Optically Coupled Isolator OPI7002, OPI7002RCE, OPI7010, OPI7010RCE OPI7320RCE, OPI7340RCE Features:  ± 6 kV electrical isolation  Inexpensive plastic housing  Choice of phototransistor or photodarlington output  UL registered File No. E58730* Description: Each OPI7002 and OPI7010 consists of an infrared emitting diode coupled to a NPN silicon phototransistor. The LED and sensor are encased in a black, low-cost plastic housing. Pin spacing is compatible with standard dual-in-line packages. Each OPI7320RCE and OPI7340RCE consists of an infrared emitting diode coupled to a NPN silicon photodarlington. The LED and sensor are encased in a high dielectric plastic housing. Pin spacing is compatible with standard dual-in-line packages. The RCE versions reverses the Phototransistor Emitter and Collector pin-out. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Ordering Information Applications: LED Isolation Lead CTR I (mA) V (Volts) F CE  Requiring high voltage isolation between input and Part Peak Voltage Length / Min Typ / Max Max output Number Wavelength Sensor (,000) Spacing  Electrical isolation in dirty environments OPI7002 20 0.30" / 890 nm Transistor 6 10 / 50 30  Industrial equipment 0.30" OPI7010 100  Medical equipment OPI7320RCE 200 890 nm or 0.30" /  Office equipment Darlington 6 5 / 50 15 935 nm 0.30" OPI7340RCE 400 OPI7002, OPI7010 OPI7002RCE, OPI7010RCE 2 3 2 3 Pin # LED Pin # Transistor/ RCE 2 Cathode 3 Collector / Emitter 1 Anode 4 Emitter / Collector 1 4 1 4 OPI7320RCE, OPI7340RCE 2 3 1 4 [MILLIMETERS] DIMENSIONS ARE IN: INCHES RoHS General Note TT Electronics | OPTEK Technology TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | www.optekinc.com considered accurate at time of going to print. Issue A 09/2016 Page 1 © TT electronics plc Optically Coupled Isolator OPI7002, OPI7002RCE, OPI7010, OPI7010RCE OPI7320RCE, OPI7340RCE Absolute Maximum Ratings (T = 25° C unless otherwise noted) A Operating Temperature Range -40° C to +85° C Storage Temperature Range -40° C to +85° C (1)(4) Input-to-Output Isolation Voltage ±6 kVDC (2) Lead Soldering Temperature [1/16 inch (1.6 mm) from the case for 5 seconds with soldering iron 260° C Input Diode Forward DC Current 50 mA Peak Forward current (1 µs pulse width, 300 pps) 3 A Reverse Voltage 2 V (3) Power Dissipation 100 mW Output Phototransistor Collector-Emitter Voltage OPI7002, OPI7010, OPI7002RCE, OPI7010RCE 30 V OPI7320RCE, OPI7340RCE 15 V Emitter-Collector Voltage 5.0 V (3) Power Dissipation 100 mW Notes: (1) Measured with input leads and output leads shorted. (2) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. (3) Derate linearly 1.66 mW/° C above 25° C. (4) UL recognition is for 3500 V rms at 60 Hz. General Note TT Electronics | OPTEK Technology TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | www.optekinc.com considered accurate at time of going to print. Issue A 09/2016 Page 2 © TT electronics plc Optically Coupled Isolator OPI7002, OPI7002RCE, OPI7010, OPI7010RCE OPI7320RCE, OPI7340RCE Electrical Characteristics (T = 25° C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OP140 or OP240 for additional information—for reference only) V Forward Voltage - 1.2 1.70 V I = 10 mA F F I Reverse Current - - 100 µA V = 2.0 V R R Output Phototransistor (OPI7002, OPI7010) (See OP550 for additional information—for reference only) Output Photodarlington (OPI7320, OPI7340) (See OP560 for additional information—for reference only) Collector-Emitter Breakdown Voltage V OPI7002/RCE, OPI7010/RCE 30 - - (BR)CEO V I = 100 µA, I = 0 C F OPI7320RCE, OPI7340RCE 15 - - V Emitter-Collector Breakdown Voltage 5 - - V (BR)ECO I = 100 µA, I = 0 E F I Collector-Emitter Dark Current - - 100 nA CEO V = 10 V, I = 0 CE F Coupled DC Current Transfer Ratio OPI7002, OPI7002RCE 20 - - I = 10 mA, V = 5 V F CE I I OPI7010, OPI7010RCE 100 - - I = 10 mA, V = 5 V C/ F F CE % OPI7320RCE 200 - - I = 5 mA, V = 5 V F CE OPI7340RCE 400 - - I = 5 mA, V = 5 V F CE Collector-Emitter Saturation Voltage V OPI7002/RCE, OPI7010/RCE - - 0.4 V I = 10 mA, I = 0.50 mA (SAT) F C OPI7320RCE, OPI7340RCE - - 1.0 I = 5 mA, I = 2 mA F C (1) V Isolation Voltage 6 - - kVDC See note 1 ISO Turn-On Time T OPI7002/RCE, OPI7010/RCE - 4 - (ON) OPI7320RCE, OPI7340RCE - 150 - µs V = 10 V, I = 10 mA, R = 100 Ω CE C L Turn-Off Time T OPI7002/RCE, OPI7010/RCE - 3 - (OFF) OPI7320RCE, OPI7340RCE - 125 - (1) C Capacitance Input-to-Output IO - 0.2 - pF V = 0, F = 1 MH IO z Notes: (1) Measured with input leads and output leads shorted. General Note TT Electronics | OPTEK Technology TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | www.optekinc.com considered accurate at time of going to print. Issue A 09/2016 Page 3 © TT electronics plc