Electronics Finder Manufacturers T TT ELECTRONICS L063C510LF
About product Specifications Datasheet FAQ

TT ELECTRONICS L063C510LF

Image of TT ELECTRONICS L063C510LF

Description

Res Thick Film NET 51 Ohm 2% 0.6W ±250ppm/C ISOL Conformal Coated 6-Pin SIP Pin Thru-Hole Bulk
L063C510LF

Part Number

L063C510LF

Price

Request Quote

Manufacturer

TT ELECTRONICS

Lead Time

Request Quote

Category

Resistors »  Resistor Networks and Arrays

Specifications

Manufacturer

TT electronics

Manufacturers Part #

L063C510LF

Industry Aliases

L063C510LF

Sub-Category

Resistor Networks and Arrays

Selling Alternatives

L063C510

Brand

BI Technologies

Packaging

Bulk

Factory Pack Quantity

1

Datasheet

pdf file

L.pdf

201 KiB

Extracted Text

Resistors Make Possible SIL Resistor Network L Series Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) Electrical Standard Resistance Range, Ohms 1%: 22R - 1M; 2%:10R - 5M6; 5%: 10R - 10M ±2% Standard Resistance Tolerance, at 25°C Optional: ±1% (F Tol.), ±5% (J Tol.) Operating Temperature Range -55°C to +125°C Temperature Coefficient of Resistance ±100ppm/°C (<50 Ohms = ±250ppm/°C) Temperature Coefficient of Resistance, Tracking ±50ppm/°C Maximum Operating Voltage 100Vdc or √PR Insulation Resistance ≥10,000 Megohms Environmental Thermal Shock plus Power Conditioning ΔR 0.70% Short Time Overload ΔR 0.25% Terminal Strength ΔR 0.25% Moisture Resistance ΔR 0.50% Mechanical Shock ΔR 0.25% Vibration ΔR 0.25% Low Temperature Storage ΔR 0.25% High Temperature Exposure ΔR 0.50% Load Life, 1,000 Hours ΔR 1.00% Resistance to Solder Heat (Per MIL-STD-202, Method 210, Cond.B) ΔR 0.25% Dielectric Withstand Voltage 200V for 1 minute Marking Permanency MIL-STD 202, Method 215 Lead Solderability MIL-STD 202, Method 208 Flammability UL-94V-O Rated Storage Temperature Range -55°C to +150°C Specifications subject to change without notice. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. www.ttelectronicsresistors.com © TT Electronics plc 10.14 SIL Resistor Network Make Possible L Series Mechanical Lead Finish SnAgCu Substrate Material Alumina Resistor Material Cermet Body Material Conformal Epoxy Resin, red or black Standard Resistance Values, Ohms Power Derating Curve -3 Circuit (Isolated Resistors) & -1 Circuits (Bussed Resistors) Ohms Code Ohms Code Ohms Code 22 220 820 821 33K 333 27 270 1K 102 39K 393 33 330 1.2K 122 47K 473 39 390 1.5K 152 51K 513 47 470 1.8K 182 56K 563 51 510 2K 202 68K 683 56 560 2.2K 222 82K 823 68 680 2.7K 272 100K 104 100 82 820 3.3K 332 120K 124 80 60 100 101 3.9K 392 150K 154 Percent of 40 Rated Power 120 121 4.7K 472 180K 184 20 0 150 151 5.1K 512 200K 204 180 181 5.6K 562 220K 224 -0 70 125 150 Degrees C 200 201 6.8K 682 270K 274 220 221 8.2K 822 330K 334 270 271 10K 103 390K 394 330 331 12K 123 470K 474 390 391 15K 153 510K 514 470 471 18K 183 560K 564 510 511 20K 203 680K 684 560 561 22K 223 820K 824 680 681 27K 273 1Meg 105 -5 Circuit (Dual Terminators) Power Dissipation, Watts At 70°C Ohms Code Ohms Code Ohms Code — Resistor (Per Circuit) — R1/R2 R1/R2 R1/R2 R1/R2 R1/R2 R1/R2 Model Package -1 -3 -5 180/390 181/391 330/390 331/391 3K/6.2K 302/622 L06 .6 .125 .200 .125 220/270 221/271 330/470 331/471 - - L08 .8 .125 .200 .125 220/330 221/331 330/680 331/681 - - L10 1.0 .125 .200 .125 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. www.ttelectronicsresistors.com © TT Electronics plc 10.14 SIL Resistor Network Make Possible L Series Outline Dimensions (Inch/mm) .098 “L” Max. Max. 2.5 .200 5.08 .140 ± .020 Max. 3.56 ± 0.51 .012 ± .003 .100 ± .005 .020 ± .004 0.31 ± 0.08 2.54 ± 0.13 0.51 ± 0.10 Centered Pitch. Non- on Package No. of Leads Accumulative # of Leads 4 5 6 7 8 9 10 11 12 13 14 Dim. “L” .40 .50 .60 .70 .80 .90 1.00 1.10 1.20 1.30 1.40 Max. 10.16 12.70 15.24 17.78 20.32 22.86 25.40 27.94 30.48 33.02 35.56 Schematics -3 Circuit -1 Circuit Isolated Resistors Bussed Resistors 12 34 n 12 34 n -5 Circuit Dual Terminator R2 R1 12 34 n General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. www.ttelectronicsresistors.com © TT Electronics plc 10.14 SIL Resistor Network Make Possible L Series Typical Part Marking 4 Leads Only Lead #1 Indicator Logo Date B 104 L 8 3 S 103 Date Code Code Model Lead #1 Indicator Resistance Code Series Resistance Code Logo Circuit Type & I.D. Code Number Circuit Type Of Leads Packaging 4 -10 pins: 200 per bag, 1000 per box Standard: Bulk: Quantity = 11 -14 pins: 100 per bag, 500 per box Tape in Ammo Box (4 - 10 pins only). All Units oriented with lead #1 to the left of direction of feed. Width = 18mm Option: Tape: Pitch = 12.7mm Ammo Box: Capacity = 1,000 units per box. 12,000 units per carton General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. www.ttelectronicsresistors.com © TT Electronics plc 10.14 SIL Resistor Network Make Possible L Series Ordering Information L 08 5 S 331 / 471 F LF XX 3T = Ammo Pack, 3 leads only attached to tape.* Model Series M1 or M2 = Tube ** Number of Leads: (No code used for standard bulk packaging.) 4 thru 14 Circuit Type: LF: RoHS Compliant 3 = Isolated 1 = Bussed Tolerance Code: 5 = Dual Terminator F = ±1% J = ±5% (No code used for 2% standard.) R2 Resistance Code: (Add for -5 circuit only) Resistance Code: First 2 digits are significant. Last digit denotes number of trailing zeros. For "F" tolerance first 3 digits are significant. Fourth digit denotes number of trailing zeros. * Refer to Packaging for Automation section (Page A-3) for Ammo Pack capacity and dimensions. ** Refer to Packaging for Automation section (Page A-4) for M1 and M2 tube capacity and dimensions. Applicable Documents MIL-R-83401 — Resistor Networks, Fixed, Film, General Specifications MIL-STD-105 — Sampling Procedures and Tables for Inspection by Attributes MIL-STD-202 — Test Methods for Electronic and Electrical Component Parts General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. www.ttelectronicsresistors.com © TT Electronics plc 10.14

Frequently asked questions

How does Electronics Finder differ from its competitors?

chervon down
Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

Is there a warranty for the L063C510LF?

chervon down
The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

Which carrier will Electronics Finder use to ship my parts?

chervon down
We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Can I buy parts from Electronics Finder if I am outside the USA?

chervon down
Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Which payment methods does Electronics Finder accept?

chervon down
Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

product

Res Thick Film NET 100 Ohm 2% 1.28W ??100ppm/??C ISOL Molded 14-Pin DIP Gull Wing SMD Magazine 627A1...

product

Res Thick Film NET 100 Ohm 2% 1.28W ±100ppm/C ISOL Molded 14-Pin DIP Gull Wing SMD T/R 627A101TR4

product

Res Thick Film NET 1K Ohm 2% 1.28W ±100ppm/C ISOL Molded 14-Pin DIP Gull Wing SMD Magazine 627A102

product

Res Thick Film NET 1K Ohm 2% 1.28W ??100ppm/??C ISOL Molded 14-Pin DIP Gull Wing SMD T/R 627A102TR4

product

Res Thick Film NET 10K Ohm 2% 1.28W ±100ppm/C ISOL Molded 14-Pin DIP Gull Wing SMD Magazine 627A103

product

Res Thick Film NET 10K Ohm 2% 1.28W ±100ppm/C ISOL Molded 14-Pin DIP Gull Wing SMD T/R 627A103TR4