TT ELECTRONICS OPB702RR
Specifications
Manufacturer
TT electronics
Manufacturers Part #
OPB702RR
Lead Time
10 Week Lead Time
Industry Aliases
OPB702RR
Sub-Category
Photointerrupters
Brand
Optek Technology
Packaging
Bulk
Factory Pack Quantity
100
Datasheet
Extracted Text
Focused for maximum sensitivity Choice of phototransistor, photodarlington or base-emitter resistor Low cost plastic housing The OPB702 series consists of an infrared Light Emitting Diode (LED) or red Visible Light Emitting Diode (VLED) and the choice of a NPN silicon phototransistor (OPB702), a photodarlington (OPB702D) or a base-emitter resistor for low light suppression (OPB702R, OPB702RR). On each sensor, the LED and the phototransistor, photodarlington or base-emitter resistor are mounted side-by-side on converging optical axes in a black plastic housing. The OPB702 uses type OP505 sensor, the OPB702D uses an OP535 sensor and the OPB702R, OPR702RR uses an OP705 sensor. Custom electrical, wire, cabling and connectors are available. Contact your local representative or OPTEK for more information. Ordering Information Non-contact reflective object sensor Reflection Assembly line automation Part LED Peak Distance Lead Length / Machine automation Number Wavelength Sensor Inch (mm) Spacing Machine safety OPB702 Transistor End of travel sensor Door sensor OPB702D 890 nm Darlington 0.150" 0.400" / 0.100" (3.81mm) OPB702R Transistor and Rbe OPB702RR 640 nm Transistor and Rbe [ MILLIMETERS] OPB702D DIMENSIONS ARE IN: INCHES Reflective Surface OPB702 Reflective Surface 1 2 4 3 1 2 4 3 OPB702R Reflective Surface Pin # LED Pin # LED 1 Anode 3 Emitter 2 Cathode 4 Collector 1 2 4 3 RoHS Pin # LED Pin # Transistor 1 Cathode 3 Emitter 2 Anode 4 Collector Storage & Operating Temperature Range -40° C to +85° C (2) Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron] 260° C Input Diode Peak Forward Current 50 mA Reverse Voltage 2 V (1) Power Dissipation] 100 mW Output Photosensor Collector-Emitter Voltage OPB702, OPB702R 30 V OPB702D, OPB702RR 15 V Emitter-Collector Voltage 5 V (1) Power Dissipation] 100 mW Input Diode (see OP265 or OP165 for Infrared LED & OVLAS6CB8 for Red LED for additional information) Forward Voltage (Infrared LED) - - 1.7 I = 20 mA F V V F Red (VLED) 2.4 I = 40 mA F I Reverse Current - - 100 µA V = 2 V R R Output Phototransistor (see OP505 for Phototransistor, OP705 for Rbe-Phototransistor, OP535 for Photodarlington) Collector-Emitter Breakdown Voltage OPB702 30 - - I = 100 µA, I = 0, E = 0 C F e V (BR)CEO OPB702D 15 - - V I = 1 mA, I = 0, E = 0 C F e OPB702R, OPB702RR 30 - - I = 1 mA, I = 0, E = 0 C F e Emitter-Collector Breakdown Voltage V OPB702 5 - - V I = 100 µA, I = 0, E = 0 (BR)ECO E F E OPB702D 5 - - V I = 100 µA, I = 0, E = 0 E F E Emitter-Reverse Current I ECO OPB702R, OPB702RR - - 100 µA V = 0.4 V, I = 0, E = 0 CE F E Collector Dark Current OPB702 - - 100 nA V = 10 V, I = 0, E = 0 CE F E I CEO OPB702D - - 250 nA V = 10 V, I = 0, E = 0 CE F E OPB702R, OPB702RR - - 100 nA V = 10 V, I = 0, E = 0 CE F E Combined Collector-Emitter Saturation Voltage (3) V OPB702 - - 0.4 V I = 40 mA, I = 250 µA, d = .15” (3.81 mm) CE(SAT) F C (4) OPB702D - - 1.1 V I = 40 mA, I = 400 µA, d = .15” (3.81 mm) F C OPB702R, OPB702RR - - 0.4 V I = 40 mA, I = 250 µA, d = .15” (3.81 mm) F C On-State Collector Current OPB702 0.1 - 1.0 (3)(4) I OPB702D 3.2 - 65.0 C(ON) mA I = 40 mA, V = 5 V, d = .15” (3.81 mm) F CE OPB702R 0.4 - 6.0 OPB702RR 0.2 - 3.5 OPB702D - Collector Current vs Distance OPB702 - Collector Current vs. Distance 1.4 1.4 Normalized at 0.150" Kodak 90% Normalized at 0.150" Kodak 90% 1.2 1.2 1.0 1.0 Kodak 90% Kodak 90% Kodak 19% Kodak 19% Corporate 0.8 0.8 Corporate Avery Avery Retro Reflective Retro Reflective 0.6 0.6 0.4 0.4 0.2 0.2 0.0 0.0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.0 0.1 0.2 0.3 0.4 0.5 0.6 Reflective Distance (inches) Reflective Distance (inches) OPB702 - Collector Current OPB702D - Collector Current vs LED Current vs Temperature vs LED Current vs Temperature 2.5 2.5 Normalized at LED Current = 20mA, Normalized at LED Current = 20mA, Distance = 0.15" and Temp. = 20°C Distance = 0.15" and Temp. = 20°C 2.0 2.0 1.5 1.5 1.0 1.0 -40° C -40° C -20° C -20° C 0° C 0° C 20° C 20° C 0.5 0.5 40° C 40° C 60° C 60° C 80° C 80° C 0.0 0.0 0 5 10 15 20 25 30 35 40 0 5 10 15 20 25 30 35 40 LED Current - mA Forward Current (mA) Normalized Collector Current Normalized Collector Current Normalized Output Normalized Collector Current
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the OPB702RR?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods