OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810, OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813-OC, OPL820, OPL820-OC, OPL821-OC Features:  Four output options available  High noise immunity  Direct TTL/LSTTL interface  TO-18 hermetically sealed package  Sensors mechanically and spectrally matched to other Optek devices (see device descriptions detailed below) Description: All OPL800, OPL801, OPL820 and OPL821 sensors consist of a photodiode, a linear amplifier and a Schmitt trigger on a single silicon chip (monolithic chip for OPL820 and OPL821). OPL810, OPL811, OPL812 and OPL813 sensors also have a voltage regulator added to their photologic chips. Each device’s photologic chip is mounted onto a standard TO-18 header and hermetically sealed in a lensed metal can. All devices in the series feature TTL/LSTTL compatible logic level output, which can drive up to 8 TTL loads (OPL800, OPL801) or up to 10 TTL loads (OPL810, OPL811, OPL812, OPL813, OPL820 and OPL821) without additional circuitry. On all these devices, the Schmitt trigger’s hysteresis characteristics provide high immunity to noise on input and V . CC OPL800 series devices feature medium-speed data rates to 250 kBaud, with typical rise and fall times of 25 nanoseconds. OPL800 and OPL801 devices are mechanically and spectrally matched to OP130 and OP231 series LEDs. OPL810, OPL811, OPL812 and OPL813 devices are mechanically and spectrally matched to OP130 and OP230 series devices. OPL820 and OPL821 devices are mechanically and spectrally matched to OP130 and OP231 series LEDs. Applications: OPL80_ or  Non-contact reflective object sensor Pin # OPL81_ OPL82_ Transistor  Assembly line automation 1 Ground Ground Collector  Machine automation 2 V Output Base CC  Machine safety  End of travel sensor 3 Output V Emitter CC  Door sensor TO-18 Base Mounted to TO-18 Base [ MILLIMETERS] DIMENSIONS ARE IN: INCHES RoHS Pin # OPL80_ or OPL81_ OPL82_ Transistor 1 Ground Ground Collector General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 2 Vcc Output Base notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. 3 Output Vcc Emitter Issue A 08/2016 Page 1 © TT electronics plc OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810, OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813- OC, OPL820, OPL820-OC, OPL821-OC Ordering Information Input Power E V (V) E CC 2 Part Number Photologic® (µW/cm ) Min / Max Min / Max I / I Lead Length OH OL OPL800 Totem-Pole OPL800-OC Open-Collector 50 / 600 0.10 / 12.8 OPL801 Inv-Totem-Pole OPL801-OC Inv-Open-Collector OPL810 Totem-Pole OPL810-OC Open-Collector OPL811 Inv-Totem-Pole 4.5 / 16.0 0.50" 5 / 100 OPL811-OC Inv-Open-Collector OPL812-OC Open-Collector 0.10 / 16.0 OPL813-OC Inv-Open-Collector OPL820 10K Pull-Up OPL820-OC Open Collector 2 / 35 OPL821-OC Inv. Open Collector OPL800, OPL800OC, OPL801, OPL801-OC, OPL810, OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813-OC, OPL820-OC, OPL821-OC OPL800/800B/810 Buffered Totem-Pole OPL800-OC/810-OC/812-OC/820/OC Open-Collector V CC V CC OUT OUT GND GND OPL801/811 Inverted Totem-Pole OPL801-OC/811-OC/813-OC/821-OC Inverted Open-Collector V V CC CC OUT OUT GND GND General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 2 © TT electronics plc OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810, OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813- OC, OPL820, OPL820-OC, OPL821-OC OPL820 OPL820 10K Pull-Up OPL821 Inverted 10K Pull-Up V V CC CC OUT OUT GND GND V CC V CC OUT OUT GND GND General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 3 © TT electronics plc OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810, OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813- OC, OPL820, OPL820-OC, OPL821-OC Electrical Specifications Absolute Maximum Ratings (T = 25° C unless otherwise noted) A OPB800/801/810/811 and OPB800-OC Series Input Diode Operating Temperature Range OPL800, OPL801 -55° C to +110° C OPL810, OPL811 -55° C to +105° C OPL820 -40° C to +100° C Storage Temperature Range OPL800, OPL801 -65° C to +150° C OPL810, OPL811 -65° C to +125° C OPL820 -55° C to +125° C (1) Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron] 260°C Input Infrared LED Supply Voltage, V (not to exceed 3 seconds) CC OPL800, OPL801 10 V OPL810, OPL811, OPL820 18 V Sourcing Current OPL810, OPL811 10 mA Output Voltage (high state) OPL800, OPL801, OPL810, OPL811 35 V OPL810, OPL811 50 mA OPL820 30 V Output Current Sink (low state) OPL810, OPL811 50 mA OPL820 16 mA Irradiance 2 OPL800, OPL801 3 mW/cm 2 OPL810, OPL810-OC, OPL811, OPL811-OC 2 mW/cm 2 OPL812, OPL812-OC, OPL813, OPL813-OC 1 mW/cm General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 4 © TT electronics plc OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810, OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813- OC, OPL820, OPL820-OC, OPL821-OC Electrical Specifications Absolute Maximum Ratings (T = 25° C unless otherwise noted) A OPB800/801/810/811/812/813 and OPB800-OC Series Output Photologic® Voltage at Output Lead OPL800, OPL801, OPL810, OPL811 35 V OPL820 30 V Duration of Output Short to V 1 second CC Power Dissipation (2) OPL800, OPL801 120 mW (2) OPL810, OPL811 250 mW (2) OPL820 200 mW Notes: (1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering. For OPB820, a maximum of 20 grams force may be applied to leads while at soldering temperatures. (2) Derate linearly 2.5 mW/°C above 25° C for OPL800, OPL801, OPL810, OPL811. Derate linearly 5.7 mW/°C above 90° C for OPL820. (3) For OPL800, OPL801, OPL810, OPL811, light measurements are made with λi = 935 nm. For OPB820, light measurements are made with an LED source having a wavelength of 935 nm. General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 5 © TT electronics plc OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810, OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813- OC, OPL820, OPL820-OC, OPL821-OC Electrical Specifications Electrical Characteristics (T = 25° C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Operating Supply Voltage OPL800/801 4.5 - 5.5 V - OPL810/811 4.5 - 16 V - OP820 4.5 - 16 V - V CC Peak-to-Peak V Ripple Necessary to CC Cause False Triggering of Output OPL800/801 - 2 - V f = DC to 50 MHz OPL810/811 - - 1 V f = DC to 50 MHz 2 I Supply Current - - 15 mA E = 0 or 1 mW/cm CC e (3) Positive-Going Threshold Irradiance 2 OPL800/801 0.050 0.180 0.600 mW/cm T = 25°C (+) A E eT 2 OPL810/811 0.015 0.060 0.200 mW/cm T = 25°C A 2 (3) OPL820 0.002 0.015 0.035 mW/cm See below Hysteresis Ratio (+) (-) E E OPL800/801 1.5 2.0 2.5 - - eT / eT OPL810/811 1.2 1.5 2.0 - - Hysteresis Ratio (+) (-) E E e / e (3) OPL820 1.05 1.20 1.90 - See below High State Supply Current I CCH (4) OPL820 - 5 12 mA See below Low State Supply Current I CCL (5) OPL820 - 4 12 mA See below General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 6 © TT electronics plc OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810, OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813- OC, OPL820, OPL820-OC, OPL821-OC Electrical Specifications Electrical Characteristics (T = 25° C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS High Level Output Voltage - 2 OPL800 2.4 - V I = -800 µA, E = 1 mW/cm OH e - OPL801 2.4 - V I = -800 µA, E = 0 OH e V - OH 2 OPL810 V -2.1 - V I = -1mA, E = 0.4 mW/cm CC OH e - OPL811 V -2.1 - V I = -1mA, E = 0 CC OH e - (4) OPL820-OC/821-OC V -1.5 V V I = -100 µA CC CC OH - Notes: (1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering. For OPB820, a maximum of 20 grams force may be applied to leads while at soldering temperatures. (2) Derate linearly 2.5 mW/°C above 25° C for OPL800, OPL801, OPL810, OPL811. Derate linearly 5.7 mW/°C above 90° C for OPL820. (3) For OPL800, OPL801, OPL810, OPL811, light measurements are made with λi = 935 nm. For OPB820, light measurements are made with an LED source having a wavelength of 935 nm. 2 2 (4) High output state limits are valid for 4.5 V < V < 16 V and E > 0.035 mW/cm (OPL820, OPL820-OC), E < 0.001 mW/cm CC e e (OPL821-OC). 2 2 (5) Low output state limits are valid for 4.5 V < V < 16 V and E > 0.035 mW/cm (OPL821-OC), E < 0.001 mW/cm (OPL820, CC e e OPL820-OC). General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 7 © TT electronics plc OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810, OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813- OC, OPL820, OPL820-OC, OPL821-OC Electrical Specifications Electrical Characteristics (T = 25° C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS High Level Output Voltage - 2 OPL800 2.4 - V I = -800 µA, E = 1 mW/cm OH e - OPL801 2.4 - V I = -800 µA, E = 0 OH e V - OH 2 OPL810 V -2.1 - V I = -1mA, E = 0.4 mW/cm CC OH e - OPL811 V -2.1 - V I = -1mA, E = 0 CC OH e - (4) OPL820-OC/821-OC V -1.5 V V I = -100 µA CC CC OH - Low Level Output Voltage OPL800/800-OC - - 0.4 V I = 12.8 mA, E = 0 OL e 2 OPL801/801-OC - - 0.4 V I = 12.8 mA, E = 1 mW/cm OL e OPL810/810-OC - - 0.4 V I = 16 mA, E = 0 OL e V OL 2 OPL811/811-OC - - 0.4 V I = 16 mA, E = 0.4 mW/cm OL e OPL812-OC - - 0.4 V I = 16 mA, E = 0 OL e 2 OPL813-OC - - 0.4 V I = 16 mA, E = 0.2 mW/cm OL e (5) OPL820 - - 0.4 V I = 16 mA OL High Level Output Current 2 OPL800-OC - - 100 µA V = 30 V, E = 2 mW/cm OH e OPL801-OC - - 100 µA V = 30 V, E = 0 OH e 2 I OPL810-OC - - 100 µA V = 30 V, E = 0.4 mW/cm OH OH e OPL811-OC - - 100 µA V = 30 V, E = 0 OH e 2 OPL812-OC - - 100 µA V = 30 V, E = 0.2 mW/cm OH e OPL813-OC - - 100 µA V = 30 V, E = 0 OH e Short Circuit Output Current 2 I OPL800 -20 mA E = 1 mW/cm , Output = GND OS e OPL801 - -100 mA E = 0, Output = GND e General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 8 © TT electronics plc OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810, OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813- OC, OPL820, OPL820-OC, OPL821-OC Electrical Specifications Electrical Characteristics (T = 25° C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Output Rise Time, Fall Time 2 OPL800/801 - 70 - ns T = 25°C, E = 0 or 1 mW/cm , R = 8 A e L TTL loads, f = 10 kHz, D.C. = 50% 2 OPL800-OC/801-OC - 70 - ns T = 25°C, E = 0 or 1 mW/cm , R = A e L 360 Ω, f = 10 kHz, D.C. = 50% 2 t , t OPL810/811 - 70 - ns T = 25°C, E = 0 or 0.4 mW/cm , R = r f A e L 10 TTL loads, f = 10 kHz, D.C. = 50% 2 OPL810-OC/811-OC/812-OC/ - 100 - ns T = 25°C, E = 0 or 1 mW/cm , R = A e L 813-OC 300 Ω, f = 10 kHz, D.C. = 50% OPL820 - 60 - ns RL = 390Ω Propagation Delay Low/High - High/Low 2 - 5 - µs T = 25°C, E = 0 or 1 mW/cm , R = 8 A e L OPL800/801 TTL loads, f = 10 kHz, D.C. = 50% 2 - 5 - µs T = 25°C, E = 0 or 1 mW/cm , R = 8 A e L OPL800-OC/801-OC TTL loads, f = 10 kHz, D.C. = 50% 2, t , t - 5 - µs T = 25°C, E = 0 or 0.4 mW/cm R = PLH PHL A e L OPL810/811 10 TTL loads, f = 10 kHz, D.C. = 50% 2, - 5 - µs T = 25°C, E = 0 or 1 mW/cm R = A e L OPL810-OC/811-OC/812-OC/ 300 Ω, f = 10 kHz, D.C. = 50% 813-OC 2 - 1 - µs E = 0.1 mW/cm , RL = 390 Ω E OPL820 (to high state) 2 - 2.1 - µs E = 01 mW/cm , RL = 390 Ω E OPL820 (to low state) 2 Data Rate Data Rate Using NRZ Format - 100 - kHz E = 01 mW/cm , RL = 390 Ω E Notes: (1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering. For OPB820, a maximum of 20 grams force may be applied to leads while at soldering temperatures. (2) Derate linearly 2.5 mW/°C above 25° C for OPL800, OPL801, OPL810, OPL811. Derate linearly 5.7 mW/°C above 90° C for OPL820. (3) For OPL800, OPL801, OPL810, OPL811, light measurements are made with λi = 935 nm. For OPB820, light measurements are made with an LED source having a wavelength of 935 nm. 2 2 (4) High output state limits are valid for 4.5 V < V < 16 V and E > 0.035 mW/cm (OPL820, OPL820-OC), E < 0.001 mW/cm CC e e (OPL821-OC). 2 2 (5) Low output state limits are valid for 4.5 V < V < 16 V and E > 0.035 mW/cm (OPL821-OC), E < 0.001 mW/cm (OPL820, CC e e OPL820-OC). General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 9 © TT electronics plc OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810, OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813- OC, OPL820, OPL820-OC, OPL821-OC Performance OPL800, OPL801 OPL800-OC, OPL801-OC OPL800, OPL800-OC OPL801, OPL801-OC General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 10 © TT electronics plc OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810, OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813- OC, OPL820, OPL820-OC, OPL821-OC Performance OPL800, OPL801 Series General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 11 © TT electronics plc OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810, OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813- OC, OPL820, OPL820-OC, OPL821-OC Performance OPL810, OPL811 Series OPL812, OPL813 Series General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 12 © TT electronics plc OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810, OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813- OC, OPL820, OPL820-OC, OPL821-OC Performance OPL812, OPL813 Series General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 13 © TT electronics plc OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810, OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813- OC, OPL820, OPL820-OC, OPL821-OC Performance OPL820, OPL821 Series General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 14 © TT electronics plc OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810, OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813- OC, OPL820, OPL820-OC, OPL821-OC Performance OPL820, OPL821 Series General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 15 © TT electronics plc