OPF500 Series Features:  Interfaces with all logic circuits  Two output options  Optimized for fiber optic applications using 50 to 200 micron fibers  Data rate to 200kbps NRZ  Available with multiple packaging options Description: The OPF500 series receiver contains a monolithic integrated circuit which incorporates a photodiode, linear amplifier, a voltage regulator, and a Schmitt trigger on a single silicon chip. These receivers are designed for short haul fiber optic systems using 850 nm LEDs such as Optek’s OPF300 series. These devices feature TTL/LSTTL compatible logic level output. An internal voltage regulator allows operation with supply voltages ranging from 4.5V to 16V. Applications:  Industrial Ethernet equipment  Copper-to-fiber media conversion  Intra-system fiber optic links Part Ordering Information Part Number Description OPF500 Buffer, 10kW Pull-Up Plastic Cap Component OPF505 Buffer, 10kW Pull-Up Metal Can Component OPF507 Buffer, 10kW Pull-Up Metal ST Receptacle This component is susceptible to damage from electrostatic discharge (ESD). Normal static precautions should be taken in handling and assembly of this component to prevent ESD damage or degradation. RoHS General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue B 08/2016 Page 1 © TT electronics plc OPF500 Series Mechanical Outline—OPF500 General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue B 08/2016 Page 2 © TT electronics plc OPF500 Series Mechanical Outline—OPF505 General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue B 08/2016 Page 3 © TT electronics plc OPF500 Series Mechanical Outline—OPF507 General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue B 08/2016 Page 4 © TT electronics plc OPF500 Series Electrical Specifications Absolute Maximum Ratings (T = 25° C unless otherwise noted) A Storage Temperature 65° C to +100° C Operating Temperature -40° C to +85° C Lead Soldering Temperature (for 10 seconds) 260° C Supply Voltage 18 V Sinking Current 16 mA Power Dissipation 200 mW Open Collector Power Distribution 40mW Voltage at Output 30 V Electrical Characteristics (T = 25° C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS V Supply Voltage 4.5 16.0 V CC Buffer: P > 2.0 µW IN V High Level Output Voltage VCC - 1.5 V OH Inverter: P < 0.1 µW IN Buffer: P < 0.1 µW IN V Low Level Output Voltage 0.4 V OL Inverter: P > 2.0 µW IN I Supply Current 5.0 12.0 mA No output load CC P Input Sensitivity 2.0 µW λ = 850 nm IN p 300 Buffer t Rise Time ns r 100 Inverter P = 1.5 µW (peak) IN V = 5.0 V CC 300 Buffer t Fall Time ns f 100 Buffer BW Bandwidth 100 kHz P > 2.0 µW, 50% duty cycle IN 1 µW < P < 100 µW, f = 20 kHz IN PWD Pulse Width Distortion ±10 % 50% duty cycle General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue B 08/2016 Page 5 © TT electronics plc OPF500 Series Performance General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue B 08/2016 Page 6 © TT electronics plc