OPR5005 Features:  High temperature operation  Surface mountable  Compact size  Excellent ambient light protection Description: The OPR5005 is a miniature reflective sensor that combines a silicon phototransistor with a GaAIAs LED in a high- temperature opaque polyamide chip carrier. It is designed to sense the motion or proximity of diffuse reflective surfaces in space-limited applications. The opaque package insures very low cross-talk and shields the phototransistor from ambient light sources, while the silicone encapsulated package allows operation over a wide temperature range. The gold-plated wraparound solder pads offer exceptional storage and wetting characteristics. See Application Bulletin 237 for handling instructions. Ordering Information Applications: Reflective  Motion sensors Switch LED Peak # of I (µA) I (mA) V Packaging C(ON) F CE  Space-limited applications Part Number Wavelength Sensor Elements Min Typ / Max Typ / Max  Applications requiring OPR5005 890 nm Phototransistor 2 725 20 / 50 5 / 30 Chip Tray ambient light protection  Can be stored in dirty Pin # Description Warning: Front Win- 1 Collector dows are pressure sensi- 2 Anode tive. Do not apply pres- 3 Cathode sure or high vacuum to 4 Emitter window. RoHS General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue E 05/2018 Page 1 © TT electronics plc Electrical Specifications Absolute Maximum Ratings (T = 25° C unless otherwise noted) A Storage and Operating Temperature -55°C to +125° C (1) Solder reflow time within 5°C of peak temperature is 20 to 40 seconds 250° C LED Forward DC Current 50 mA Peak Forward Current (1 µs pulse; .03% duty cycle) 1.0 A Reverse DC Voltage 2.0 V (2) Power Dissipation 75 mW Phototransistor Collector-Emitter Voltage 30 V Emitter-Collector Voltage 5.0 V Collector DC Current 25 mA (2) Power Dissipation 75 mW Electrical Characteristics (T = 25° C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS LED V Forward Voltage - - 1.7 V I = 20 mA F F I Reverse Current - - 100 µA V = 2.0 V R R Phototransistor V Collector-Emitter Breakdown Voltage 30 - - V I = 100 µA (BR)CEO C V Emitter-Collector Breakdown Voltage 5 - - V I = 100 µA (BR)ECO E V = 5.0 V, I = 0, CE F I Collector Dark Current - - 100 nA CEO 2 E = ≤ 0.10 µW/cm e Combined V = 5.0 V, I = 20 mA, (4) CE F I On-State Collector Current 725 - - µA C(ON) (3) d = 0.050” (1.27 mm) I = 20 mA, I = 100 µa, (4) F C V Collector-Emitter Saturation Voltage - - 0.4 V CE(SAT) (3) d = 0.050” (1.27 mm) (5) I Crosstalk - - 75 µA I = 20mA, V = 5V CX F CE Notes: (1) Solder time less than 5 seconds at temperature extreme. (2) Derate linearly 0.75 mW/°C above 25°C. (3) Distance from the assembly face to the reflective surface is “d”. (4) Measured using Eastman Kodak neutral white test card with 90% white diffuse reflectance as a reflecting surface. (5) Crosstalk (I ) is the collector current measured using the indicated current and using a Munsell N2.25 black test card against the face of the CX part. General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue E 05/2018 Page 2 © TT electronics plc Performance OPR5005 Collector Current vs Diode Forward Normalized Collector Current vs Ambient Temperature (°C) Diode Forward Current (mA) Normalized Collector Current vs Rise and Fall Time vs Load Load Resistance (Ω) Distance to Reflective Surface (mm) General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue E 05/2018 Page 3 © TT electronics plc Collector Current (mA) Normalized Collector Current Rise and Fall Time (µs) Normalized Collector Current