Electronics Finder

Description

Phototransistor Chip Silicon 2-Pin T-1
OPS665

Part Number

OPS665

Price

Request Quote

Manufacturer

TT ELECTRONICS

Lead Time

Request Quote

Category

Optoelectronics and Displays » Phototransistor

Specifications

Manufacturer

TT electronics

Manufacturers Part #

OPS665

Industry Aliases

OPS665

Sub-Category

Phototransistors

Brand

Optek Technology

Packaging

Bulk

Factory Pack Quantity

500

Datasheet

OPS665thru667-691thru698_3.pdf

1191 KiB

Download

Extracted Text

OPS665, OPS666, OPS667, OPS691, OPS692, OPS693, OPS698 OPS665 - 667 OPS691 - 693 Features:  High current transfer ratio  Low-cost plastic package OPS698  Lateral side-looking clear plastic package (OPS691, OPS692, OPS693 and OPS698) Description: Each LED/Photosensor pair in the series consists of a gallium arsenide infrared emitting diode and a NPN silicon phototransistor, mounted in a T-1 package (OPS665, OPS666, OPS667) or in a matched lateral side-looking plastic package (OPS691, OPS692, OPS693 and OPS698). Matched pairs are desirable where the application is unique and the quantity required does not justify assembly tooling costs. If separation between the LED and sensor is greater than two times the specified IC distance, proper alignment (ON) becomes critical. Although sold as pairs, emitters and sensors are packaged separately for handling ease. Please note that the sensor is sensitive to ambient light. Applications:  Non-contact reflective object sensor  Assembly line automation  Machine automation  Machine safety  End of travel sensor  Door sensor Ordering Information Part Package Lead Number Output Style Description Length Gallium arsenide infrared emitting diode (OP165) OPS665 Transistor T-1 0.50” (`1.700 mm) NPN silicon phototransistor (OP505) Gallium arsenide infrared emitting diode (OP165) OPS666 Transistor T-1 0.50” (`1.700 mm) NPN silicon phototransistor (OP505) Gallium arsenide infrared emitting diode (OP165) OPS667 Transistor T-1 0.50” (`1.700 mm) NPN silicon phototransistor (OP505) Lateral Gallium arsenide infrared emitting diode (OP140) OPS691 Transistor 0.50” (`1.700 mm) Side-looking NPN silicon phototransistor (OP550) Lateral Gallium arsenide infrared emitting diode (OP140) OPS692 Transistor 0.50” (`1.700 mm) Side-looking NPN silicon phototransistor (OP550) Lateral Gallium arsenide infrared emitting diode (OP140) OPS693 Transistor 0.50” (`1.700 mm) Side-looking NPN silicon phototransistor (OP550) Lateral Gallium arsenide infrared emitting diode (OP145) OPS698 Transistor 0.50” (`1.700 mm) Side-looking NPN silicon phototransistor (OP555) RoHS General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 1 © TT electronics plc OPS665, OPS666, OPS667, OPS691, OPS692, OPS693, OPS698 OPS665, OPS666, OPS667 1 1 2 2 LED & Diode Transistor Pin # X=0.060” (1.5 X=0” (0.0 mm) 1 Anode Emitter 2 Cathode Collector OPS691, OPS692, OPS693 1 1 2 2 LED Sensor LED Sensor Pin # Pin # X=0.060” (1.5 X=0” (0 X.= 0 0 m .0 m 6)0 ” (1.5mm) X=0” (0.0mm) 1 Cathode Emitter/Anode 1 Cathode Emitter / Anode 2 Anode Collector/Cathode 2 Anode Collector / Cathode General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 2 © TT electronics plc OPS665, OPS666, OPS667, OPS691, OPS692, OPS693, OPS698 OPS698 1 2 Pin # Diode 1 Cathode Pin # Diode 2 Anode 1 Cathode 2 Anode General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 3 © TT electronics plc OPS665, OPS666, OPS667, OPS691, OPS692, OPS693, OPS698 Electrical Specifications Absolute Maximum Ratings (T = 25° C unless otherwise noted) A Storage & Operating Temperature Range -40°C to +100°C (1) Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron] 260°C Input Diode Forward DC Current 50 mA Peak Forward Current (1 μs pulse width, 300 pps) 3.0 A Reverse DC Voltage 2.0 V (2) Power Dissipation 100 mW Output Photosensor (OPS665/666/667) or Output Phototransistor (691/692/693/698) Collector-Emitter Voltage 30 V Emitter-Collector Voltage 5 V (2) Power Dissipation 100 mW General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 4 © TT electronics plc OPS665, OPS666, OPS667, OPS691, OPS692, OPS693, OPS698 Electrical Specifications Electrical Characteristics (T = 25° C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode V Forward Voltage - - 1.6 V I = 20 mA F F I Reverse Current - - 100 µA V = 2 V R R Output Phototransistor V Collector-Emitter Breakdown Voltage 30 - - V I = 100 µA, E = 0 (BR)CEO C E V Emitter-Collector Breakdown Voltage 5.0 - - V I = 100 µA, E = 0 (BR)ECO E E Collector-Emitter Dark Current OPS665/666/667 - - 100 nA V = 15 V, I = 0, I = 0 CE F E I CEO OPS691/692/693 - - 100 nA V = 10 V, I = 0, I = 0 CE F E OPS698 - - 100 nA V = 10 V, I = 0, I = 0 CE F E Combined Collector-Emitter Saturation Voltage OPS665/666/667 - - - - - V CE(SAT) (3) OPS691/692/693 - - 0.4 V I = 20 mA, I = 50 µA F C (3) OPB698 - - 0.4 V I = 20 mA, I = 50 µA F C On-State Collector Current (3) OPS665 0.5 - - mA V = 5 V, I = 20 mA CE F OPS666 1.0 - - mA OPS667 5.0 - - mA I C(ON) (3) V = 10 V, I = 20 mA CE F OPS691 500 - - µA OPS692 1.0 - - mA OPS693, OPS698 2.0 - - mA Notes: (1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. (2) Derate linearly 1.33 mW/° C above 25° C. (3) Distance from lens tip to lens tip is 0.250” (6.35 mm) - OPS665, OPS666, OPS667 Distance from lens tip to lens tip is 0.125” (3.175 mm) - OPS691 thru OPS698 General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 5 © TT electronics plc OPS665, OPS666, OPS667, OPS691, OPS692, OPS693, OPS698 Performance OPS665, OPS666, OPS667 General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 6 © TT electronics plc OPS665, OPS666, OPS667, OPS691, OPS692, OPS693, OPS698 Performance OPS691, OPS692, OPS693 General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 7 © TT electronics plc OPS665, OPS666, OPS667, OPS691, OPS692, OPS693, OPS698 Performance OPS698 General Note TT Electronics | OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is sensors@ttelectronics.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 8 © TT electronics plc

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products