TT ELECTRONICS OPI150

Optically Coupled Isolator / High Speed Optically Coupled Isolator OPI150, OPI153, OPI155 Features: •50 kV electrical isola� on • Choice of phototransistor or photodarlington output • High speed >5 MBd (OPI155) • Herme� cally sealed LED and photosensor • Base contact lead for conven� onal transistor biasing • TX and TXV process available (see Hi-Rel sec� on) Description: Each OPI150 and OPI153 is an op� cally coupled isolator that contains an infrared emi�ng diode and a NPN silicon phototransistor (OPI150) or photodarlington (OPI153), each sealed in an individual herme� cally sealed package. The diode and phototransistor or diode and photodarlington are then op� cally coupled by means of a light pipe and mounted in a high dielectric plas� c housing. These devices are designed for applica� ons that require very high isola� on between input and output. The OPI155 is a high-speed op� cal coupled isolator that contains a high speed monolithic photo-IC comprised of a photodiode and a DC ampliŢer that drives an open collector output Scho� ky transistor. It is op� cally coupled by means of an internal light pipe. The LED and sensor are both in separate herme� cally sealed packages that are then mounted in a high dielectric plas� c housing. This device is designed for applica� ons that require high speed and high voltage isola� on between the input and output. TX and TXV devices are available. Please contact your local representa� ve or OPTEK for more informa� on. Applications: Ordering InformaƟon • Requiring high voltage isola� on LED IsolaƟon V Lead CE between input and output Part Peak Voltage CTR I (mA) (Volts) Length / F Number Wavelength Sensor (,000) Min / Max Typ / Max Max Spacing • Electrical isola� on in dirty OPI150 890 nm Transistor 10 / NA 16 / 50 30 environments 890 nm or 935 0.40" / • Industrial equipment OPI153 Darlington 50 25 / NA 30 / 50 15 nm 3.16" • Medical equipment OPI155 890 nm TIA –OC 80 / NA 10 / 50 18 • Office equipment OPI150 1 3 4 - Base 2 5 OPI153 OPI155 [MILLIMETERS] DIMENSIONS ARE IN: 1 INCHES 4 5 Pin # LED Pin # OPI150 & OPI153 Pin # OPI155 1 Anode 3 Collector 3 Ground 2 Cathode 4 Base 4 Vcc 3 5 Emitter 5 Output 2 RoHS General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue D 09/2016 Page 1 © TT electronics plc Optically Coupled Isolator / High Speed Optically Coupled Isolator OPI150, OPI153, OPI155 Absolute Maximum Ratings (T = 25° C unless otherwise noted) A Opera� ng Temperature Range -40° C to +85° C Storage Temperature Range -40° C to +85° C (1)(2) Input-to-Output Isola� on Voltage ±50 kVDC ](3) Lead Soldering Temperature [1/16 inch (1.6 mm) from the case for 5 seconds with soldering iron 260° C Input Diode Continuous Forward Current 50 mA Reverse Voltage 3 V (4) Power Dissipation 200 mW Output Phototransistor or Photodarlington (OPI150, OPI153) Collector-Base Voltage OPI150 30 V OPI153 20 V Collector-Emi� er Voltage OPI150 30 V OPI153 15 V Emi� er-Collector Voltage 5.0 V (5) Power Dissipa� on 250 mW Output Photosensor (OPI155) Supply Voltage -0.5 to 7 V Output Voltage -0.5 to 18 V Output Current 25 mA Open-Collector Power Dissipa� on 40 mW (5) Power Dissipa� on 250 mW Notes: (1) For OPI150 and OPI153, measured with input leads and output leads shorted. (2) For OPI155, measured with input and output leads shorted and rela� ve humidity of less than 50%. (3) RMA ţux is recommended. Dura� on can be extended to 10 seconds maximum when ţow soldering. (4) Derate linearly 3.33 mW/° C above 25° C. (5) Derate linearly 4.17 mW/° C above 25° C. General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue D 09/2016 Page 2 © TT electronics plc Optically Coupled Isolator / High Speed Optically Coupled Isolator OPI150, OPI153, OPI155 Electrical Characteristics (T = 25° C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (For OPI150 & OPI153, see OP236 for additional information - for reference only. For OPI155, see OP235W for additional information - for reference only.) Forward Voltage V OPI150, OPI153 - 1.3 1.6 V I = 50 mA F F OPI155 - 1.2 1.6 I = 10 mA F I Reverse Current - 0.1 100 µA V = 3 V R R Output Phototransistor or Photodarlington (For OPI150, see OP805SL for additional information, for OPI153, see OP830SL for additional information- for reference only.) Collector-Emi� er Breakdown Voltage V OPI150 30 - - (BR)CEO V I = 1 mA C OPI153 15 - - Emi� er-Collector Breakdown Voltage V (BR)ECO OPI150, OPI153 5 - - V I = 100 µA F Collector-Base Breakdown Voltage V OPI150 30 - - (BR)CBO V I = 100 µA C OPI153 20 - - Collector-Emi� er Dark Current I OPI150 - - 100 CEO nA V = 10 V CE OPI153 - - 500 Collector-Base Dark Current I nA V = 10 V CBO CB OPI150 - - - Coupled (OPI150, OPI153) DC Current Transfer Ratio I I OPI150 10 I = 10 mA, V = 5 V C/ F F CE - - % OPI153 25 I = 20 mA, V = 5 V F CE Ib0State Photodiode Current I µA I = 20 mA, V = 5 V CB(ON) F CB OPI150 10 - - Saturation Voltage v OPI150 - - 0.5 V I = 16 mA, I = 1 mA CE(SAT) F C OPI153 - - 1.2 I = 30 mA, I = 2 mA F C General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue D 09/2016 Page 3 © TT electronics plc Optically Coupled Isolator / High Speed Optically Coupled Isolator OPI150, OPI153, OPI155 Electrical Characteristics (T = 25° C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Output Photosensor (OPI155) High Level Output Current I µA V = 18 V, I = 0, V = Open OH O F CC OPI155 - - 250 High Level Supply Current I mA V = 5.25 V, I = 0, V = Open CCH CC F O OPI155 - - 6.5 Low Level Supply Current I mA V = 5.25 V, I = 10 mA, V = 0 CCL CC F O OPI155 - - 10 Low Level Output Voltage v V V = 5.25 V, I = 10 mA, I = 8 mA OL CC F O OPI155 - - 0.5 Switching Characteristics (OPI155) T Propagation Delay, High to Low - 120 150 PHL ns V = 5 V, I = 10 mA, R = 360 Ω CC F L T Propagation Delay, Low to High - 70 100 PLH General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue D 09/2016 Page 4 © TT electronics plc