 40 - - I = 1.0 mA C Emi� er-Collector Breakdown Voltage 3C91C, 3C92C (TX, TXV) 7 - - I = 10 µA C V V (BR)ECO 3N243, 3N244, 3N245 (TX, TXV) 5 - - I = 100 µA E 3N261, 3N262, 3N263 (TX, TXV) 7 - - I = 100 µA E Collector Dark Current 3C91C, 3C92C (TX, TXV) - - 10 nA V = 5 V CE 3C91C, 3C92C (TX, TXV) - - 50 nA V = 50 V CE I 3N243, 3N244, 3N245 (TX, TXV) - - 100 nA V = 10.0 V CEO CE 3N243, 3N244, 3N245 (TX, TXV) - - 100 µA V = 10.0 V, T = 100° C CE A 3N261, 3N262, 3N263 (TX, TXV) - - 100 µA V = 10.0 V CE 3N261, 3N262, 3N263 (TX, TXV) - - 100 µA V = 10.0 V, T = 100° C CE A General Note TT Electronics reserves the right to make changes in product speciŢcaƟon 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 without noƟce or liability. All informaƟon is subject to TT Electronics’ own data www.optekinc.com | www.� electronics.com and is considered accurate at Ɵme of going to print. Issue A.4 06/2015 Page 3 © TT electronics plc Sensing and Control Hi-Reliability Optically Coupled Isolator 3C91C, 3C92C, 3N243, 3N244, 3N245, 3N261, 3N262, 3N263 (TX, TXV) Electrical CharacterisƟcs (T = 25°C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Coupled On-State Collector Current 3C91C, 3C92C (TX, TXV) 4.0 - - I = 10 mA , V = 5 V F CE 3C91C, 3C92C (TX, TXV) 3.0 - 20 I = 10 mA , V = 0.4 V F CE 3N243 (TX, TXV) 1.5 - - I = 10 mA , V = 10.0 V F CE 3N243 (TX, TXV) 0.3 - - I = 3 mA , V = 10.0 V F CE 3N243 (TX, TXV) 0.5 - - I = 10 mA , V = 10.0 V, T = 55° C F CE A 3N243 (TX, TXV) 0.5 - - I = 10 mA , V = 10.0 V, T = 100° C F CE A 3N244 (TX, TXV) 3.0 - - I = 10 mA , V = 10.0 V F CE 3N244 (TX, TXV) 0.8 - - I = 3 mA , V = 10.0 V F CE 3N244 (TX, TXV) 1.0 - - I = 10 mA , V = 10.0 V, T = 55° C F CE A 3N244(TX, TXV) 1.0 - - I = 10 mA , V = 10.0 V, T = 100° C F CE A 3N245 (TX, TXV) 6.0 - - I = 10 mA , V = 10.0 V F CE I mA C(ON) 3N245 (TX, TXV) 1.5 - - I = 3 mA , V = 10.0 V F CE 3N245(TX, TXV) 1.5 - - I = 10 mA , V = 10.0 V, T = 55° C F CE A 3N245(TX, TXV) 1.5 - - I = 10 mA , V = 10.0 V, T = 100° F CE A 3N261(TX, TXV) 0.5 - - I = 1 mA , V = 5.0 V F CE 3N261 (TX, TXV) 0.7 - - I = 2.0 mA , V = 5.0 V, T = 55° C F CE A 3N261 (TX, TXV) 0.5 - - I = 2.0 mA , V = 5.0 V, T = 100° C F CE A 3N262 (TX, TXV) 1.0 - 5 I = 1 mA , V = 5.0 V F CE 3N262(TX, TXV) 1.4 - - I = 2.0 mA , V = 5.0 V, T = 55° C F CE A 3N262 (TX, TXV) 1.0 - - I = 2.0 mA , V = 5.0 V, T = 100° C F CE A 3N263 (TX, TXV) 2.0 - 10 I = 1 mA , V = 5.0 V F CE 3N263(TX, TXV) 2.8 - - I = 2.0 mA , V = 5.0 V, T = 55° C F CE A 3N263(TX, TXV) 2.0 - - I = 2.0 mA , V = 5.0 V, T = 100° C F CE A Collector-Emi� er Satura� on Voltage 3C91C, 3C92C (TX, TXV) - - 0.4 I = 50 mA , I = 10 mA F C 3N243, 3N244, 3N245 (TX, TXV) - - 0.3 I = 20 mA , I = 1.50 mA F C 3N243, 3N244, 3N245 (TX, TXV) - - 0.3 I = 20 mA , I = 3.0 mA F C V V CE(SAT) 3N243, 3N244, 3N245 (TX, TXV) 3N261, - - 0.3 I = 20 mA , I = 6.0 mA F C 3N262, 3N263 (TX, TXV) - - 0.3 I = 2.0 mA , I = 0.50 mA F C 3N261, 3N262, 3N263 (TX, TXV) - - 0.3 I = 2.0 mA , I = 1.0 mA F C 3N261, 3N262, 3N263 (TX, TXV) - - 0.3 I = 2.0 mA , I = 2.0 mA F C Turn-on Time t µs ON 3C91C, 3C92C (TX, TXV) - - 9 V = 5 V, I = 2 mA, R = 100 Ω CC C L Turn-off Time t µs IOFF 3C91C, 3C92C (TX, TXV)) - - 6 V = 5 V, I = 2 mA, R = 100 Ω CC C L General Note TT Electronics reserves the right to make changes in product speciŢcaƟon 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 without noƟce or liability. All informaƟon is subject to TT Electronics’ own data www.optekinc.com | www.� electronics.com and is considered accurate at Ɵme of going to print. Issue A.4 06/2015 Page 4 © TT electronics plc Sensing and Control Hi-Reliability Optically Coupled Isolator 3C91C, 3C92C, 3N243, 3N244, 3N245, 3N261, 3N262, 3N263 (TX, TXV) Electrical CharacterisƟcs (T = 25°C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Coupled Input-to-Output Capacitance 3C91C, 3C92C (TX, TXV) - 2 2.5 f = 1 MHz C pF IO (1) 3N243, 3N244, 3N245 (TX, TXV) 3N261, - - 5.0 V = 0 V, f = 1.00 MHz IO (1) 3N262, 3N263 (TX, TXV) - - 5.0 V = 0 V, f = 1.00 MHz IO Leakage Input -to-Output (1) I 3N243, 3N244, 3N245 (TX, TXV) 3N261, - - 100 nA V = ± 1.00 kVDC IO IO (1) 3N262, 3N263 (TX, TXV) - - 10 V = ± 1.00 kVDC IO Isola� on Resistance R Ω IO 9 3C91C, 3C92C (TX, TXV) 10 - - V = +1 kV IO Output Rise Time (2) 3N243, 3N244, 3N245 (TX, TXV) - - 10 V = 10.0 V, I = 10.0 mA, R = 100 Ω V = CC F L CC t µs (2) r 10.0 V, I = 5.0 mA, R = 100 Ω 3N261, 3N262 (TX, TXV) - - 20 F L (2) V = 10.0 V, I = 5.0 mA, R = 100 Ω 3N263 (TX, TXV) - - 25 CC F L Output Fall Time (2) 3N243, 3N244, 3N245 (TX, TXV) - - 10 V = 10.0 V, I = 10.0 mA, R = 100 Ω V = CC F L CC t µs f (2) 3N261, 3N262 (TX, TXV) - - 10 10.0 V, I = 5.0 mA, R = 100 Ω F L (2) V = 10.0 V, I = 5.0 mA, R = 100 Ω 3N263 (TX, TXV) - - 25 CC F L Notes: 1. Measured with input leads shorted together and output leads shorted together. 2. The input waveform is supplied by a generator with the following characteris� cs: Z = 50 Ω, t ≤ 15 ns, duty cycle ~ 1%, pulse width ~ 100 ms OUT r I vs I vs T V vs I vs T C(ON) F A F F A 1.50 2.5 1.40 1.30 2.0 1.20 1.10 1.5 1.00 -55 -35 0.90 1.0 -15 -55 +5 -35 0.80 +25 -15 +45 +5 +25 0.70 +65 0.5 +45 +85 +65 +105 +85 0.60 +105 +125 +125 +135 +135 0.50 0.0 0 1020 304050 0 1020 3040 50 I (mA) I (mA) F F General Note TT Electronics reserves the right to make changes in product speciŢcaƟon 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 without noƟce or liability. All informaƟon is subject to TT Electronics’ own data www.optekinc.com | www.� electronics.com and is considered accurate at Ɵme of going to print. Issue A.4 06/2015 Page 5 © TT electronics plc V (V) F I (mA) C(ON)
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the 3N263?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods