628A511 - TT ELECTRONICS - Electronics Finder

Description

Res Thick Film NET 510 Ohm 2% 1.28W ±100ppm/C ISOL Molded 16-Pin DIP Gull Wing SMD Magazine
628A511

Part Number

628A511

Price

Request Quote

Manufacturer

TT ELECTRONICS

Lead Time

Request Quote

Category

Resistors » Resistor Networks and Arrays

Specifications

Manufacturer

TT electronics

Manufacturers Part #

628A511

Industry Aliases

628A511

Sub-Category

Resistor Networks and Arrays

Brand

BI Technologies

Packaging

Magazine

Factory Pack Quantity

Datasheet

628.pdf

398 KiB

Download

Extracted Text

Resistors Model 628 Model 628 Series • .220” Small Outline • Dual-In-Line • Thick Film • Surface Mount • Resistor Networks • RoHS Compliant All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) Electrical Standard Resistance Range, Ohms 10 to 1Meg (Plus “0” Ohm Jumper) ±2%(<33Ω = ±1 Ohm) Standard Resistance Tolerance, at 25°C (Optional: F Tol. = ±1%) Operating Temperature Range -55°C to +125°C Temperature Coefficient of Resistance ±100ppm/°C (<100Ω = ±250ppm/°C) Temperature Coefficient of Resistance, Tracking ±50ppm/°C Maximum Operating Voltage 50Vdc or √PR Insulation Resistance ≥10,000 Megohms Environmental Thermal Shock plus Power Conditioning ΔR 0.70% Short Time Overload ΔR 0.25% Moisture Resistance ΔR 0.50% Mechanical Shock ΔR 0.25% Vibration ΔR 0.25% Low Temperature Operation ΔR 0.25% High Temperature Exposure ΔR 0.50% Load Life, 2000 Hours (≤330Ω = ±0.5 Ohm) ΔR 0.50% Resistance to Solder Heat (Total Immersion in solder at 280°C for 10 sec.) ΔR 0.25% Dielectric Withstanding Voltage 200V for 1 minute Temperature Exposure, Maximum 215°C for 3 minutes Marking Permanency MIL-STD-202, Method 215 Lead Solderability MIL-STD-202, Method 208 Flammability UL-94V-0 Rated Storage Temperature Range –55°C to +150°C General Note BI Technologies IRC Welwyn TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. www.ttelectronicsresistors.com © TT Electronics plc 05.16 Model 628 Model 628 Series Mechanical Lead Material 96-96.5%Sn, 3.5-4%Ag Lead Configuration Gull Wing Lead Coplanarity ±0.002 in. (0.051mm) Substrate Material Alumina Resistor Material Cermet Body Material Epoxy Standard Resistance Values, Ohms A Circuit (Isolated Resistors) B Circuit (Bussed Resistors) Bold type represents stock standard values for ‘A’ Circuit Bold type represents stock standard values for ‘B’ Circuit Ohms Code Ohms Code Ohms Code Ohms Code Ohms Code Ohms Code 22 220 1.2K 122 39K 393 22 220 1.2K 122 39K 393 33 330 1.5K 152 47K 473 33 330 1.5K 152 47K 473 39 390 1.8K 182 56K 563 39 390 1.8K 182 56K 563 47 470 2K 202 68K 683 47 470 2K 202 68K 683 56 560 2.2K 222 82K 823 56 560 2.2K 222 82K 823 68 680 2.7K 272 100K 104 68 680 2.7K 272 100K 104 82 820 3.3K 332 120K 124 82 820 3.3K 332 120K 124 100 101 3.9K 392 150K 154 100 101 3.9K 392 150K 154 120 121 4.7K 472 180K 184 120 121 4.7K 472 180K 184 150 151 5.6K 562 220K 224 150 151 5.6K 562 220K 224 180 181 6.8K 682 270K 274 180 181 6.8K 682 270K 274 220 221 8.2K 822 330K 334 220 221 8.2K 822 330K 334 270 271 10K 103 390K 394 270 271 10K 103 390K 394 330 331 12K 123 470K 474 330 331 12K 123 470K 474 390 391 15K 153 560K 564 390 391 15K 153 560K 564 470 471 18K 183 680K 684 470 471 18K 183 680K 684 560 561 20K 203 820K 824 560 561 20K 203 820K 824 680 681 22K 223 1 Meg 105 680 681 22K 223 1 Meg 105 820 821 27K 273 820 821 27K 273 1K 102 33K 333 1K 102 33K 333 J Circuit (Dual Terminators) Ohms (R1/R2) Code (R1/R2) Marking Ohms (R1/R2) Code (R1/R2) Marking 120/120 121/121 45 330/470 331/471 10 150/150 151/151 40 390/390 391/391 42 180/300 181/301 31 470/470 471/471 43 220/220 221/221 39 1K/3.3K 102/332 35 220/330 221/331 08 3K/6.2K 302/662 13 270/270 221/331 41 6.8K/22K 682/223 29 330/390 331/391 09 - - - General Note BI Technologies IRC Welwyn TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. www.ttelectronicsresistors.com © TT Electronics plc 05.16 Model 628 Model 628 Series MODELS627,628 MODELS627,628 MODELS627,628  Outline Dimensions (Inch/mm)   .445 .090   Max. 11.30 2.29 .445 .090   Max. 11.30 .445 2.29.090   Max. .395 11.30 2.29   10.03 .395   .395 10.03   10.03 .028 Typ. 0.71 .028 Typ. .028 Typ. 0.71 0.71 .310 Max. .220±.005 .008±.005 7.87 .310 .310 5.59±0.13 0.20±0.13 Max. .220±.005 .008±.005 Max. .220±.005 .008±.005 7.87 7.87 5.59±0.13 0.20±0.13 5.59±0.13 0.20±0.13 .016 .050 .016 .050 Typ. Typ. Typ. Typ. 0.41 1.27 0.41 1.27 .016 .050 Typ. Typ. .008 .008 0.41 1.27 Typ. Typ. 0.0.20 20 .008 Typ. 0.20 Note: Maximum allowable mold excursion = 0.006”      Schematics                  N N N  N N N N N N R1 R1 RR12 R2 R2 1 N/2 1 N/2 1 N/2 1 N/2 1 N/2 1 N/2 1 N/2 1 N/2 1 N/2 Note: Model 628: N = 16 Leads    Solder Pad Layout (Inch/mm)   .030±.005  .050 Typ. 1.27 0.76±0.13 .050 .030±.005 Typ. 1.27 0.76±0.13 .030±.005 .050 Typ. 0.76±0.13 1.27 .220±.010 .315 Min. 5.59±0.25 8.00 .220±.010 .315 Min. 5.59±0.25 8.00 .220±.010 .315 Min. 5.59±0.25 8.00 .045±.005 1.14±0.13 .045±.005 Glenrothes,FifeKY74NX,UK 1.14±0.13 .045±.005 Telephone:+44(0)1592662200•Facsimile:+44(0)1592662299•Website:www.bitechnologies.com•Email:sales@bitechnologies.co.uk 627,628SeriesIssueNov2008 1.14±0.13 General Note BI Technologies IRC Welwyn TT Electronics reserves the right to make changes in product specification without notice or liability. All inf ormation is sub ject to TT Electronics’ own dat Glenrothea and is considered accur s,FifeKY74NX,UK ate at time of going to print. www.ttelectronicsresistors.com 627,628SeriesIssueNov2008 Telephon e:+44(0)1592 662200 •GlFacensroimthilee:s,+F44ife(0)KY17592 4N6X62299 ,UK •Website:www.bitechnologies.com•Email:sales@bitechnologies.co.uk Telephone:+44(0)1592662200•Facsimile:+44(0)1592662299•Website:www.bitechnologies.com•Email:sales@bitechnologies.co.uk 627,628SeriesIssueNov2008 © TT Electronics plc 05.16 Model 628 Model 628 Series MODELS627,628 Typical Part Marking       628A330 8A330  —Resistor(PerCircuit)— 628A331 8A331 Manufacturer’sTrademark 628J221/331 8J08      DateCode 627 1.28 0.32 0.16 0.16 PartMarking 628 1.28 0.32 0.16 0.16 Lead#1Indicator  Power Dissipation, Watts At 70°C  Tape&Reel — Resistor (Per Circuit) —   ConformstorequirementsofEIA481.    Allunitsorientatedwithlead#1totheleftofdirectionoffeed. Model Package A B J 628 1.28 0.32 0.16 0.16   Tape: Width=24mm    Pocket=EmbossedPlastic,Antistatic    Pitch=12mm     Reel: Diameter=13”(300mm)Maximum Packaging    Capacity=2,000Units Tape & Reel     Standard: Conforms to requirements of EIA-481. All units orientated with lead #1 to the left of direction of feed.   Magazines  Width = 24mm    ConformstoEIAandJEDECstandards.  Tape Pocket = Embossed Plastic, Antistatic Pitch = 12mm    Allunitsorientatedwithlead#1tothesameside.  Diameter = 13” (300mm) Maximum Reel:     Capacity = 2,000 Units  Mag Ma azines gazine:Capacity=50Units  Option: Conforms to EIA and JEDEC standards.     All units orientated with lead #1 to the same side. Magazine: Magazine: Capacity = 50 Units General Note BI Technologies IRC Welwyn TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. www.ttelectronicsresistors.com Glenrothes,FifeKY74NX,UK © TT Electronics plc Telephone:+44(0)1592662200•Facsimile:+44(0)1592662299•Website:www.bitechnologies.com•Email:sales@bitechnologies.co.uk 627,628SeriesIssueNov2008 05.16 Model 628 Model 628 Series Applicable Documents MIL-R-914 - Resistor Networks, Fixed, Film, Surface Mount Established Reliability General Specifications MIL-STD-105 - Sampling Procedures and Tables for Inspection by Attributes MIL-STD-202 - Test Methods for Electronics and Electrical Component Parts EIA-481 - Carrier Taping of Surface Mount Components for Automatic Handling EIA-PDP-100 - SOGN-0002 Outline Dimensions Ordering Information 62 8 J 331 / 471 F TR4 Model Standard Tape & Reel Packaging: (No code used for magazines.) Number of Leads: 7 = 14 Leads Tolerance Code: 8 = 16 Leads F = ±1% (No code used for 2% Std.) Circuit Type: A = Isolated R2 Resistance Code: B = Bussed (Add for J Circuit only.) J = Dual Terminator Resistance Code: E12 & E24 Series: First two digits are significant. Last digit denotes number of trailing zeros. E96 Series: First three digits are significant. Last digit denotes number of trailing zeros. General Note BI Technologies IRC Welwyn TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. www.ttelectronicsresistors.com © TT Electronics plc 05.16

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products