Fiber Optic Receiver OPF560 Series Features: • Low Cost • Data Rates up to 155 MBd • Wide Temperature Range • SMA, ST, or plasƟc cap style • Wave Solderable Description: The OPF560 series receiver is a low cost soluƟon for high speed Ţber opƟc communicaƟon designs. The output of the receiver is an analog, low impedance, emiƩer follower voltage source capable of driving an ampliŢer or level translaƟng circuitry. This allows the subsequent circuitry to use the device in either the analog mode or translated to ECL/TTL levels for us in a digital mode at data rates up to 155MBaud. The receiver is comprised of a high speed, low noise, photodiode coupled to a transimpedance ampliŢer which produces an output voltage proporƟonal to the input light amplitude. This hybrid approach solves many of the problems of high speed data link designs by placing a pre-ampliŢer close to the photodiode. The ampliŢcaƟon of the transimpedance ampliŢer makes the output signal much less suscepƟble to EMI. An AC coupled receiver applicaƟon circuit is shown. Both the 10 W resistor and bypass capacitor are criƟcal. Applications: • Industrial Ethernet equipment • Copper-to-Ţber media conversion • Intra-system Ţber opƟc links • Video surveillance systems Part Ordering InformaƟon Part Number DescripƟon OPF560 PlasƟc Cap Component OPF562 Metal ST Receptacle This component is suscepƟble to damage from electrostaƟc discharge (ESD). Normal staƟc precauƟons should be taken in handling and assembly of this component to prevent ESD damage or degradaƟon. RoHS General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue B 08/2016 Page 1 © TT electronics plc Fiber Optic Receiver OPF560 Series Mechanical Outline—OPF560 General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue B 08/2016 Page 2 © TT electronics plc Fiber Optic Receiver OPF560 Series Mechanical Outline—OPF562 v x General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue B 08/2016 Page 3 © TT electronics plc Fiber Optic Receiver OPF560 Series Electrical Specifications Absolute Maximum Ratings (T = 25° C unless otherwise noted) A Storage Temperature -55° C to +85° C OperaƟng Temperature -40° C to +85° C Lead Soldering Temperature (for 10 seconds) 260° C Supply Voltage (V - V ) -0.5 to 6.0 V CC EE Signal Pin Voltage -0.5 to V CC Output Current 25 mA Electrical Characteristics (-5.45 V ≤ V ≤ -4.75 V, R = 511 W, Fiber Sizes ≤ 100 μm, N.A. ≤ 0.35, T = 25° C unless otherwise noted) CC LOAD A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS 5.3 7.0 9.6 λ = 840 nm, f = 50 MHz R Responsivity mV/µW P 4.5 11.5 λ = 840 nm, f = 50 MHz, -40° ≤ T ≤ +85 °C A 0.40 0.59 Bandwidth Filtered @ 75 MHz, P = 0 µW R V RMS Output Noise Voltage mV NO 0.70 UnŢltered Bandwidth, PR = 0 µW -43.0 -41.4 dBm P Equivalent OpƟcal Noise Input Power (RMS) Bandwidth Filtered @ 75 MHz N 0.050 0.065 µW -7.6 dBm T = 25°C A T = 25°C 175 µW A P Peak Input Power R -8.2 dBm -40° ≤ T ≤ +85 °C A 150 µW -40° ≤ T ≤ +85 °C A V DC Output Voltage -4.2 -3.1 -2.4 V P = 0 µW odc R I Power Supply Current 9 15 mA R = ∞ EE load t , t Rise Time, Fall Time (10% - 90%) 3.3 6.3 ns P = 100 μW, R = 511 W, C = 5 pF R load load r f PWD Pulse Width DistorƟon 0.4 2.5 ns P = 150 µW peak, PW = 10 ns, 50% D.C. R BW Bandwidth 125 MHz -3 dB Electrical PSRR Power Supply RejecƟon RaƟo 20 dB f = 10 MHz General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue B 08/2016 Page 4 © TT electronics plc