Manufacturers
TT ELECTRONICS OPB821Z
Description
Photointerrupter Transmissive 2.03mm Phototransistor 4-Pin
OPB821Z
Part Number
OPB821Z
Price
Request Quote
Manufacturer
TT ELECTRONICS
Lead Time
Request Quote
Category
Optoelectronics and Displays » Photointerrupter
Specifications
Manufacturer
TT electronics
Manufacturers Part #
OPB821Z
Industry Aliases
OPB821Z
Sub-Category
Photointerrupters
Brand
Optek Technology
Packaging
Bulk
Factory Pack Quantity
100
Datasheet
Extracted Text
Slotted Optical Switch OPB820, OPB821Z, OPB821S_Z OPB820 Features: Non-contact switching Four standard aperture sizes for high resolution Low profile 0.080” (2.03 mm) wide, 0.250” (8.89 mm) deep slot Choice of PCBoard or wire mountings OPB821Z Description: Each OPB820 and OPB821Z device consists of an infrared emitting diode (LED, 890 nm center wavelength) and a NPN silicon phototransistor mounted in a low-cost black plastic housing on opposite sides of an 0.080” (2.03 mm) wide slot. Each device in this series has a 0.040” (1.02 mm) wide aperture located in front of the infrared diode. Phototransistor switching occurs when an opaque object passes through the slot. Devices are offered with 0.275” (6.96 mm) lead spacing for PCBoard mounting (OPB820) or 24” (609 mm) 26 AWG wire leads (OPB821Z). Applications: Non-contact object sensing Assembly line automation Machine automation Equipment safety Ordering Information Machine safety Part LED Peak Slot Width / Aperture Lead Length / Number Wavelength Sensor Depth Emitter/Sensor Spacing OPB820 0.04"/ 0.04" OPB820S10 0.04"/ 0.01" 0.425" / 0.275" OPB820S5 0.04"/ 0.005" OPB820S3 0.04"/ 0.003" 0.080" / 890 nm Transistor 0.255” OPB821Z 0.040"/ 0.040" OPB821S10Z 0.040"/ 0.010" 24"/26 AWG Wire OPB821S5Z 0.040"/ 0.005" OPB821S3Z 0.040"/ 0.003" General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. Issue C 11/2016 Page 1 © TT electronics plc Slotted Optical Switch OPB820, OPB821Z, OPB821S_Z Electrical Specifications Absolute Maximum Ratings (T =25°C unless otherwise noted) A Storage and Operating Temperature -40°C to +85°C (1) Lead Soldering Temperature (1/16 inch [1.6 mm] from case for 5 seconds with soldering iron) 260°C Input Diode Continuous Forward Current 50 mA Peak Forward Current (1µs pulse width, 300 pps) 1 A Reverse Voltage 2 V (2) Power Dissipation 100 mW Output Phototransistor Collector-Emitter Voltage 30 V Emitter-Collector Voltage 5 V (2) Power Dissipation 100 mW Notes: (1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. (2) For OPB820, derate linearly 1.67 mW/° C above 25° C. For OPB821Z, derate linearly 1.82 mW/° C above 25° C. (3) Methanol or isopropanol are recommended as cleaning agents. Plastic housing is soluble in chlorinated hydrocarbons and ketones. Electrical Characteristics (T = 25°C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OP245 for additional information) V Forward Voltage - - 1.7 V I = 20 mA F F I Reverse Current - - 100 µA V = 2 V R R Output Phototransistor (See OP555 for additional information) V Collector-Emitter Breakdown Voltage 30 - - V I = 100 mA (BR)CEO C V Emitter-Collector Breakdown Voltage 5 - - V I = 100 µA (BR)ECO E I Collector-Emitter Dark Current - - 100 nA V = 10 V, I = 0, I = 0 CEO CE F E Coupled Collector-Emitter Saturation Voltage OPB820, OPB821Z - - 0.4 V I = 250 µA, I = 20 mA C F V OPB820S3, OPB821S3Z - - 0.4 V I = 40 µA, I = 20 mA CE(SAT) C F OPB820S5, OPB821S5Z - - 0.4 V I = 150 µA, I = 20 mA C F OPB820S10, OPB821S10Z - - 0.4 V I = 250 µA, I = 20 mA C F On-State Collector Current OPB820, OPB821Z 500 - - µA V = 5 V, I = 20 mA CE F I OPB820S3, OPB821S3Z 60 - - µA V = 5 V, I = 20 mA C(ON) CE F OPB820S5, OPB821S5Z 300 - - µA V = 5 V, I = 20 mA CE F OPB820S10, OPB821S10Z 400 - - µA V = 5 V, I = 20 mA CE F General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. Issue C 11/2016 Page 2 © TT electronics plc Slotted Optical Switch OPB820, OPB821Z, OPB821S_Z Performance OPB820 - Flag Next to Emitter OPB820 - Flag next to Sensor 1.20 1.20 Top to Bottom Top to Bottom 1.00 1.00 0.80 0.80 Left to Right Right to Left 0.60 0.60 Left to Right Right to Left 0.40 0.40 0.20 0.20 0.00 0.00 0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) Displacement Distance (inches) OPB820 - Flag in Middle of Slot 1.20 Top to 1.00 Top to Bottom 0 0.80 Left to Right Right to Left 0.60 Emitter Left to Right Right to Left 0.40 Sensor 0.20 0 Width 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. Issue C 11/2016 Page 3 © TT electronics plc Normalized I Response C(ON) Normalized I Response C(ON) Normalized I Response C(ON) Slotted Optical Switch OPB820, OPB821Z, OPB821S_Z Performance OPB820S3 - Flag Next to Emitter OPB820S3 - Flat Next to Sensor 1.20 1.20 Top to Bottom Top to Bottom 1.00 1.00 0.80 0.80 Left to Right Right to Left Left to Right Right to Left 0.60 0.60 0.40 0.40 0.20 0.20 0.00 0.00 0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) Displacement Distance (inches) OPB820S3 - Flag in Middle of Slot 1.20 Top to Bottom 1.00 Top to Bottom 0 0.80 Left to Right Right to Left 0.60 Emitter 0.40 Left to Right Right to Left 0.20 Sensor 0 Width 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. Issue C 11/2016 Page 4 © TT electronics plc Typical I Response (mA) C(ON) Typical I Response (mA) C(ON) Typical I Response (mA) C(ON) Slotted Optical Switch OPB820, OPB821Z, OPB821S_Z Performance OPB820S5 - Flag Next to Emitter OPB820S5 - Flag Next to Sensor 1.20 1.20 Top to Top to 1.00 1.00 0.80 0.80 Left to Right Right to Left Left to Right Right to Left 0.60 0.60 0.40 0.40 0.20 0.20 0.00 0.00 0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) Displacement Distance (inches) OPB820S5 - Flag in Middle Slot 1.20 Top to 1.00 Top to Bottom 0 0.80 Left to Right Right to Left 0.60 Emitter 0.40 Left to Right Right to Left Sensor 0.20 0 Width 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. Issue C 11/2016 Page 5 © TT electronics plc Typical I Response (mA) C(ON) Typical I Response (mA) C(ON) Typical I Response (mA) C(ON) Slotted Optical Switch OPB820, OPB821Z, OPB821S_Z Performance OPB820S10 - Flag Next to Emitter OPB820S10 - Flag Next to Sensor 1.20 1.20 Top to Top to Bottom 1.00 1.00 0.80 0.80 Left to Right Right to Left Left to Right Right to Left 0.60 0.60 0.40 0.40 0.20 0.20 0.00 0.00 0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) Displacement Distance (inches) OPB820S10 - Flag in Middle of Slot 1.20 Top to 1.00 Top to Bottom 0 0.80 Left to Right Right to Left 0.60 Emitter 0.40 Left to Right Right to Left 0.20 Sensor 0 Width 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. Issue C 11/2016 Page 6 © TT electronics plc Typical I Response (mA) C(ON) Typical I Response (mA) C(ON) Typical I Response (mA) C(ON) Slotted Optical Switch OPB820, OPB821Z, OPB821S_Z Packaging Package Drawing Package Drawing OPB820 OPB821 24.0 [609] [ MILLIMETERS] DIMENSIONS ARE IN: INCHES CONTAINS POLYSULFONE To avoid stress cracking, we suggest using ND Industries’ Vibra-Tite for thread-locking. Vibra-Tite evaporates fast without causing structural failure in OPTEK’s molded plastics. Pin # Description Pin # Description Color/Pin # Description Color/Pin # Description Green-3 Cathode White-2 Collector 4 Cathode 2 Collector Orange-4 Anode Blue-1 Emitter 3 Anode 1 Emitter 4 2 3 2 1 3 1 4 General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. Issue C 11/2016 Page 7 © TT electronics plc
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the OPB821Z?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Photointerrupter Transmissive Phototransistor 6-Pin OCB350L062Z
Photointerrupter Transmissive Phototransistor 6-Pin OCB350L125Z
Photointerrupter Transmissive Phototransistor 6-Pin OCB350L187Z
Photointerrupter Transmissive Phototransistor 6-Pin OCB350L250Z
Photointerrupter Transmissive Transistor 2-Pin OPB100-EZ
Photointerrupter Transmissive Transistor 2-Pin OPB100-SZ
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods